Total 10 Quality Assurance / Control job vacancies in D18 Tampines, Pasir Ris

1. Conduct routine baking tests on samples to ensure flour quality meets standards.
2. Perform additional tests related to competitor analysis, complaints, R&D, and evaluations as assigned.
3. Report quality defects or issues to superiors promptly for resolution.
4. Accurately record and submit test results, maintaining proper documentation.
5. Continuously improve baking skills and adhere to scheduled tests.
6. Assist in product demonstrations, technical training, and sales activities.
7. To keep Customer Service Department (CSD) facilities in good condition and promptly report to superior for any sign of equipment defect or breakdown.
8. Maintain and report the condition of equipment, ensuring facilities are clean and organized.
9. Follow safety, HACCP, FSSC 22000, HALAL, and best practice procedures.
10. Protect the confidentiality of company formulations and quality data.
11. Adhere to company policies and participate in safety and quality improvement activities.
12. Support FSSC 22000 initiatives and complete additional tasks as directed by management.
     

Duties & Responsibilities

• Coordinate with Engineering, Construction, Procurement and Project groups to review the scope of work in terms of deliverables to be submitted to the client, to finalize schedules to be met, and utilize resources required as percontract.
• Perform schedule monitoring and updating of project schedule, preparation of periodic Progress Reports with commitments & forecasts. Propose corrective actions and follow-up.
• Prepare various Weekly/Monthly Progress Reports.
• Analyse Subcontractor’s progress report, identify and highlight schedule deviations and delay.

Education Qualifications and other Requirements

• Degree with extensive Project Control experience on major projects working in a contractor environment is preferable.
• Excellence in Microsoft Excel, Microsoft Project and Primavera version 6 (and above) application is a must.
• Minimum 6 to 7 years planning & scheduling in EPC sector is a must.
• Familiar with standard software programs, developing S-Curve Schedule, bar-charts and manpower histogram is a must.

Skill Requirements

• Demonstrated success in past project involvement and technical delivery of medium to large size projects.
• Possesses wide and diversified knowledge of project control system, scheduling and planning techniques in the Oil & Gas and Petrochemical Industry, in particular EPC.
• Quality & Safety Awareness / Accountability.
• Organisational Alignment.
• Technical Skill & Work Performance.
• Teamwork (Cooperation and Coordination).
• Effective Communication.
• Integrity and Trust.

Job Description:

We are seeking an experienced and detail-oriented Electrical Engineer specializing in the design, configuration, and troubleshooting of electrical control panels. The candidate will be responsible for ensuring all control systems are designed and maintained in compliance with industry standards and project requirements.Should be avaliable 24/7.Should able to work overseas. Should have class 3 Driving Licience 5 years experience in Singapore.

Key Responsibilities:

• Design and Drafting: Develop detailed electrical schematics, wiring diagrams, and layout drawings using AutoCAD or equivalent CAD software. Ensure adherence to applicable codes, standards, and safety regulations (e.g., NEC, IEC).
• Component Selection and Sizing: Calculate and size electrical components such as circuit breakers (CB), relays, contactors, and cables. Specify and integrate control devices like PLCs, VSDs, VFDs, HMI panels, and temperature controllers.
• Control Panel Assembly: Oversee the assembly, wiring, and testing of control panels, ensuring accuracy and quality. Work closely with technicians to provide guidance and address any assembly issues.
• Troubleshooting and Maintenance: Diagnose and resolve electrical and control system issues in a timely manner. Implement corrective actions and preventive maintenance strategies for control systems.
• Programming and Integration: Develop and modify PLC and SCADA programs for control system applications. Ensure seamless integration of control systems with other automation and instrumentation devices.
• Testing and Commissioning: Perform functional testing and validation of control panels and systems. Commission control panels on-site, including configuring and calibrating field devices and instrumentation.
• Project Management: Coordinate with project managers, clients, and other engineering disciplines to ensure project objectives are met. Prepare technical reports, documentation, and user manuals for control systems.

Qualifications:

• Bachelor's degree in Electrical Engineering or a related field.
• Minimum of 7 years of experience in control panel design, assembly, and troubleshooting.
• Proficiency in AutoCAD or equivalent CAD software.
• Strong knowledge of electrical standards and regulations (e.g., NEC, IEC).
• Hands-on experience with PLC and SCADA programming (e.g., Allen-Bradley, Siemens, ABB).
• Excellent problem-solving skills and attention to detail.
• Ability to work independently and as part of a team.
• Strong communication skills, both written and verbal.

Responsibilities:

• Quality inspection on airframe or aircraft engine tools
• Recording deviations in quality notifications in SAP
• Communicate closely with internal stakeholders i.e. Quality Engineer, Supply Chain, Logistics and external vendors for rework, measurement, replacement and performance relating to quality
• Move Tools as when is required based on analysis of records
• Initiate continuous improvement projects to improve work areas & procedures
• Other reasonable duties as assigned by the Management

Requirements:

• Education: Minimum NITEC in Engineering
• Experience: Minimum 2 years relevant experience in an industrial environment, ideally in the quality assurance
• Minimum 2 years relevant experience in metrology and basic knowledge in measuring tools and practices
• Excellent communication & interpersonal skills
• Good mechanical understanding
• Basic knowledge in visual inspection of weld seams

Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites
• Updates on codes of practice & environmental literature and circulates information to each level of employees

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
  Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

You’ll get to:

• As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.
• Work with vendors, government agencies and teams to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
• Analyse and decompose complicated software systems and design a strategy to test these systems.
• Review Quality Assurance Plan and Test Strategy to provide timely and meaningful feedback.
• Ensure all required testing documentations are in place as part of production preparation checks.
• Drive and advocate continuous improvement in testing practices and tools.
• Conduct research on emerging test automation technologies that can optimize and accelerate the project delivery.

What you’ll bring to the team:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
• Minimum 5 years' experience in application exploratory testing and regression test automation, application performance testing, and/or application security testing. Hands-on experience in automating various types of tests such as unit tests, API tests, Integration Tests, UI Tests, and End-to-end Tests.
• Create and support test automation strategies and implementations
• Knowledge of test best practices, test methodologies and their corresponding tools.
• Must have strong troubleshooting and debugging skills
• Meticulous attention to details
• Strong analytical, interpersonal and presentation skills
• Keen to share knowledge with team mates
• Curious, open to new ideas
• Quick to learn new skills
• Proactive, self-driven and motivated

Bonus points for:

• ISTQB, CSQA, CSTP or other relevant certification
• Excellent verbal communication and listening skills
• Experience in agile development environment will be an added advantage
• Experience in DevOps will be an added advantage
• Experience in Performance testing will be an added advantage

About Us

Green Link Digital Bank is Singapore's inaugural wholesale digital bank focusing on supply chain finance, mainly serving MSMEs and aiming to help MSMEs grow and improve digitization.

Responsibilities

• Review and approve onboarding of high-risk customers.
• Provide AML/KYC advisory on name screening, KYC documentation, and onboarding related issues/red flags escalated by front line.
• Obtain approval from the Bank’s senior management to establish or continue business relations with the high risk rated customer.
• Overseeing the carrying out of ongoing monitoring of account relationships.
• Maintain and update local internal blacklist in the AML System, overseeing that the Bank has adequate arrangements to perform AML screening of its customer database.
• Participate in system implementation and UAT, system enhancements, identification of system gaps and evaluation on the system capabilities/functionalities to enhance control effectiveness and efficiency including exploring the use of system automation such as AI, RPA and advance DA models.
• Extend support/help to transaction monitoring & STR team where needs arise.

Requirements

• A recognised University Degree or relevant professional qualifications in financial services or audit.
• 3 - 5 years’ experience in AML compliance within the banking, digital assets and/or relevant fields.
• Familiarity with payments and cryptocurrency AML and sanctions program.
• Familiar with MAS regulations in relation to ML/TF.
• Interest in the digital payment tokens and/or DPT service provider’s space.
• Good interpersonal and communication skills.
• Resilient and takes well to criticism.
• Adaptive, proactive, independent, and resourceful.
• Embodies teamwork.

Maintain standards and quality processes in food manufacturing operations;

• Conduct daily in-process quality control inspections at production lines to ensure alignment with internal requirements and Good Manufacturing Practices
• Maintain integrity, accuracy and completeness of QC data and records
• Perform routine calibration and maintenance of equipment
• Assist in export documentation consolidation and Health Certificate application
• Assist in monitoring and inspecting company infrastructure, equipment and utilities
• Develop and implement quality control procedures and protocols to improve overall product quality and consistency.
• Inspect in-coming and out-going products according to receiving and shipping policy
• Review and validate supplier raw material records and results (COA)
• Process improvements initiatives across the company

Conduct tests for food quality and packaging;

• Sensory evaluation of products aligned with specification
• Perform product sampling for laboratory tests

Rectify non-compliance issues (Customer Complaints / Audit findings);

• Support traceability investigations into lapses in quality, hygiene standards and non-compliance to quality standards. Conduct investigation and follow up with corrective action

Conduct training for production staff on quality control procedures, GMP practices, and food safety protocols;

Job Requirements

• Minimum 1 year of relevant working experience / Diploma in Food Science or related field.
• Knowledge of food safety standards and GMP principle
• Proactive, willing to learn and good follow-up skills
• Able to work independently with minimal supervision

Responsibilities

• Responsible for the quality management of machined products to ensure that product quality
• Ensuring that our internal management systems are well defined and relevant in meeting international standards and customer requirements.
• Lead and monitor the QMS incl. ISO9001 & ISO 14001 quality system certification and promote continuous improvement.
• Lead the quality team to implement quality inspection and control and manage non-conforming products.
• Participate in supplier evaluation and management to ensure the quality of raw materials and purchased parts.

Requirement

• Minimum Bachelor Degree in Mechanical or Industrial Engineering
• At least 3 years of quality management experience in the machining industry
• Proficient in using office software and mintab statistical analysis software, and possessing Six Sigma quality management knowledge and skills, e.g. SPC tools & 8D reports.
• Strong knowledge and experience in leading ISO9001 & ISO 14001 quality system certification.
• Proficiency in English and Chinese, with the ability to communicate effectively with stakeholders in China.