Total 73 Quality Assurance / Control job vacancies in New York 601 Lex

Under the general direction of the Principal Inspector or Supervisory Principal Inspector accomplishes the following duties:

A. Technical Administration

On a continuing basis, ensures assigned organizations are properly and adequately organized, staffed and equipped; establishes and conducts adequate training programs; maintains record keeping systems; and facilities and ensures procedures meet all regulatory requirements.

Chairs joint Federal Aviation Administration (FAA) and industry meetings. Maintains regular contact with organizations assigned and coordinates with top management officials. Requires or directs correction of any deficiencies/discrepancies and refuses or withdraws approval if they cannot be resolved.

Responsible for conducting enforcement investigations and preparation of final reports and recommendations on disposition. Performs or supervises the emergency suspension of certificates or cancellation of operations specifications. Conducts or directs the reexamination of certificated airmen or recertification of an operator or agency.

Conducts investigations of public complaints, congressional inquiries, and aircraft incidents and accidents. Provides verbal and/or written technical assistance to legal counsel, testifies at court trials and formal hearings, and gives dispositions.

Coordinates minimum equipment list (MEL) approvals with the principal inspector. Takes enforcement action in instances of noncompliance with the MEL.

Coordinates with geographic inspectors for the accomplishment of non-routine air carrier surveillance.
Assists Principal Inspector in the planning and implementation of certificate holders surveillance via usage of the appropriate safety system.

B. Certification

Approves/accepts or disapproves/rejects manuals and revisions to such manuals. May require amendments to previously approved manuals to accomplish the following: correct any conflict with regulatory requirements; eliminate unsafe practices: and/or improve the specificity of instruction.

Evaluates training programs to ensure that they meet the requirements of 14 CFR. Approves or disapproves these training programs including flight simulators, training devices, or other such equipment used in these programs.

Approves/disapproves designation of check airmen and makes recommendations on the appointment of designees.
Evaluates operations and facilities by on-site inspections and review of reports by geographic inspectors or others. Negotiates changes essential or desirable in their policies and procedures. Determines the appropriate methods and/or plans for securing corrective action and determines through on-site inspection or inspector reports the effectiveness of any action.

Evaluates and approves/disapproves requests to operate under conditions not previously authorized and may prescribe additional conditions and limitations as appropriate.

Approves the original issuance of operations specifications and issues original operating certificates. Approves amendments to operations specifications. Evaluates the safety of proposed changes in route or airport authorizations; prescribes any changes required before approval.

Directs or participates in flight evaluations to determine compliance with 14 CFR. Recommends changes that will be required prior to approval.

Duties and Responsibilities continued below

As an QUALITY ASSURANCE SPECIALIST, GS-1910-11, you will:

• Determine the proficiency and qualifications of certified personnel.
• Make decisions and recommendations on technical concerns presented by supervisors.
• Ensure that quality considerations are addressed and requirements achieved for all aircraft maintenance work and support functions to ensure end items perform as intended with reliability.
• Serve as the Quality Assurance Specialist for the planning, implementation and execution of a quality assurance program that includes the full range of quality principles, concepts, inspection techniques, surveillance and evaluation.
• Perform other duties as assigned

• YOU WILL/MAY:
• Ensure that regulated establishments produce a safe product by executing appropriate inspection methods, determining non-compliance with regulatory requirements, documenting noncompliance and initiating enforcement action, where warranted.
• Verify that meat and poultry slaughter and/or processing establishment's Sanitation Standard Operating Procedures (SSOP) and Hazard Analysis and Critical Control Point (HACCP) Plans meet regulatory requirements.
• Execute Sanitation Standard Operating Procedures (SSOP) and Hazard Analysis and Critical Control Point (HACCP) Plans effectively to prevent unsanitary conditions and adulteration of product.
• Review records, observe plant operations and conduct hands-on verification to ensure compliance with regulatory requirements and prepare detailed documentation (Non-Compliance Records) of non-compliance with regulatory requirements.
• Determine when regulatory control action is necessary. You will assess whether the plant's corrective or preventative actions are acceptable and effective, if there are trends in non-compliance, or if enforcement action is warranted.
• Conduct regulatory oversight activities inside plants in matters relating to other consumer protections (e.g., economic adulteration and misbranding).
• Have contact with plant managers, owners and others to explain legal and regulatory requirements, discuss operation of the plant's SSOP, HACCP plan and other food safety programs.
• Communicate and defend determinations on non-compliance issues and discuss plans for addressing non-compliance.
• Work with a variety of individuals to resolve problems, clarify differences of interpretation concerning HACCP and other food safety or consumer protection requirements.
• Advise other Agency inspectors, supervisors and officers on inspection and enforcement matters for which you are involved.
• Conduct various samplings, surveys and tests to obtain pertinent data on potential problem areas, industry trends, or other issues of current interest to the Agency.
• Be involved in performing health and safety verification sampling and tests for detection of specific microbes (e.g., salmonella, listeria, etc.), residues or contaminants.
• Assure that products approved for import are in full compliance with all applicable Federal regulations governing the importation of meat and poultry products.
• Authorize entry of all meat or poultry products considered to comply with Federal regulations or refuse entry of any products which violate any of the requirements for admission into this country.
• Coordinate with other Federal agencies (e.g., the Animal and Plant Health Inspection Service (APHIS) and U.S. Customs and Border Protection (CBP) on such matters as animal health restrictions and refused entry lots.

• Performs duties associated with the administration of the quality assurance provisions of contracts by designing, implementing, and maintaining a risk-based surveillance program and assessment plan.
• Identifies opportunities for process improvements through analysis of process measurement data.
• Serves as a member of a multi-functional or technical team. Responsible for implementing the overall Quality Program for a diversity of products and services in support of U.S. Government acquisition at one or more supplier’s facilities.
• Ensures contractor compliance with all requirements related to the design, manufacturing, repair, overhaul, and modernization of a variety of items for contractor and customer activities throughout the world.
• Independently performs audits/surveillance of contractor’s processes to ensure customer and contractual requirements are met.
• Investigates and provides data on customer complaints/concerns regarding contractor’s quality performance and processes which impact user satisfaction.
• Provides technical support to all other DCMA team members, assisting in the analysis of contract related issues to determine the best course of action to support the contractor and customers.

The purpose of the position is to serve as an inspector of surface maintenance vehicles and equipment to ensure that physical and operating characteristics are within acceptable standards and specifications. Duties involve complex inspection work, requiring a wide variety of inspection processes and techniques, at remote worksites or field installations where a supervisor is not readily available. In these situations, work is performed very independently and decisions require a wide range of subjective judgments.

Duties & Responsibilities:

• Oversee and guide the Quality team to ensure effective quality control across the entire warehouse department.
• Collaborate with the Warehouse Manager to review and refine work instructions, ensuring clear and efficient operational procedures.
• Plan and conduct education and training programs to enhance the skills and knowledge of warehouse staff.
• Identify challenges in warehouse operations, analyze root causes, and implement solutions to improve quality and organizational efficiency.
• Develop and implement Kaizen (continuous improvement) strategies to enhance processes within the warehouse department.
• Plan and execute Internal Quality Assurance activities across all warehouses to maintain high-quality standards.
• Support the warehouse department in meeting and exceeding customer quality expectations.
• Manage the tasks and attendance of Quality team members, ensuring efficient and productive operations.
• Foster collaboration with managers and staff across Sankyu and other warehouses to optimize organizational performance.

Requirements:

• Diploma / Degree in Engineering and QMS related field with min 2 years of relevant experience
• Team player, good interpersonal and communication skills, able to work independently
• Good knowledge in ISO related management systems
• Candidate must possess at least Professional Certificate/NiTEC, Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Bioengineering/Biomedical), Engineering (Environmental/Health/Safety), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical), Logistic/Transportation or equivalent.
• Working location: Tuas (**Shuttle service is provided from/to Tuas West Road MRT**)

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

Position overview

We are seeking a highly skilled and motivated Senior Software Engineer to join our planning and control team. As part of this team, you will work on cutting-edge research and development of planning algorithms that enable autonomous systems to navigate complex environments safely and efficiently. This is an exciting opportunity for individuals who are passionate about advancing the field of autonomy and robotics. You will play a key role in the design, development, and optimization of behavior and motion planning systems while collaborating closely with cross-functional teams.

Role responsibilities

• Improve the existing software architecture and design the right software architecture for new components
• Design and develop clean, fast, reliable code
• Implement advanced features for autonomous vehicles
• Uphold code quality continuous integration, automated testing, and code reviews
• Drive software engineering best practices and processes
• Create technical design documents
• Mentor other software engineers

Required experience

• Bachelor's or Master's degree in Computer Science, Robotics, or related fields
• 5+ years experience writing production-quality code in modern C++
• Understanding of behavior planning, decision-making frameworks (e.g., finite state machines, behavior trees), or related AI techniques.
• Experience with Motion Planning algorithms, such as RRT, RRT*, and other graph-search based algorithms
• Experience developing in a Linux environment
• Strong organization and communication skills
• Flexible problem-solver
• Bonus experience
• Experience with ROS or other similar middleware
• Experience with real world safety critical applications
• Experience deploying software tools and/or metrics

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!

Duties & Responsibilities

• Coordinate with Engineering, Construction, Procurement and Project groups to review the scope of work in terms of deliverables to be submitted to the client, to finalize schedules to be met, and utilize resources required as percontract.
• Perform schedule monitoring and updating of project schedule, preparation of periodic Progress Reports with commitments & forecasts. Propose corrective actions and follow-up.
• Prepare various Weekly/Monthly Progress Reports.
• Analyse Subcontractor’s progress report, identify and highlight schedule deviations and delay.

Education Qualifications and other Requirements

• Degree with extensive Project Control experience on major projects working in a contractor environment is preferable.
• Excellence in Microsoft Excel, Microsoft Project and Primavera version 6 (and above) application is a must.
• Minimum 6 to 7 years planning & scheduling in EPC sector is a must.
• Familiar with standard software programs, developing S-Curve Schedule, bar-charts and manpower histogram is a must.

Skill Requirements

• Demonstrated success in past project involvement and technical delivery of medium to large size projects.
• Possesses wide and diversified knowledge of project control system, scheduling and planning techniques in the Oil & Gas and Petrochemical Industry, in particular EPC.
• Quality & Safety Awareness / Accountability.
• Organisational Alignment.
• Technical Skill & Work Performance.
• Teamwork (Cooperation and Coordination).
• Effective Communication.
• Integrity and Trust.

Supervises a staff of Air Traffic Control Specialists that is responsible for carrying out air traffic control assignments within a geographic area.

Plans and assigns work to be accomplished by subordinate employees. Sets work priorities and schedules. Approves leave; gives advice, counsel, and instruction to employees on both work and administrative matters. Evaluates performance of employees and recommends performance ratings. Hears and resolves complaints from employees and refers group grievances and more serious unresolved complaints to a higher-level manager. Identifies and arranges for developmental and other training needs of employees. Finds ways to improve production or increase the quality of the work directed. Adjusts staffing levels and work procedures to accommodate resource decisions made at higher levels. Recommends goals and objectives for the area and tracks accomplishments.

Communicates and reinforces diversity and EEO policies and programs in all areas of responsibility, including selections, training, and transfers. Supports and participates in the labor management partnership process and fosters a work environment where all employees are treated in a fair and equitable manner.

The Operations Supervisor reports to the Operations Manager. Performance is evaluated upon the effectiveness with which assigned program objectives are achieved.

As a Theater Aerospace Operations Command an Control Officer, GS-2101-13, you will monitor and oversee the planning, organization, and supervision of all unit programs required by Air Force, Major Command, and ANG regulations in the training and employment of the force level Air and Space Operations Center (AOC) weapons system. The Operations Director must ensure AOC weapons systems personnel are capable of operating in a United States-only, North Atlantic Treaty Organization (NATO), or a tailored alliance environment. The incumbent requires mastery level knowledge of air campaign strategy, combat plans, and combat operations. Must be trained and able to function in a senior level position in a joint/coalition AOC reporting to the Joint Force Air Component Commander (JFACC) at the 3-star level. Accordingly, the incumbent must direct preparation for members to function at the operational level of war in an AOC. This responsibility mandates a working knowledge of all Air Force Weapon Systems and their capabilities, as well as a clear understanding of the systems and capabilities of sister services, NATO nations, and other coalition partners. This level of knowledge is required to sustain the development and execution of a daily Air Tasking Order for a minimum of 30 days at 500 missions per day. The incumbent directs and supervises a staff whose functions affect the day to day operation and administration of an AOC, which is the senior element of the Theater Air Control System (TACS). In addition to supervisory responsibility, the incumbent possesses rated or air battle management experience and maintains AOC positional certification. Must qualify for and maintain a TS/SCI clearance.

Serves as a Operations Manager (OM) in a Large TRACON, responsible for planning and directing operations. The incumbent may be requested to provide direct support to the Air Traffic Manager. In the terminal option, the OM provides first-line supervision to assigned Operation Supervisors (OS) and Traffic Management Coordinators (TMC), if applicable. The OM provides second-line supervision to Air Traffic Control Specialists (ATCS). The OM is responsible for operational services of the facility including traffic management initiatives. Provides training, coaching, and guidance to subordinates and facilitates team building throughout his/her area(s) of responsibility. Integrates support resources with operational needs to maintain effective ATC service, and may work other than administrative shifts to meet this requirement. Using measures of organizational performance, the OM continuously reviews work processes to assure that results meet the agency's mission and the customers' needs, adds value to facility services, and are efficiently achieved. Serves as a member of the management team and provides advice on ways to improve organizational performance and to meet strategic goals.

• YOU WILL/MAY:
• Ensure that regulated establishments produce a safe product by executing appropriate inspection methods, determining non-compliance with regulatory requirements, documenting noncompliance and initiating enforcement action, where warranted.
• Verify that meat and poultry slaughter and/or processing establishment's Sanitation Standard Operating Procedures (SSOP) and Hazard Analysis and Critical Control Point (HACCP) Plans meet regulatory requirements.
• Execute Sanitation Standard Operating Procedures (SSOP) and Hazard Analysis and Critical Control Point (HACCP) Plans effectively to prevent unsanitary conditions and adulteration of product.
• Review records, observe plant operations and conduct hands-on verification to ensure compliance with regulatory requirements and prepare detailed documentation (Non-Compliance Records) of non-compliance with regulatory requirements.
• Determine when regulatory control action is necessary. You will assess whether the plant's corrective or preventative actions are acceptable and effective, if there are trends in non-compliance, or if enforcement action is warranted.
• Conduct regulatory oversight activities inside plants in matters relating to other consumer protections (e.g., economic adulteration and misbranding).
• Have contact with plant managers, owners and others to explain legal and regulatory requirements, discuss operation of the plant's SSOP, HACCP plan and other food safety programs.
• Communicate and defend determinations on non-compliance issues and discuss plans for addressing non-compliance.
• Work with a variety of individuals to resolve problems, clarify differences of interpretation concerning HACCP and other food safety or consumer protection requirements.
• Advise other Agency inspectors, supervisors and officers on inspection and enforcement matters for which you are involved.
• Conduct various samplings, surveys and tests to obtain pertinent data on potential problem areas, industry trends, or other issues of current interest to the Agency.
• Be involved in performing health and safety verification sampling and tests for detection of specific microbes (e.g., salmonella, listeria, etc.), residues or contaminants.
• Assure that products approved for import are in full compliance with all applicable Federal regulations governing the importation of meat and poultry products.
• Authorize entry of all meat or poultry products considered to comply with Federal regulations or refuse entry of any products which violate any of the requirements for admission into this country.
• Coordinate with other Federal agencies (e.g., the Animal and Plant Health Inspection Service (APHIS) and U.S. Customs and Border Protection (CBP) on such matters as animal health restrictions and refused entry lots.

Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites
• Updates on codes of practice & environmental literature and circulates information to each level of employees

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
  Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

Ready to Shape the Future of Health and Wellness? 

At Vita Green, we are all about creating a healthier, happier world, and we want you to be part of it! 

About Vita Green Group 

Vita Green stands at the forefront of the Health and Wellness supplements industry. Headquartered in Hong Kong, we own a diverse portfolio of well-established brands, including Dr. Choice, Naturo Vita, and Tea Chateau. With over 1 million satisfied consumers, our product portfolio is continually expanding, making an impact in markets worldwide 

With people at the heart of everything we do, we invest significantly in cutting-edge research and development, striving for the highest standards to create a healthier future. 

Position Overview

We are seeking an analytical and detail-oriented Quality Assurance Manager/Supervisor to join our high-performing QA team. If you are eager to advance your career with a company that prioritizes people and efficacy, we encourage you to apply now!

What You'll Do  

• Ensuring that both raw materials and finished products maintain the highest standards of quality.
• Supervising and managing work allocation of the team members to ensure that the resources are well spent.
• Engaging in Quality Management System Implementation.
• Reviewing process of GMP documents, sampling, and testing of various materials. 

Who we’re looking for: 

• A Degree holder in Chemistry, Chinese Medicines, Microbiology, Biochemistry, Pharmacy, Pharmaceutical Studies or Science related disciplines
• Having at least 8 years’ experience in the pharmaceutical or FMCG industry, with at least 3 to 5 years in a managerial role
• Attentive to details, mature, independent, strong analytical and problem-solving skills, work well in a team
• A good team player and willing to learn to develop yourself
• Particularly interested in growing yourself in a stable manufacturing environment
• Good communicator with other teammates
• Candidates with less work experience will be considered as Quality Assurance Supervisor

Why Join Us: 

We value your professional and personal growth – fostering a positive work culture is our priority. Here, you’ll find more than just a job, you’ll discover a genuine opportunity to thrive.  

• Be part of a forward-thinking company dedicated to health and wellness.  
• Engage in pioneering projects that push the boundaries of innovation. 
• Opportunities for professional growth and development. 
• Flexible working schedule that promotes work-life harmony. 
• Causal wear every day! 
• Collaborate with a talented and diverse team. 
• Exclusive employee discounts on our products and much more! 

#LI-AA1