Total 309 Transportation / Logistics job vacancies in Fort Drum, New York

Under the general direction of the Principal Inspector or Supervisory Principal Inspector accomplishes the following duties:

A. Technical Administration

On a continuing basis, ensures assigned organizations are properly and adequately organized, staffed and equipped; establishes and conducts adequate training programs; maintains record keeping systems; and facilities and ensures procedures meet all regulatory requirements.

Chairs joint Federal Aviation Administration (FAA) and industry meetings. Maintains regular contact with organizations assigned and coordinates with top management officials. Requires or directs correction of any deficiencies/discrepancies and refuses or withdraws approval if they cannot be resolved.

Responsible for conducting enforcement investigations and preparation of final reports and recommendations on disposition. Performs or supervises the emergency suspension of certificates or cancellation of operations specifications. Conducts or directs the reexamination of certificated airmen or recertification of an operator or agency.

Conducts investigations of public complaints, congressional inquiries, and aircraft incidents and accidents. Provides verbal and/or written technical assistance to legal counsel, testifies at court trials and formal hearings, and gives dispositions.

Coordinates minimum equipment list (MEL) approvals with the principal inspector. Takes enforcement action in instances of noncompliance with the MEL.

Coordinates with geographic inspectors for the accomplishment of non-routine air carrier surveillance.
Assists Principal Inspector in the planning and implementation of certificate holders surveillance via usage of the appropriate safety system.

B. Certification

Approves/accepts or disapproves/rejects manuals and revisions to such manuals. May require amendments to previously approved manuals to accomplish the following: correct any conflict with regulatory requirements; eliminate unsafe practices: and/or improve the specificity of instruction.

Evaluates training programs to ensure that they meet the requirements of 14 CFR. Approves or disapproves these training programs including flight simulators, training devices, or other such equipment used in these programs.

Approves/disapproves designation of check airmen and makes recommendations on the appointment of designees.
Evaluates operations and facilities by on-site inspections and review of reports by geographic inspectors or others. Negotiates changes essential or desirable in their policies and procedures. Determines the appropriate methods and/or plans for securing corrective action and determines through on-site inspection or inspector reports the effectiveness of any action.

Evaluates and approves/disapproves requests to operate under conditions not previously authorized and may prescribe additional conditions and limitations as appropriate.

Approves the original issuance of operations specifications and issues original operating certificates. Approves amendments to operations specifications. Evaluates the safety of proposed changes in route or airport authorizations; prescribes any changes required before approval.

Directs or participates in flight evaluations to determine compliance with 14 CFR. Recommends changes that will be required prior to approval.

Duties and Responsibilities continued below

Serves as an engineer within the Federal Aviation Administration. In this capacity, directly participates in and is responsible for planning, developing, reviewing, and evaluating major aviation safety research initiatives. Uses professional engineering principles on a wide variety of research efforts that lead to a safe, efficient, and cost-effective National Airspace System (NAS) through the research & development of innovative aviation technologies.

Develops and implements independent and interdependent engineering studies to resolve issues and/or identify problems. Analyzes, tests and evaluates operational and technical information; identifies, mitigates or resolves current or potential problems with systems. Evaluates existing/proposed policies, standards, requirements, and objectives for efficient performance of programs and systems. Evaluates state-of-the-art technology, aerospace engineering concepts, and potentially useful tests and evaluations internal and external to FAA. Analyzes trends, developments, and performance data. Determines compatibility with established/planned systems and their desirability and effectiveness. Identifies requirements for new or modified standards, objectives, policies, or system modifications.

Submits fully documented recommendations for systems acquisition, approval, and/or modification to supervisor. Functions as Contracting Officer's Representative (COR) during the acquisition and procurement cycle. Participates in a team that reviews contractor proposals for adequacy of design, and for operation, maintenance, and implementation procedures. Conducts feasibility, cost-benefit, and other studies for technical and fiscal adequacy. Submits evaluations and recommendations to Contracting Officer.

Participates and contributes to an interdisciplinary team of technical experts to develop, test, evaluate, and/or implement aircraft systems and/or components that impact the NAS. Represents the organizational unit at various seminar, committee, user group panel, and conference meetings at intraagency, interagency, aviation industry, and national levels.

Coordinates and provides technical guidance to managers and sponsors. Identifies existing or potential problems. Assists in defining requirements, proposes alternatives, and coordinates solutions with sponsors. Provides periodic status reports to supervisors. Identifies existing/potential problems which may impact on established or proposed plans, identifies alternatives, and provides recommendations. Conducts administrative or on-site comprehensive reviews of existing or proposed projects; verifies cost estimates with managers throughout the FAA. Identifies questionable parts of proposals or procedures. Develops funding documents and/or schedules and milestones.

Performs multiple, varying, and complex assignments under the limited direction of a manager, project/program manager, team leader, or more experienced engineer. Acts as a contributing specialist on large work activities or as a team leader for single or small work activities.

Provides guidance to lower-level staff to solve difficult technical issues. Resolves all but unique technical problems without the intervention of management or a more experienced engineer. Identifies and informs management of problems that require their attention. Often develops and recommends techniques to address problem situations.

Defines, plans, and organizes assigned resources to accomplish organizational objectives. Allocates resources to accomplish small work activities within established schedules.

Serves as an engineer within the Federal Aviation Administration. In this capacity, directly participates in and is responsible for planning, developing, reviewing, and evaluating major aviation safety research initiatives. Uses professional engineering principles on a wide variety of research efforts that lead to a safe, efficient, and cost-effective National Airspace System (NAS) through the research & development of innovative aviation technologies.

Develops and implements independent and interdependent engineering studies to resolve issues and/or identify problems. Analyzes, tests and evaluates operational and technical information; identifies, mitigates or resolves current or potential problems with systems. Evaluates existing/proposed policies, standards, requirements, and objectives for efficient performance of programs and systems. Evaluates state-of-the-art technology, aerospace engineering concepts, and potentially useful tests and evaluations internal and external to FAA. Analyzes trends, developments, and performance data. Determines compatibility with established/planned systems and their desirability and effectiveness. Identifies requirements for new or modified standards, objectives, policies, or system modifications.

Submits fully documented recommendations for systems acquisition, approval, and/or modification to supervisor. Functions as Contracting Officer's Representative (COR) during the acquisition and procurement cycle. Participates in a team that reviews contractor proposals for adequacy of design, and for operation, maintenance, and implementation procedures. Conducts feasibility, cost-benefit, and other studies for technical and fiscal adequacy. Submits evaluations and recommendations to Contracting Officer.

Participates and contributes to an interdisciplinary team of technical experts to develop, test, evaluate, and/or implement aircraft systems and/or components that impact the NAS. Represents the organizational unit at various seminar, committee, user group panel, and conference meetings at intraagency, interagency, aviation industry, and national levels.

Coordinates and provides technical guidance to managers and sponsors. Identifies existing or potential problems. Assists in defining requirements, proposes alternatives, and coordinates solutions with sponsors. Provides periodic status reports to supervisors. Identifies existing/potential problems which may impact on established or proposed plans, identifies alternatives, and provides recommendations. Conducts administrative or on-site comprehensive reviews of existing or proposed projects; verifies cost estimates with managers throughout the FAA. Identifies questionable parts of proposals or procedures. Develops funding documents and/or schedules and milestones.

Performs multiple, varying, and complex assignments under the limited direction of a manager, project/program manager, team leader, or more experienced engineer. Acts as a contributing specialist on large work activities or as a team leader for single or small work activities.

Provides guidance to lower-level staff to solve difficult technical issues. Resolves all but unique technical problems without the intervention of management or a more experienced engineer. Identifies and informs management of problems that require their attention. Often develops and recommends techniques to address problem situations.

Defines, plans, and organizes assigned resources to accomplish organizational objectives. Allocates resources to accomplish small work activities within established schedules.

• Repair rotary wing aircraft engines
• Perform ground operational checks
• Determine replacement or maintenance required
• Complete maintenance forms and work orders

Technical Program Support

• Processes FAA issued airman certificates such as ground instructor, flight instructor, mechanic, repairman, and flight engineer.
• Interviews applicants to determine qualifications for non-complex certificates.
• Processes FAA authorizations such as inspection authorization, aircrew program designee, and aerobatic competency.
• Processes FAA issued operator and air agency certificates such as air carrier, repair stations, and approved schools.
• Examines applications and supporting documents for completeness, consistency of information, and assures correctness, if required.
• Responsible for processing temporary airman certification files for certificates issued by designated examiners.
• Examines applications and supporting documents for completeness, consistency of information, and fulfillment of Federal Aviation Regulations (FAR) requirements.
• Supports the Designated Written Test Examiner (DWTE) program by providing orientation and training of new examiners, providing required annual and periodic training as necessary.
• Conducts FAA written examinations by assembling and distributing test materials, and following up to ensure corrective action is taken if necessary.

Correspondence and Reports

• Researches, writes, and types non-technical and routine technical correspondence.
• Responsible for maintaining correspondence control and suspense files.
• Reviews outgoing correspondence for grammatical accuracy, procedural agreement, aircraft technical manuals and factual inconsistencies, attachments, enclosures, dates, and signatures.

General Office Support

• Responsible for assigned administrative and technical files such as certificated operator and designee case files in accordance with agency directives.
• Determines need for new files, initiates action to create files, prepares file folders, dividers, and labels.
• Maintains administrative/technical library with includes orders, notices, Federal Aviation Regulations (FARs), Master Minimum Equipment Lists (MMELs), aircraft technical manuals and advisory circulars, etc.
• Assures that charts and office logs are kept current.
• Coordinates organization’s schedule with regard to inspectors’ schedules, flight checks, exams, itineraries and coordinates supervisor’s appointment schedule.
• Prepares time and attendance forms for organization personnel, maintain supporting documentation, and submit to appropriate payroll office.

Communication

• Receives incoming telephone calls, answers inquiries, and directs incoming calls appropriately. Interacts with the public (both domestic and foreign, when applicable) and other FAA offices.
• Assists visitors, determines needs and provides information or refers as appropriate.

Automation Program Support

• Assembles and enters information into various automated programs (such as Program Tracking and Reporting Subsystems (PTRS), Operations Specifications Subsystems (OPSS), Vital Information Subsystem (VIS), and Enforcement Information System (EIS)) and retrieves, prints, and reviews output.
• Retrieves data concerning airmen records, certificates, violation histories and aircraft registrations for National Data Base (NDB) and EIS database systems.
• Generates routine or ad hoc reports such as inspector planned activity, quarterly work program accomplishment report, quarterly NPG report, and inspector open items.

Administrative Program Support

• Surveys organization to which assigned in order to ensure adherence to administrative procedures that are outlined in agency directives.
• Examines current procedures and practices and recommends or implements changes.
• Instructs organization personnel (including new employees) on proper administrative procedures.
• Reviews program participants’ medical and flight check currency records and advises supervisor of program participants’ status.

Fiscal Program Support

• As impress fund cashier, reviews requests, and receipts, disperses funds, updates records, maintains vouchers, and determines replacement of funds.

• Provide warehouse and supply support to military, civilian, and contractor personnel assigned, stationed or within the installation and the assigned Area of Responsibility.
• Administer the retail supply programs, including such functions as inventory management, warehouse and storage management, stock control requirements determination, receipt and issue of supplies, oils and lubricants, and hazardous material.
• Perform independent systems analysis of complex programs and major problems associated with supply systems and logistics information systems.
• Supervise assigned employees and provide program oversight of contractors in seven separate installation supply work centers.
• Plan work to be accomplished by subordinates; set and adjust short-term priorities; prepare schedules for completion of work; and assign work to individual employees based on priorities.
• Serve as policy advisor and Subject Matter Expert on all matters relating to the installation supply program.
• Provide contract oversight as a designated Alternate Contracting Officer’s Representative (COR).
• Work with the assigned COR in coordination with the Quality Assurance Evaluation staff, including, reviewing, monitoring, and evaluating contractor performance and customer service in the Installation Supply branch.

• Coordinate all supply and services support provided for mobilization/demobilization, contingencies, national disasters/emergencies, for intel, cyber and signal missions of units.
• Advise leadership on matters concerning contingency, mobilization, demobilization, emergencies, national disasters, and reserve component logistical issues.
• Ensure coordination of mobilization, disaster, or other emergency plans.
• Research, analyze, develop, coordinate, edit, and publish all logistical portions and annexes to installation contingency, mobilization and demobilization and reserve component directives, plans and other materials.
• Monitor and evaluate unit readiness/status reports of mobilizing units to determine if discrepancies exist and facilitate unit corrections.
• Research supply support problems and issues and recommend procedures and methods for improving or correcting the situation.
• Visit activities, unit/sites, and other subordinate elements to instruct, advise, and assist staff and unit logistical personnel in supply practices and procedures pertinent to equipment, supplies, and services.
• Compile, analyze, and report a variety of logistical information to determine the most efficient and cost-effective means to accomplish desired results.
• Maintain surveillance of supply readiness for users of assigned systems and take immediate corrective action in case of mission impairment due to supply shortages.

Duties include but are not limited to:
- Responsible for the utilization and maintenance of all automobiles, trucks, buses and special purpose vehicles and equipment owned by or leased to VAWNYHS (Batavia).
- Keep continuously aware of VAWNYHS (Batavia) needs and weather conditions, making available and scheduling vehicles accordingly, and carries out directions, policies and procedures issued by the Engineering Manager.
- Participates with his/her supervisor in the selection, promotion or reassignment of staff and recommends disciplinary actions and incentive awards, plans for improving work performances and training programs.
- Organizes and directs staff in productive daily work schedules, and accomplishes work within established policies of EMS.
- Responsible for ordering and stocking repair parts, supplies, materials, and equipment and participates in preliminary planning of budget for various control points.
- Creates 1358's for all transportation costs.
- Responsible for the maintenance of Medical Center and GSA rental vehicles.
- Responsible for compiling all scheduled vehicles inspection providing upkeep and maintenance services and submitting monthly cost figures to invoice GSA lnteragency Motor Pool, Buffalo, N.Y. for all services and materials provided by VAWNYHS (Batavia).
- Be familiar with spraying and application techniques as well as pesticide use and other controls used in a ground maintenance management.
- Oversee contractors ensuring the safe usage of any materials being used.
- Responsible for the safe and efficient operation of all grounds and snow removal equipment, such as road sweeper, lawn sweeper, salt spreader, flail mower, Bobcats 553, 5528, and 873, power washer, and portable generators.
- Responsible for administering road tests, grading applicants, maintaining records of authorized drivers and conducting a search of the driver's background through the National Driver Request Program.
- Instructs subordinates in the safe and efficient operation of such complex equipment as pay loaders, snowplows, tractors with backhoe, front-end loader and gang-mowers.
- Responsible for all work and documentation to insure the section under his/her direction is in compliance with all regulatory agencies, including but not limited to Joint Commission, GSA, OSHA and all life safety standards.
- Creates and presents reports as required by the department and various regulatory agencies.
- Provides technical expertise and consultative advice to the Assistant Director (Batavia site manager) and the Chief of EMS.
- Comments and makes recommendations as needed to address issues with existing conditions, work assignments, costs, energy savings, and maintenance of items.
- Assigns and dispatches vehicles on a daily basis for all patient, employees and staff trips using up to 25 different vehicles.
- Investigates all accidents and makes out reports sending them to District Counsel.
- Responsible of all repairs and maintenance of all equipment, tools and motorized equipment used by the transportation and EMS section.
- Required to act in the capacity of a Service Manager in assessing mechanical failure on vehicles and equipment.
- Maintains documentation and can account for all services and materials provided by VAWNYHS/Batavia which will be billed to GSA Motor Pool, Buffalo NY.
- Assures that all vehicles and equipment are performing efficiently and that safety items such as tires, brakes, light, etc. are in proper working order.
- Responsible for the upkeep of 48.8 acres of land which consists of 36 acres of lawns to be cut and trimmed, also includes the New York State Nursing
Home.
- Responsible for the removal of debris from all walks, stairs and stairwells, the removal of all trash and debris from VAWNYHS (Batavia) grounds. The removal of ice and snow in all parking lots, walks, and stairs during the winter months is managed by the incumbent.
- Responsible for supervisory oversight which includes environmental sanitation, waste management, and basic pest functions.
- Coordinates logistical support for interior design activities, and for setups and movement for furniture/furnishings.
-Makes daily inspections of areas serviced by Aids to insure adequate coverage and proper work performance, observes quantity and quality of work performed by housekeeping staff and work leaders advising them of conditions that do not meet prescribed standards and regulatory requirements.
-Responsible for the control, use and maintenance of numerous pieces of environmental sanitation equipment such as automatic floor scrubbers, vacuums, buffers, burnishers, and carpet extractors.
- Other duties as assigned.

Work Schedule: Monday - Friday, 6:00 AM to 2:30 PM. May work evenings, weekends and holidays based on agency needs
Position Description Title/PD#: Motor Vehicle Operator Supervisor/PD095110
Relocation/Recruitment Incentives: Not authorized

• Develops briefings at program level, tracks data/claims trends, improvements, and claims resolutions to identify areas of potential improvements and best practices.
• Utilizes various claims and transportation automated systems in order to resolve issues and answer claimants questions.
• Investigates and develops supporting evidence for loss and damage claims arising from storage and movement of personal property and makes recommendations for use in affixing responsibility and settlement of claims.
• Determines and advises customers on entitlements or procedures related to temporary storage of goods, weight allowances; prohibited items; and shipment of personal property including various methods available.
• Plans, books, and routes personal property, estimates cost savings, time involved, time of arrival, storage in transit involved, and purposes.
• Prepares and process various applications for transportation or storage of a wide range of personal property and privately owned vehicles, including special items, of authorized civilian and military members.
• Makes detailed cost comparisons to determine the best and most economical method of movement, and screens movement documents for correct accounting data.

As a SUPPLY MANAGEMENT SPECIALIST, GS-2003-09, you will serve as a Supply Management Specialist in a developmental capacity.

This Supervisor Transportation Security Officer position is located at Ft. Lauderdale-Hollywood International Airport (FLL), Transportation Security Administration, Department of Homeland Security (DHS). As a Supervisory Transportation Security Officer (STSO), you will be responsible for mitigating actual and potential threats against civil aviation and other transportation modes. You will also perform and supervise in your area of specialty, which may include Transportation Security Officers (TSOs) and Lead Transportation Security Officers (LTSOs) in the performance of all security functions related to the screening of people, property, and cargo through the use and application of procedures, techniques, and technology. In addition, you will make independent, security-based decisions using intelligence, critical thinking, experience, observation, and passenger engagement. Typical duties include, but are not limited to:

• Conducting and supervising subordinate employees in conducting pre-board security screening of persons, their carry-on and checked baggage/cargo.
• Overseeing screening checkpoint(s) and/or baggage screening operations on a day-to-day basis to include equipment, personnel, and the scheduling and rotation of personnel.
• Participating in the development of new policies and procedures, and recommending changes in policy and procedures based on observation of work, as required.
• Participating in the development of strategic planning initiatives, workforce planning, succession planning initiatives, and other reports and documents for TSA and superiors.
• Engaging in continuous development of critical thinking skills necessary to mitigate security threats by identifying, evaluating, and applying appropriate situational options and approaches.
• Preparing various types of communications such as morning briefings, checkpoint logs, reports, and documents that are germane to the work performed.
• Developing incident information and reports for Law Enforcement Officers (LEOs) and superiors.
• Serving as a member of the National Screening Force.

The primary purpose of this position is to as an Air Reserve Technician (ART) officer position, to serve as an assistant to the Maintenance Group Commander and as such, reviews policy and assists the Senior ART/Maintenance Group (MXG) Commander in planning, organizing, coordinating, directing, and controlling all activities and operations of the Maintenance Group. Incumbent receives experience, training, and instruction in providing overall staff direction to all Maintenance Group programs.

RESPONSIBILITIES:
1. In conjunction with the MXG Senior Art/Commander plans, direct, organizes, manages, and provides oversight for activities in the Maintenance Group. Responsible to the Maintenance Group Senior ART/Commander in integrating, and executing all aspects of the assigned maintenance activities/programs within cost, schedule, performance and/or system supportability requirements.
2. Represents the Maintenance Group Commander at a variety of installation and functional area organizational meetings. Establishes, develops, and maintains effective working relationships with other group commanders, representatives and senior staff at Numbered Air Force, HQ AFRC, gaining MAJCOMs, and Air Staff.
3. Ensures effective operation of the aircraft maintenance complex. Make periodic and comprehensive assessment of program through a review of performance indicators, productivity goals and accomplishments, deficiency reports, audit findings, etc.
4. Accomplishes special staff studies, projects and initiatives resulting from legislative and regulatory changes, reengineering efforts, new technology, privatization, program/mission changes, etc. Identifies the need for studies, establishes goals and objectives, and designates working group(s) as needed.

As a SUPPLY TECHNICIAN, GS-2005-7, you will perform the following duties and responsibilities:

• Identifying and resolving customer complaints.
• Notifying supervisor of persistent violations of standard procedures.
• Analyzing customer complaints for trends or evidence of systemic problems.
• Serving as the point of contact for customers with supply and service problems.
• Following up to ensure issues have been resolved to the satisfaction of the customers and supervisor.
• Making regular contact and visits with other organizations to gather information and resolve supply problems.
• Recommending corrective action and/or advising the Supply System Analyst of problems requiring in depth systematic analysis.
• Providing input to supervisors and program managers to correct procedural problems on automation and improve overall operations.
• Performs other related duties as assigned.

• Plans and schedules maintenance necessary to meet emergency and regular workload requirements.
• Coordinates vehicle maintenance requirements.
• Maintains the On-Line Vehicle Interactive Management System (OLVIMS). Inputs vehicle repair requirements to OL VIMS.
• Performs file maintenance and parts and file reconciliations.
• Performs veliicle management functions such as preparing slides, charts, briefings and reports.

As a SUPPLY MANAGEMENT SPECIALIST, GS-2003-09, you will serve as a Supply Management Specialist in a developmental capacity.