Total 419 Quality Assurance / Control job vacancies in Holloman AFB, New Mexico

Under the general direction of the Principal Inspector or Supervisory Principal Inspector accomplishes the following duties:

A. Technical Administration

On a continuing basis, ensures assigned organizations are properly and adequately organized, staffed and equipped; establishes and conducts adequate training programs; maintains record keeping systems; and facilities and ensures procedures meet all regulatory requirements.

Chairs joint Federal Aviation Administration (FAA) and industry meetings. Maintains regular contact with organizations assigned and coordinates with top management officials. Requires or directs correction of any deficiencies/discrepancies and refuses or withdraws approval if they cannot be resolved.

Responsible for conducting enforcement investigations and preparation of final reports and recommendations on disposition. Performs or supervises the emergency suspension of certificates or cancellation of operations specifications. Conducts or directs the reexamination of certificated airmen or recertification of an operator or agency.

Conducts investigations of public complaints, congressional inquiries, and aircraft incidents and accidents. Provides verbal and/or written technical assistance to legal counsel, testifies at court trials and formal hearings, and gives dispositions.

Coordinates minimum equipment list (MEL) approvals with the principal inspector. Takes enforcement action in instances of noncompliance with the MEL.

Coordinates with geographic inspectors for the accomplishment of non-routine air carrier surveillance.
Assists Principal Inspector in the planning and implementation of certificate holders surveillance via usage of the appropriate safety system.

B. Certification

Approves/accepts or disapproves/rejects manuals and revisions to such manuals. May require amendments to previously approved manuals to accomplish the following: correct any conflict with regulatory requirements; eliminate unsafe practices: and/or improve the specificity of instruction.

Evaluates training programs to ensure that they meet the requirements of 14 CFR. Approves or disapproves these training programs including flight simulators, training devices, or other such equipment used in these programs.

Approves/disapproves designation of check airmen and makes recommendations on the appointment of designees.
Evaluates operations and facilities by on-site inspections and review of reports by geographic inspectors or others. Negotiates changes essential or desirable in their policies and procedures. Determines the appropriate methods and/or plans for securing corrective action and determines through on-site inspection or inspector reports the effectiveness of any action.

Evaluates and approves/disapproves requests to operate under conditions not previously authorized and may prescribe additional conditions and limitations as appropriate.

Approves the original issuance of operations specifications and issues original operating certificates. Approves amendments to operations specifications. Evaluates the safety of proposed changes in route or airport authorizations; prescribes any changes required before approval.

Directs or participates in flight evaluations to determine compliance with 14 CFR. Recommends changes that will be required prior to approval.

Duties and Responsibilities continued below

1. Serve as senior team member in quality assurance staff assistance visits and oversight inspections.
2. Plan, schedule, and facilitate Quality Assurance Staff Assistance Visit (SAV) and Oversight inspection (OJ) events within schedules and priorities set by higher management.
3. Identify systemic issues or processes that require further analysis and improvement.
4. Serve as the team subject matter expert on site visits to other Air Logistics Centers, Product Centers, Test Centers, other government organizations and/or contractor facilities to observe applications of repair, manufacturing, overhaul technologies, administrative and support processes.

As an QUALITY ASSURANCE SPECIALIST, GS-1910-11, you will:

• Determine the proficiency and qualifications of certified personnel.
• Make decisions and recommendations on technical concerns presented by supervisors.
• Ensure that quality considerations are addressed and requirements achieved for all aircraft maintenance work and support functions to ensure end items perform as intended with reliability.
• Serve as the Quality Assurance Specialist for the planning, implementation and execution of a quality assurance program that includes the full range of quality principles, concepts, inspection techniques, surveillance and evaluation.
• Perform other duties as assigned

• YOU WILL/MAY:
• Ensure that regulated establishments produce a safe product by executing appropriate inspection methods, determining non-compliance with regulatory requirements, documenting noncompliance and initiating enforcement action, where warranted.
• Verify that meat and poultry slaughter and/or processing establishment's Sanitation Standard Operating Procedures (SSOP) and Hazard Analysis and Critical Control Point (HACCP) Plans meet regulatory requirements.
• Execute Sanitation Standard Operating Procedures (SSOP) and Hazard Analysis and Critical Control Point (HACCP) Plans effectively to prevent unsanitary conditions and adulteration of product.
• Review records, observe plant operations and conduct hands-on verification to ensure compliance with regulatory requirements and prepare detailed documentation (Non-Compliance Records) of non-compliance with regulatory requirements.
• Determine when regulatory control action is necessary. You will assess whether the plant's corrective or preventative actions are acceptable and effective, if there are trends in non-compliance, or if enforcement action is warranted.
• Conduct regulatory oversight activities inside plants in matters relating to other consumer protections (e.g., economic adulteration and misbranding).
• Have contact with plant managers, owners and others to explain legal and regulatory requirements, discuss operation of the plant's SSOP, HACCP plan and other food safety programs.
• Communicate and defend determinations on non-compliance issues and discuss plans for addressing non-compliance.
• Work with a variety of individuals to resolve problems, clarify differences of interpretation concerning HACCP and other food safety or consumer protection requirements.
• Advise other Agency inspectors, supervisors and officers on inspection and enforcement matters for which you are involved.
• Conduct various samplings, surveys and tests to obtain pertinent data on potential problem areas, industry trends, or other issues of current interest to the Agency.
• Be involved in performing health and safety verification sampling and tests for detection of specific microbes (e.g., salmonella, listeria, etc.), residues or contaminants.
• Assure that products approved for import are in full compliance with all applicable Federal regulations governing the importation of meat and poultry products.
• Authorize entry of all meat or poultry products considered to comply with Federal regulations or refuse entry of any products which violate any of the requirements for admission into this country.
• Coordinate with other Federal agencies (e.g., the Animal and Plant Health Inspection Service (APHIS) and U.S. Customs and Border Protection (CBP) on such matters as animal health restrictions and refused entry lots.

VA offers a comprehensive total rewards package: VA Nurse Total Rewards

The DCQM provides executive leadership and direct supervision over the following areas: Accreditation, Risk Management, External Peer Review, and Patient Safety. Works towards achievement of high quality, safety, and cost effective evidence based outcomes on a continual journey of a high reliability organization. Collaborates with both administrative and clinical services to monitor quality and safety within the service and medical center. Ensures processes are in place for continued accreditation readiness and participates in rounds to survey clinical departments. Functions as facilitator in implementing action plans and process improvement strategies at services and medical center for follow up to include regular progress reports. Reviews quality data for trends and early intervention. Applies clinical performance improvement methods, collects outcome data related to policy, procedure, and regulatory compliance and in collaboration with management, initiates performance improvement monitoring projects. Utilizes data and comparative analytical processes in recommending design and implementation of innovative programs to improve service excellence, customer satisfaction, and compliance to patient care and regulatory standards. Major duties and responsibilities include, but are not limited to:

1. Provides executive input in the strategic planning, budget, mission, operational planning, and policy development for local and network efforts.
2. Utilizes current trends and relevant theories in an analytical framework to design/modify, implement, and measure integrated programs and activities to achieve clinical and administrative goals of the medical center and/or network. Evaluates outcomes against strategic priorities.
3. Demonstrates substantial and continuous responsibility for directing and managing an integrated program.
4. Consultant to medical center staff and greater community in areas of expertise.
5. Demonstrates expert practice that goes beyond the unit to encompass a program, an entire service, or across service lines and improves clinical outcomes.
6. Develops and implements strategies to address care quality problems for patients.
7. Develops/reviews Nursing Service/Medical Center Policies, procedures and standards as appropriate.
8. Demonstrates grade-appropriate, consistent critical thinking skills.

• Lead a team of trades and/or labor workers.
• Perform nonsupervisory munitions surveillance work that is usually of the same kind and level as members of the work crew led.
• Prioritize, assign, and oversee explosive operations and managerial functions across the full spectrum of Munitions activities.
• Administer critically enforced mandated programs within the Missile Maintenance Group designed to uphold safety, security, and accountability of personnel and critical resources.

• Performs duties associated with the administration of the quality assurance provisions of contracts by designing, implementing, and maintaining a risk-based surveillance program and assessment plan.
• Identifies opportunities for process improvements through analysis of process measurement data.
• Serves as a member of a multi-functional or technical team. Responsible for implementing the overall Quality Program for a diversity of products and services in support of U.S. Government acquisition at one or more supplier’s facilities.
• Ensures contractor compliance with all requirements related to the design, manufacturing, repair, overhaul, and modernization of a variety of items for contractor and customer activities throughout the world.
• Independently performs audits/surveillance of contractor’s processes to ensure customer and contractual requirements are met.
• Investigates and provides data on customer complaints/concerns regarding contractor’s quality performance and processes which impact user satisfaction.
• Provides technical support to all other DCMA team members, assisting in the analysis of contract related issues to determine the best course of action to support the contractor and customers.

• Performs Major Command (MAJCOM)-level inspector duties for formal inspections covering a wide array of nuclear and conventional operational mission and mission support tasks.
• Ensures MAJCOM, non-appropriated fund (NAF), and unit-level resource management policy and procedures guidance complies with existing laws, instructions, and regulations pertaining to operational and management (O&M) engineering involving maintenance, repair, upgrade, and operation of electrical circuits, equipment, and infrastructure systems with legal and regulatory requirements and meet customer needs.
• Evaluates unit installations, repair, and maintenance of lightning protection systems, munitions/weapons storage area electrical systems and other large commercial and industrial electrical systems with complex problems and extensive repairs.
• Evaluates work related to construction management, design, and programming/base development functions for compliance with existing laws, instructions, and regulations.
• Assesses unit compliance with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

The purpose of the position is to serve as an inspector of surface maintenance vehicles and equipment to ensure that physical and operating characteristics are within acceptable standards and specifications. Duties involve complex inspection work, requiring a wide variety of inspection processes and techniques, at remote worksites or field installations where a supervisor is not readily available. In these situations, work is performed very independently and decisions require a wide range of subjective judgments.

SUMMARY OF DUTIES: The purpose of this position is to provide trained and qualified Air and Space Operations Center (AOC) Command and Control (C2) warriors to augment MAJCOM deployable AOCs worldwide at the operational level of war. The state mission is to provide support to civil authorities, as directed by the Governor, for disaster relief, public safety, search and rescue, and civil defense, and Continuity of Operations. Must be trained and ready to function in a senior level position in a coalition AOC reporting to the C/JFACC at the 3-star level. Accordingly, must direct all actions that prepare unit members to perform at the operational level of war in an AOC. Responsibility to possess a working knowledge of all Air Force Weapon Systems and their capabilities, as well as a clear understanding of the systems and capabilities of other DOD components, NATO nations, and other coalition partners. This mastery level knowledge is required to sustain the development and execution of a daily Air Tasking Order for a minimum of 30 days at 500 missions per day. Due to the unique mission of the, C-MAJCOM, this PD cannot be used in any other organization.

• Determines squadron goals for long- and short-range planning and execution of all programs.
• Accomplishes, through subordinate supervisors, the mission training program.
• Provides direction and leadership to unit members, including full-time air technicians and AGRs as well as traditional Guardsmen.
• Directs organizational mission capability through a series of extensive Air Force inspections.
• There is frequent contact with senior leadership in, AMC, PACAF, TACC, NGB, and state JFHQ, often to establish policy or to advance unit operational initiatives to include reachback and Distributed Mission Operations (DMO).
• Performs other duties as assigned.

Duties & Responsibilities:

• Oversee and guide the Quality team to ensure effective quality control across the entire warehouse department.
• Collaborate with the Warehouse Manager to review and refine work instructions, ensuring clear and efficient operational procedures.
• Plan and conduct education and training programs to enhance the skills and knowledge of warehouse staff.
• Identify challenges in warehouse operations, analyze root causes, and implement solutions to improve quality and organizational efficiency.
• Develop and implement Kaizen (continuous improvement) strategies to enhance processes within the warehouse department.
• Plan and execute Internal Quality Assurance activities across all warehouses to maintain high-quality standards.
• Support the warehouse department in meeting and exceeding customer quality expectations.
• Manage the tasks and attendance of Quality team members, ensuring efficient and productive operations.
• Foster collaboration with managers and staff across Sankyu and other warehouses to optimize organizational performance.

Requirements:

• Diploma / Degree in Engineering and QMS related field with min 2 years of relevant experience
• Team player, good interpersonal and communication skills, able to work independently
• Good knowledge in ISO related management systems
• Candidate must possess at least Professional Certificate/NiTEC, Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Bioengineering/Biomedical), Engineering (Environmental/Health/Safety), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical), Logistic/Transportation or equivalent.
• Working location: Tuas (**Shuttle service is provided from/to Tuas West Road MRT**)

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

Position overview

We are seeking a highly skilled and motivated Senior Software Engineer to join our planning and control team. As part of this team, you will work on cutting-edge research and development of planning algorithms that enable autonomous systems to navigate complex environments safely and efficiently. This is an exciting opportunity for individuals who are passionate about advancing the field of autonomy and robotics. You will play a key role in the design, development, and optimization of behavior and motion planning systems while collaborating closely with cross-functional teams.

Role responsibilities

• Improve the existing software architecture and design the right software architecture for new components
• Design and develop clean, fast, reliable code
• Implement advanced features for autonomous vehicles
• Uphold code quality continuous integration, automated testing, and code reviews
• Drive software engineering best practices and processes
• Create technical design documents
• Mentor other software engineers

Required experience

• Bachelor's or Master's degree in Computer Science, Robotics, or related fields
• 5+ years experience writing production-quality code in modern C++
• Understanding of behavior planning, decision-making frameworks (e.g., finite state machines, behavior trees), or related AI techniques.
• Experience with Motion Planning algorithms, such as RRT, RRT*, and other graph-search based algorithms
• Experience developing in a Linux environment
• Strong organization and communication skills
• Flexible problem-solver
• Bonus experience
• Experience with ROS or other similar middleware
• Experience with real world safety critical applications
• Experience deploying software tools and/or metrics

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!

Duties & Responsibilities

• Coordinate with Engineering, Construction, Procurement and Project groups to review the scope of work in terms of deliverables to be submitted to the client, to finalize schedules to be met, and utilize resources required as percontract.
• Perform schedule monitoring and updating of project schedule, preparation of periodic Progress Reports with commitments & forecasts. Propose corrective actions and follow-up.
• Prepare various Weekly/Monthly Progress Reports.
• Analyse Subcontractor’s progress report, identify and highlight schedule deviations and delay.

Education Qualifications and other Requirements

• Degree with extensive Project Control experience on major projects working in a contractor environment is preferable.
• Excellence in Microsoft Excel, Microsoft Project and Primavera version 6 (and above) application is a must.
• Minimum 6 to 7 years planning & scheduling in EPC sector is a must.
• Familiar with standard software programs, developing S-Curve Schedule, bar-charts and manpower histogram is a must.

Skill Requirements

• Demonstrated success in past project involvement and technical delivery of medium to large size projects.
• Possesses wide and diversified knowledge of project control system, scheduling and planning techniques in the Oil & Gas and Petrochemical Industry, in particular EPC.
• Quality & Safety Awareness / Accountability.
• Organisational Alignment.
• Technical Skill & Work Performance.
• Teamwork (Cooperation and Coordination).
• Effective Communication.
• Integrity and Trust.

Supervises a staff of Air Traffic Control Specialists that is responsible for carrying out air traffic control assignments within a geographic area.

Plans and assigns work to be accomplished by subordinate employees. Sets work priorities and schedules. Approves leave; gives advice, counsel, and instruction to employees on both work and administrative matters. Evaluates performance of employees and recommends performance ratings. Hears and resolves complaints from employees and refers group grievances and more serious unresolved complaints to a higher-level manager. Identifies and arranges for developmental and other training needs of employees. Finds ways to improve production or increase the quality of the work directed. Adjusts staffing levels and work procedures to accommodate resource decisions made at higher levels. Recommends goals and objectives for the area and tracks accomplishments.

Communicates and reinforces diversity and EEO policies and programs in all areas of responsibility, including selections, training, and transfers. Supports and participates in the labor management partnership process and fosters a work environment where all employees are treated in a fair and equitable manner.

The Operations Supervisor reports to the Operations Manager. Performance is evaluated upon the effectiveness with which assigned program objectives are achieved.

• Collects monthly Performance Indicator data from the various branches and sections. Compiles the data and prepares trend charts. Schedules and facilitates the monthly Quality Assurance meeting and prepares minutes. Identifies and analyzes negative trends,
• Oversees Fraud, Waste and Abuse Program. Focal point for fraud prevention measures.
• Determines the methods to be used in conducting Quality Assurance Reviews.
• Attends and participates in all Comptroller staff meetings, and branch level meetings when requested to do so.