Total 27 Manufacturing / Production job vacancies in Moorestown, New Jersey

The Boiler Plant Operator utilizes manual and automatic controls to operate multiple utility systems on a continuing basis in accordance with State and Federal regulations and will function as a critical and integral part of the safe and efficient operation of the boiler plant and associated energy systems. Duties include but are not limited to:

• Oversee the areas of operations, maintenance, and repairs in a with minimal or no guidance from supervision.
• Maintaining boiler plant operations when transitioning from multiple fuel sources.
• Troubleshooting and adjusting plant and mechanical systems to ensure proper functioning.
• Maintaining repair equipment needed for routine maintenance.
• Reading gauges, meters, verifying steam pressure and recording maintenance data.
• Maintaining fuel tank levels in accordance with plant operating procedures
• Performing routine testing to determine proper pH balance, heavy metals and hazardous chemicals.
• Performing efficient and economical generation of steam producing systems.
• Performing operational repairs of limited to moderate complexity.
• Following instructions as provided by diagrams, drawings and operating manuals.
• Receiving fuel oil from tractor trailers and other suppliers while following all safety regulations
• Making judgments and decisions based on supervisory guidance and protocol.
• Maintaining boiler plant operations when transitioning from multiple fuel sources.
• Work from heights, confined spaces, tight spaces, from ladders and manlifts.

Duties include but are not limited to:
- Responsible for the utilization and maintenance of all automobiles, trucks, buses and special purpose vehicles and equipment owned by or leased to VAWNYHS (Batavia).
- Keep continuously aware of VAWNYHS (Batavia) needs and weather conditions, making available and scheduling vehicles accordingly, and carries out directions, policies and procedures issued by the Engineering Manager.
- Participates with his/her supervisor in the selection, promotion or reassignment of staff and recommends disciplinary actions and incentive awards, plans for improving work performances and training programs.
- Organizes and directs staff in productive daily work schedules, and accomplishes work within established policies of EMS.
- Responsible for ordering and stocking repair parts, supplies, materials, and equipment and participates in preliminary planning of budget for various control points.
- Creates 1358's for all transportation costs.
- Responsible for the maintenance of Medical Center and GSA rental vehicles.
- Responsible for compiling all scheduled vehicles inspection providing upkeep and maintenance services and submitting monthly cost figures to invoice GSA lnteragency Motor Pool, Buffalo, N.Y. for all services and materials provided by VAWNYHS (Batavia).
- Be familiar with spraying and application techniques as well as pesticide use and other controls used in a ground maintenance management.
- Oversee contractors ensuring the safe usage of any materials being used.
- Responsible for the safe and efficient operation of all grounds and snow removal equipment, such as road sweeper, lawn sweeper, salt spreader, flail mower, Bobcats 553, 5528, and 873, power washer, and portable generators.
- Responsible for administering road tests, grading applicants, maintaining records of authorized drivers and conducting a search of the driver's background through the National Driver Request Program.
- Instructs subordinates in the safe and efficient operation of such complex equipment as pay loaders, snowplows, tractors with backhoe, front-end loader and gang-mowers.
- Responsible for all work and documentation to insure the section under his/her direction is in compliance with all regulatory agencies, including but not limited to Joint Commission, GSA, OSHA and all life safety standards.
- Creates and presents reports as required by the department and various regulatory agencies.
- Provides technical expertise and consultative advice to the Assistant Director (Batavia site manager) and the Chief of EMS.
- Comments and makes recommendations as needed to address issues with existing conditions, work assignments, costs, energy savings, and maintenance of items.
- Assigns and dispatches vehicles on a daily basis for all patient, employees and staff trips using up to 25 different vehicles.
- Investigates all accidents and makes out reports sending them to District Counsel.
- Responsible of all repairs and maintenance of all equipment, tools and motorized equipment used by the transportation and EMS section.
- Required to act in the capacity of a Service Manager in assessing mechanical failure on vehicles and equipment.
- Maintains documentation and can account for all services and materials provided by VAWNYHS/Batavia which will be billed to GSA Motor Pool, Buffalo NY.
- Assures that all vehicles and equipment are performing efficiently and that safety items such as tires, brakes, light, etc. are in proper working order.
- Responsible for the upkeep of 48.8 acres of land which consists of 36 acres of lawns to be cut and trimmed, also includes the New York State Nursing
Home.
- Responsible for the removal of debris from all walks, stairs and stairwells, the removal of all trash and debris from VAWNYHS (Batavia) grounds. The removal of ice and snow in all parking lots, walks, and stairs during the winter months is managed by the incumbent.
- Responsible for supervisory oversight which includes environmental sanitation, waste management, and basic pest functions.
- Coordinates logistical support for interior design activities, and for setups and movement for furniture/furnishings.
-Makes daily inspections of areas serviced by Aids to insure adequate coverage and proper work performance, observes quantity and quality of work performed by housekeeping staff and work leaders advising them of conditions that do not meet prescribed standards and regulatory requirements.
-Responsible for the control, use and maintenance of numerous pieces of environmental sanitation equipment such as automatic floor scrubbers, vacuums, buffers, burnishers, and carpet extractors.
- Other duties as assigned.

Work Schedule: Monday - Friday, 6:00 AM to 2:30 PM. May work evenings, weekends and holidays based on agency needs
Position Description Title/PD#: Motor Vehicle Operator Supervisor/PD095110
Relocation/Recruitment Incentives: Not authorized

• Plans and schedules maintenance necessary to meet emergency and regular workload requirements.
• Coordinates vehicle maintenance requirements.
• Maintains the On-Line Vehicle Interactive Management System (OLVIMS). Inputs vehicle repair requirements to OL VIMS.
• Performs file maintenance and parts and file reconciliations.
• Performs veliicle management functions such as preparing slides, charts, briefings and reports.

Responsible to guide and lead the manufacturing of cosmetic and health supplement products complying to Good Manufacturing Procedure. Basic chemistry understanding will be very helpful and any laborartory experience will be a plus.

Responsibilities:
• Prepare of the material and packaging material for the daily production.
• Support production including labelling of the bottles, filling, carry and moving of products.
• Maintain cleanliness of workplace and ensure machines are in good condition.
• Documentation and maintain the data of pre-weight till handover the goods to the warehouse.
• Support internal audit & external audit for ISO
• Sourcing & liaising with suppliers on the quotation and stock availability.
• Assist in coaching and guidance to the new employees.
• Raising orders of the raw material, plan the production schedule based on the inventory stock level.
• Ensure all the production operators, manufacturing process is accordance to SOP.
• Ensure the production is running smoothly.
• Learn and understand the production operation flow to complete the daily output.
• Create, update and maintain SAP system.

Requirements:
• Diploma in Chemical/Chemistry/Engineering/Pharmaceutical Sciences
• At least 2 years manufacturing work experience is preferred
• Excellent communication to provide training and coaching to team member
• Knowledge in ISO 22716, ISO 22000 and ISO 13485 knowledge will be advantageous

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Assist Producer/Director in production processes for drama, other programme genres and digital content as assigned, from pre-production to post-production.
• Manage production schedules.
• Assist in scouting, managing and contacting talents required for production.
• Conduct location checks and suggest suitable locations for filming and recording.
• Assist Producer/ Director during filming or studio recordings.
• Book and coordinate production facilities.
• Fulfill administrative production processes.

• At least A' Levels or Diploma in Media Studies
• Ability to communicate effectively with all levels of staff and public.
• Ability to work independently.
• Effectively bilingual in English and Malay for business purpose.
• Strong interest in television and media.
• Ability to manage talents and performers.

DC Environment Support

• Shall monitor the facilities infrastructure in the DC to ensure that they are within the operating levels defined by the Customers.
• Power infrastructure (such as Uninterrupted Power Supply and power distribution boards);
• Cooling Infrastructure (such as computer room air-conditioning units);
• Fire detection and suppression systems (such as FM200, water sprinklers, fire extinguishers);
• Environment monitoring system (such as humidity and temperature); and
• Water leakage detection.
• Shall ensure the DC infrastructure is monitored on twenty-four (24) hours a day, seven (7) days a week, inclusive of Saturdays, Sundays and Public Holidays.
• The Vendor shall inform the Customer within one (1) hour when problems are detected.
• Shall work with the Customer and Customer-appointed Supplier to resolve any infrastructure issues detected in accordance to the support hours as required by the Customer.

DC Facilities Management Services

• Shall ensure, through daily inspection, that the general cleanliness and tidiness of the data centre are maintained by the Customer-appointed Supplier.
• Shall work with Customer-appointed Supplier on site preparation tasks such as network cabling and electrical wiring, when required.
• Shall ensure the network cabling in the data centre and within the racks are neat and tidy.
• Shall work with the Customer-appointed Supplier for both scheduled and ad-hoc maintenance, servicing, repair and upgrading works to the infrastructure at the Customer’s premises and premises identified by the Customer.
• Shall plan and coordinate the maintenance activities. This includes polling the affected parties, obtaining the Customer’s approval, and sending out messages to inform the affected party.
• Shall obtain the Customer’s approval before finalizing the plan for any activity.
• Shall provide on-site support during the maintenance activities unless otherwise agreed by the Customer.
• Shall maintain up-to-date documentation of the data centre design layouts.
• Shall manage the physical security of the data centre in accordance with the guidelines provided by the Customer.
• Shall monitor the following physical security infrastructure to ensure they are within the operating levels defined by the Customer

Requirements:

• Preferably Three (3) years of working experience in Data Centre Engineer Operations experience
• ITIL v4 Foundation Certification or equivalent

As a Production Controller (Scheduling), GS-1152-09, you will perform preliminary planning and long term forecasting of utilization of aerospace vehicles, engines, and associated support equipment.

Duties include but not limited to:

• Assists higher graded shop personnel in Boiler Plant operations.
• Under the direct supervision of a Maintenance Mechanic (Boiler Plant) Journeyman.
• Assists with preventative maintenance (PM), and the maintenance and repair of boilers and associated steam production equipment.
• Moves and holds heavy or awkward items and attachments; carries, lifts, and holds materials in place during operations; operates power saws, grinders, pipe threaders, drills, cutting torches, etc., for the repair or installation of equipment as instructed by a journeyman.
• Assures safety requirements and housekeeping rules are followed and that personal protective equipment are properly used.
• Performs proper safety procedures prior to working on any type of HVAC/R equipment, fan motors, fans, pumps, etc.
• Lubricates and cleans shop equipment utilizing standard procedures, tools, and cleaning and lubricating agents. - Keeps shop tools properly stored, sweeps and cleans work area, and keeps work area clean and orderly.
• Performs other related duties and functions as assigned.

Job Descriptions

• Provide operational support to the Section Leader in Mixing Section/ Oven & Stacking Section / Slicing Section
• Operate the mixing/ depanner & oven unloader/ slicer
• Ensure proper cleaning is done
• Adhere the disposition of all non-conforming products as instructed by superiors
• Adhere to all working and safety regulations

Requirements

• Primary education applicants are welcome to apply
• 6 days work week
• Fixed Shift (9am to 9pm / 9pm to 9am)
• Able to work overtime as and when required
• Able to work on weekends and public holidays

Job Highlights

* Provide Uniforms
* Free Meals Provided
* Free Bread Daily
* 13th Month Bonus

* Variable Bonus

* Annual Increment of basic salary (based on individual's work performance)
* Medical & Dental Benefit
* Insurance Coverage

Job Scope:

a. Perform soldering of PCBA with microscope;

b. Assist in SMT basic setup (OJT to be provided) e.g., Kitting Process, Tape and Reel Feeder loading, In-Process Checks; and

c. Cleanroom working environment, with donning of ESD apparels such as smock, shoes, hairnet, mask.

Requirements:

a. Basic manual soldering experience, with understanding of electronic and PCB Board, soldering processes;

b. Education level N level and above; and

c. Able to converse and understand assembly instructions written in English.

Training:

a. Training will be provided for successful candidates to perform his/her job scope.

* Soldering of through-hole and surface mount soldering

* Rework method

* SMT preparation

The working hours are as follows:

Mondays to Thursdays: 8.30am to 6.00pm

Fridays: 8.30am to 5.30pm

Meal Breaks: 1 hour

The basic monthly salary will commensurate with the shortlisted candidate’s work experience, negotiable.

This position is located at an Air National Guard (ANG) Airlift Wing, Maintenance Group, Maintenance Operations Flight, and serves as a consultant to the Maintenance Group Commander / Director of Maintenance.

• Develops, interprets, and provides program guidance to the Wing regarding maintenance policies, procedures, budget, training criteria, and manpower/personnel. Interprets command aircraft assignment configuration and reporting policy and informs appropriate Wing personnel of requirements and provides sufficient follow-up to ensure compliance. Creates functional checklists, guides, and other evaluation tools for use in determining the proficiency of maintenance operations personnel in accomplishing related maintenance tasks. Develops, recommends, and reviews new or supplemental draft maintenance procedures and instructions applicable to aircraft maintenance missions. Manages the maintenance training program and implements policies to ensure maintenance personnel are properly trained to fulfill mission requirements. Evaluates the overall structure of maintenance organizations, identifying program deficiencies and areas for improvement. Prepares and presents summaries/briefings on maintenance manpower levels and any impact on readiness. Provides recommendations to accommodate shortfalls. Reviews and coordinates maintenance personnel and position change requests.
• Provides oversight to the budget process, including planning, programming, budgeting, allocation, and funds execution. Develops recommendations for budgetary actions for specific functions while also evaluating trends and operating costs used to project future commitments and obligations.
• Leads aircraft maintenance support for operational, exercise, or contingency operations. Interprets operational, exercise, and contingency requirements and implements actions to assist Wing execution. Reviews assigned plans to extract command taskings and assess maintenance capability in assigned areas to support plans. Conducts final review of Unit Type Code (UTC) tasking updates prior to formal submission. Validates work products related to deployment/redeployment processes to ensures a smooth and orderly flow of deployment personnel.
• Evaluates leads and controls the Group and subordinate unit training program to ensure combat readiness for unit members and tracks progress via automated training records system and other tools. Coordinates actions with UTMs, supervisors, and higher headquarters training functions at the Wing, NAF, and MAJCOM level, as appropriate. Advises the Group Commander on the execution of unit training and advises UTMs, supervisors or managers within units when actions may affect productivity or mission.
• Directs aircraft maintenance analysis activities for the Maintenance Group. Reviews and interprets aircraft maintenance analysis information to implement programs that positively affect the future health of the aircraft fleet. Ensures aircraft status is properly reported per technical guidance. Oversees unit-level management of aircraft Maintenance Information Systems (MIS) to document and track weapon system maintenance. Compares aircraft maintenance analysis information to National Guard and Major Command standards and identifies trends that could adversely impact unit readiness.
• Represents the Maintenance Operations branch, participating in discussions, meetings, and/or serving on panels or committees concerning maintenance policies and procedures. Establishes, develops, and maintains effective working relationships within the wing, local organizations, other units, NGB and Major Commands. Confirms engine health management duties are performed accurately and data is reported to the Engine Manager for all engines in a timely manner.
• Plans and schedules work in a manner that promotes a smooth flow and even distribution. Coordinates plans and schedules with other organization managers and customers as appropriate. Identifies need for changes in priorities and takes action to implement such changes. Plans work to be accomplished by subordinates, sets and adjusts short-term priorities, and prepares schedules. Assigns work to subordinate employees based on organization priorities and consideration of difficulty and requirements of assignments such that the experience, training, and abilities of staff are effectively utilized to meet organization and customer needs. Balances workload and provides advice, guidance, and direction on a wide range of policy, investigative, inspection/exercise, strategic planning, and administrative issues.
• Performs other duties as assigned.

About the Role

Base location: Dorset, Hampshire, Wiltshire

Salary: £28,072 to £32,605 plus overtime

Working Pattern: Permanent | Full Time, 37 hours | Flexible First options available

What is the Role?

You'll be working as part of a team carrying out, maintenance and construction works on our overhead electricity network, installing poles and pole mounted equipment. This is a physically demanding role which will involve you working outdoors and on public highways, farms and wilderness areas, where you'll also hold responsibility for operating a HIAB and a Unimog mounted crane.

What do I need?

- To be successful in this role you'll preferably have experience operating a lorry mounted loader (HIAB), have Slinger / Signaller experience.

- A HGV class 2 license is required for this role.

- Safety is our number one priority and you must be confident to act on your own initiative and as part of a team, completing on site risk assessments and lifting plans.

- Finally, flexibility will be required for this role, as you may be required to form part of a call out rota to attend to emergencies outside of normal working hours as required.

About our Business

SSEN Distribution powers 3.8 million homes and businesses in communities across central southern England and the north of Scotland. Our team of more than 3,500 people keep customers connected to a safe and reliable supply of electricity whilst developing the flexible networks that are vital to achieving net zero. By enabling a smarter, more resilient electricity network we're ensuring our local communities continue to receive the power they need, both now and in the future. We are consistently investing and innovating to improve network resilience and future-proof power supplies for life's changing demands, from rolling out large scale EV charging schemes to supporting small community generation projects.

What's in it for you?

An excellent package with 34 days holiday entitlement, enhanced maternity/paternity leave, discounted healthcare and much more, view our full benefits package on our careers site.

As an equal opportunity employer we encourage diversity and are committed to creating an inclusive environment for all employees. We actively encourage applicants from all protected characteristics and commit to providing any reasonable adjustments required during the application, assessment and upon joining SSE. Search for 'Inclusion & Diversity at SSE' to find out more.

Next Steps

All applications should be submitted online, and I'll be back in touch after the vacancy closing date to let you know the outcome.

If you would like to discuss any working differently requirements or adjustments you may require throughout the recruitment and selection process, please contact Louise on 01738 351698.

Before commencing employment with SSE, you'll be required to fully complete our pre-employment screening process consisting of a basic criminal records and credit check.