Total 203 job vacancies by Recruitment Innovations Pty Ltd

Tuff Tyres are currently looking to recruit an experienced and qualified Motor Mechanic to join their team in Cairns QLD 4870.

As a Motor Mechanic at Tuff Tyres, you will play a crucial role in repairing, maintaining, and testing motor vehicles and other internal combustion engines, along with their related mechanical components. Working closely with our service team, you will ensure that vehicles are serviced to meet their tyre and mechanical requirements. In this role, maintaining equipment and strictly adhering to Occupational Health and Safety (OHS) guidelines is essential to providing a safe and efficient work environment for everyone.

The successful candidates will need to undertake and possess:

Day to Day tasks:

- Detecting and diagnosing mechanical and electrical faults in engines and parts
- Dismantling and removing engine assemblies, transmissions, steering mechanisms and other components, and checking parts
- Repairing and replacing worn and defective parts and reassembling mechanical components, and referring to service manuals as needed
- Performing scheduled maintenance services, such as oil changes, lubrications and engine tune-ups, to achieve smoother running of vehicles and ensure compliance with pollution regulations
- Reassembling engines and parts after being repaired
- Testing and adjusting mechanical parts after being repaired for proper performance
- Diagnosing and testing parts with the assistance of computers
- May inspect vehicles and issue roadworthiness certificates or detail work required to achieve roadworthiness
- May respond to vehicle breakdown service calls
- Fit passenger, truck and ag tyres as per fitting schedule allocated by your manager.
- Inspecting tyres to determine which repair action to implement and repairing punctures in tubes and tubeless tyres
- Operating air driven equipment to remove and refit tyres and tubes on vehicles
- Balancing wheels and tyres using static and electronic equipment

Team Work:

- Open lines of communication with management and fellow co-workers.
- Report all near miss / accidents or damaged to plant / stock immediately to Management.
- Be willing and able to work within a team to achieve set targets
- Be prepared to multi-skill, i.e. job rotation “throughout the various service functions”
- Have a continuous improvement attitude, “constantly looking for better ways to do things”.
- Be responsible for cleanliness and tidiness in the service area
- Assist in the training of other personnel as required.
- Fulfil other tasks / duties as required by Management.

Environmental Health & Safety Responsibilities:

It is an important part of your job responsibilities to be familiar with and to comply with all EHS requirements as directed by Tuff Tyres Management.

- Identify potential hazards and assess the risks of the hazards prior to commencing a job. Take action to control the risk where possible or report to the supervisor where the risk is beyond the individuals’ control.
- Report all incidents immediately, even if considered minor, to the supervisor. Provide input to incident investigations and, if necessary, cooperate with return to work plans following injury.

Qualifications and Competencies:

- Good communication skills
- The ability to work within a team to achieve set targets
- Motivated and driven by results.
- Proven team player, with a focus on achieving shared company objectives.
- High level of attention to detail.

Salary range is $70,000 - $85,000pa commensurate with experience

Fulltime Position available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Apollo Fabrication Group is currently looking for qualified and experienced Welders to join their team in Young NSW 2594.

The successful candidate will need to undertake and possess:

- Fabricate structural steel as directed
- Implement quality assurance procedures and requirements
- Inspect machines and equipment prior to use
- Run machines and equipment as directed
- Being able to read and analyse blueprints and drawings
- Have the ability to weld vertically, horizontally and overhead
- Be able to weld various metals using various techniques
- Cut, roll, shape, bend, mould, spin, heat or hammer metal products to fabricate parts or sub-assemblies
- Heat treat metal parts and components
- Set up and/or operate hand and machine tools, welding equipment
- Assemble parts and structures by lining up and joining them by welding, bolting or riveting
- Finish products by cleaning, polishing, filing or bathing them in acid solutions, or by applying protective or decorative coatings

Skills & Abilities:

- Certificate III in Engineering (Welding Fabrication) or equivalent qualification
- Minimum of three years’ experience in this role or similar
- Ability to work autonomously and as part of a team
- Good communication skills
- Understanding of safe work instructions

Salary range is $70,000 - $85,000pa commensurate with skills and experience

Full-time Positions available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted.

Mick Muldoon Motorcycles are currently looking to recruit an experienced and qualified Motorcycle Mechanic to join their team in Bathurst NSW 2795.

The successful candidate will need to undertake and possess:

- Dismantle engines and repair or replace defective parts, such as magnetos, carburetors, and generators
- Remove cylinder heads, grind valves, and scrape off carbon, and replace defective valves, pistons, cylinders and rings, using hand tools and power tools
- Repair or replace other parts, such as headlights, horns, handlebar controls, gasoline and oil tanks, starters and mufflers
- Repair and adjust motorcycle subassemblies such as forks, transmissions, brakes, and drive chains, according to specifications
- Replace defective parts, using hand tools, arbor presses, flexible power presses, or power tools
- Reassemble and test subassembly units
- Disassemble subassembly units and examine condition, movement or alignment of parts visually or using gauges

Skills and Abilities:

- Certificate III in Motorcycle Mechanical Technology or equivalent
- Ideally have a minimum of 3 years’ experience as a Motorcycle Mechanic
- The ability to work in a team environment

Salary range is $70,000 - $85,000pa commensurate with experience

Fulltime Position available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

For more than 5 years the friendly staff at Kaputar Ford have been selling and servicing new and used vehicles in Narrabri and the surrounding region. Their state-of-the-art modern showroom and large display areas allow customers to casually browse the great range of Ford Vehicles. We are currently looking to recruit experienced and qualified Light Vehicle Technicians to join their team in Narrabri NSW 2390.


The successful candidates will need to undertake and possess:

- Extensive experience in repairs and maintenance in line with the manufacturers’ requirements for all make and models
- The ability to perform scheduled maintenance servicing
- The capacity to service and repair vehicles as per the repair order with the allocated time
- Good verbal and written communications skills
- Strong diagnostics capabilities


Skills & Abilities:

- Certificate III in Light Vehicle Mechanical Technology or equivalent
- Ideally have a minimum of three years’ experience as a qualified Light Vehicle Technician
- A strong knowledge of vehicle maintenance and repair
- The ability to work in a team environment


Salary range is $70,000-$85,000pa commensurate with experience

Fulltime Positions available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

On-Trac AG provide farming machinery, light construction equipment, spare parts and mechanical services across their three locations in Bathurst, Mudgee and Robin Hill. Currently they are recruiting for experienced and qualified Mechanical Engineering Technicians to join their service department in Bathurst NSW 2795.


The successful candidate will need to undertake and possess:

- Pre-delivery of new tractors
- Assembly of new attachments and hydraulic systems
- Servicing and maintenance of tractors and farm equipment
- Analyse and assess performance graphs to ensure functionality and diagnosis is in accordance with manufacturing specifications
- Dismantle defective tractors and components for repairs
- Reassemble tractors and farming machines and equipment following repair, testing operations and make adjustments
- Maintain maintenance records and adhere to work procedures and workplace policies
- Selecting correct tools and equipment for the assembling and installing of new and modified mechanical assemblies, components, machine, tools and controls and hydraulic power systems
- Ensuring works are within specifications and regulations including material costing’s, quantities, machine requirements and timeframe.

Skills and Abilities:

- Ideally have a Degree / Diploma in Mechanical Engineering or equivalent
- Minimum of 3 years or relevant experience preferably with farming machinery and equipment
- Professional, confident and positive approach to work
- OH&S awareness

Salary range is $70,000 - $85,000pa commensurate with experience

Full-time Position available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted applicants will be contacted

Kempsey Toyota are currently looking to recruit experienced and qualified Light Vehicle Technicians to join their team in Kempsey NSW 2440.

The successful candidates will need to undertake and possess:

- Extensive experience in repairs and maintenance in line with the manufacturers’ requirements for all make and models
- The ability to perform scheduled maintenance servicing
- The capacity to service and repair vehicles as per the repair order with the allocated time
- Good verbal and written communications skills
- Strong diagnostics capabilities

Skills & Abilities:

- Certificate III in Light Vehicle Mechanical Technology or equivalent
- Ideally have a minimum of three years’ experience as a qualified Light Vehicle Technician
- A strong knowledge of vehicle maintenance and repair
- The ability to work in a team environment

Salary range is $70,000-$85,000pa commensurate with experience

Fulltime Positions available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Moggys Group are currently looking to recruit an experienced and qualified Plumbers to join their team in Paget QLD 4740.


The successful candidate will need to undertake and possess:

- Designing plumbing systems and materials based on blueprints, drawings, and specifications
- Plumbing, draining, and sanitary fixtures design and installation
- Setting out and installing hot and cold water systems and water-based fire protection systems, including hydrants, hose reels and sprinklers
- The installation of sewerage and effluent pumping devices and disposal systems as well as below-ground drainage systems
- Producing and installing soil and waste stacks, metal roofing, rainwater goods and flashings as well as installing gas appliances, flues and pressure regulating devices

Skills and Abilities:

- Ideally have a minimum of 4 years’ experience as a qualified Plumber
- A Certificate III or relevant
- Ability to work in a team environment
- White Card or Equivalent

Salary range is $70,000 - $85,000pa commensurate with experience

Fulltime Positions available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Based in Shepparton Victoria 3630,  J. Furphy and Sons service a diverse range of industries such as food, dairy, brewing, chemical, petroleum, water, and oil and gas, many of which have varying acceptance criteria for surface finish, code requirements and operating conditions that require careful consideration during the design and fabrication phases of the project.
 

We are currently recruiting for several qualified and experienced Pressure Welders to join our base at Shepparton VIC 3630.


The successful candidate will need to undertake and possess:

- Perform complex mechanical installations per engineering direction.
- Read and comprehend construction drawings and specifications.
- Lay out and install piping, equipment, and other mechanical systems in compliance with construction drawings and specifications.
- Weld and repair pressure vessels and tanks to relevant standards.


Qualification and Skills:

- Certificate III in Engineering-Fabrication Trade or equivalent
- Ideally have a minimum of 3 years’ experience


Salary range is $70,000 - $85,000pa commensurate with experience

Several Full-time Positions available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted applicants will be contacted

LS Precast are currently looking to recruit an experienced and qualified Civil Engineer to join their team in Benalla VIC 3672.

The successful candidate will need to undertake and possess:

- Work with stakeholders to ensure that the design and construction methods for each element meet standards.
- Support the procurement process of plant, equipment & material to support time and budget expectations to manufacture precast concrete elements.
- Development and manage daily cost reporting against multiple elements which include but are not limited to –
raw materials, cast in items, consumables and labour.
- To provide on-site engineering support to meet program requirements.
- Provide technical knowledge for manufacturing general precast, Pre-stressed & post tensioned concrete elements.
- In conjunction with stakeholders, develop & review SWMS & work procedures to support manufacturing of precast element.
- Monitoring key precast concrete manufacturing requirements and implementing prompt corrective action if required, to ensure they are achieved in line with agreed specifications.
- Ensure that work lots are monitored and maintained to support delivery of completed units to customers.
- Support the Senior Project Engineer with accurate & timely information for current scope & any future tendered work


Skills and Abilities:

- Bachelor’s degree in Civil Engineering or related field.PE license preferred.
- 3 years of civil engineering experience.
- Proficiency in CAD and design tools.
- Knowledge of construction processes and regulations.
- Strong problem-solving, project management, and communication skills.

Salary range is $125,000 - $145,000pa commensurate with experience

Fulltime Position available



Applications open 26th of November 2024 and closes on 26th December of 2024.



If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Three Rivers Machinery are currently recruiting an experienced and qualified Supply, Distribution and Procurement Manager to join their team in Warren NSW 2824.

The successful candidate will need to undertake and possess but not
Limited to:

- Determining, implementing and monitoring purchasing, storage and distribution strategies, policies ad plans
- Preparing and implementing plans to maintain required stock levels at minimum cost
- Negotiating contracts with suppliers to meet quality, cost and delivery requirements
- Monitoring and reviewing storage and inventory, to meet supply requirements and control stock levels
- Liaising with other departments and customers concerning requirements for outward goods and associated delivery
- Overseeing the recording of purchase, storage and distribution transactions
- Demonstrates effective communication and problem-solving skills

The ideal candidates must have an eye for details; show pride in their work as well as having a ‘can do’ attitude.

Skills & Attributes

- Bachelor’s degree in supply chain management, Logistic, Business or related field required
- Minimum of three years of work experience in purchasing related field preferred.

Salary range is $80,000 - $90,000pa commensurate with experience.

Full time position available.


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted.

Cowra McDonald’s Restaurants (Maccas) are looking for great people! We are currently looking to recruit an experienced and qualified Restaurant Manager to join their team in Cowra NSW 2794

This role will suit a highly motivated, operations focused applicant who has completed LTS as a minimum has the skills to motivate a team and whilst being a professional employee but also having great fun along the way! Work directly with the licensee and get in control of your own future.

Duties and Responsibilities:

- Shift Management including training
- Set goals and action plans for the Restaurant within Shift Supervisor / Manager Responsibilities.
- Ensuring outstanding customer service and operations are a focus each day you work.
- Implementation and follow up of Food Safety procedures.
- Oversee and manage staff, with selected Department responsibilities
- Ability to achieve financial budgets.
- Maintain WH&S standards and cleanliness within the restaurant
- Ensure security is strictly always adhered to.

Skills & Experience:

- Ability to demonstrate McDonald’s KPI historical results / performance
- The ability to train and develop team members
- Proven staff management and leadership skills
- A hands-on approach
- Impeccable presentation and clear, concise communication
- A focus on policies and procedures
- A passion for delivering high standards of customer service
- Attention to detail

What we offer

- Above award salaries *great bonus scheme
- Relocation assistance available for the right candidates
- Multiple positions available
- Assured Future Career Growth
- You have total control over your career progression
- Continuous training
- National Accredited Certificate II, III and IV available
- Car/s Australian and Overseas Holidays / Corporate events all paid for.

Salary range is $65,000 - $75,000pa commensurate with experience

Fulltime Position available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If this unique opportunity sound like one you would like to pursue, please click on Apply. Only shortlisted candidates will be contacted.

Rhys Evans Farm Machinery are currently looking to recruit an experienced and qualified Mechanical Engineering Technician to join their team in Colac West VIC 3250.

The successful candidate will need to undertake and possess:

- Running and analysing diagnostic tests on a wide range of agricultural machinery/equipment and tractors (change to match what company does)
- Maintain, test and repair/replace mechanical assemblies on heavy plant/machinery and tractors (change to match what company does)
- Perform assessments and repairs in the field and workshop
- Perform preventative maintenance
- Fabricate and assemble new or modified mechanical components for products such as machinery, equipment and measuring instruments
- Work within timeframes and servicing schedules and maintain records
- Installing equipment and testing operations

Skills and Abilities:

- Ideally have Diploma in Mechanical Engineering or related
- A minimum of three years’ experience
- The ability to work in a team environment


Salary range is $70,000 - $85,000pa commensurate with experience

Fulltime Position available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

NH Foods (Thomas Borthwicks & Oakey Beef Exports) are currently looking to recruit experienced and qualified Mechanical Engineering Technicians to join their team in Mackay and Oakey.

The successful candidate will need to undertake and possess:

- Running and analysing diagnostic tests on a wide range of agricultural machinery/equipment and tractors
- Maintain, test and repair/replace mechanical assemblies on heavy plant/machinery and tractors
- Perform assessments and repairs in the field and workshop
- Perform preventative maintenance
- Fabricate and assemble new or modified mechanical components for products such as machinery, equipment and measuring instruments
- Work within timeframes and servicing schedules and maintain records
- Installing equipment and testing operations

Skills and Abilities:

- Ideally have Diploma in Mechanical Engineering or related
- A minimum of three years’ experience
- The ability to work in a team environment

Salary range is $70,000-$90,000pa commensurate with experience

Fulltime Position available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

NH Foods (Thomas Borthwicks & Oakey Beef Exports) are currently looking to recruit an experienced and qualified Skilled Meat Workers to join their teams in Mackay and Oakey. Skilled Meat Workers of all types are required but not limited to, slicers, boners etc.

The successful candidate will need to undertake:

Stuns and kills livestock
- Prepares carcasses for further processing by removing internal organs and hides
- Operates switching controls to direct and drop carcasses and meat cuts from supply rails to boning tables
- Cuts meat to separate meat, fat and tissue from around bones
- Washes, scrapes and trims foreign material and blood from meat
- Cuts sides and quarters of meat into standard meat cuts, such as rumps, flanks, and shoulders, and removing internal fat, blood clots, bruises and other matter to prepare them for packing and marketing
- Operates restrainer and stunning equipment
- Severs veins of stunned animals particularly pork to drain blood and facilitate dressing
- Trims and removes meat and servers animal carcasses
- May slaughter livestock according to procedures required by religious custom

Skills & Attributes:

- Must have minimum 2 years’ experience as a Skilled Meat Process Workers
- Certificate III in Meat Processing or related Qualification
- OH&S awareness
- Ability to work in a team environment

Salary range is $60,000-$85,000pa commensurate with experience

Fulltime Positions available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Gisborne Collision Centre provides confidence in restoring vehicles to manufacturing specifications and pre-accident conditions, using the latest equipment to ensure the highest quality finish. The company is currently seeking to recruit qualified and experienced Panel Beaters to join their team in Gisborne VIC 3437.

The successful candidate will need to undertake and possess:

- Remove damaged panels and parts, and remove upholstery and accessories to gain access
- Remove dents by hammering panels
- Straighten damaged vehicles and parts using mechanical and hydraulic equipment
- Replace badly damaged sections with new or second-hand panels
- Fill depressions with plastic filler, and filing, grinding and sanding repaired surfaces
- Cut and join replacement sections using welding equipment
- Fit repaired or replacement panels on vehicles and refit body hardware such as door locks and trims
- Assist vehicle body builders in constructing and restoring custom-designed, vintage and other specialty vehicles
- Assist spray-paint vehicles

Skills & Abilities:

- Certificate III in Automotive Body Repair Technology or equivalent
- Ideally have a minimum of three years’ experience as a qualified Panel Beater
- A strong knowledge of vehicle maintenance and repair
- The ability to work in a team environment

Salary range is $70,000-$85,000pa commensurate with experience

Fulltime Position available

Applications open on 26th of November 2024 and closes on 24th of December 2024

If you are interested in this role APPLY now. Only shortlisted candidates will be contacted