Total 155 Manufacturing / Production job vacancies in D17 Loyang, Changi

Responsibilities:

> Lead and supervise a group of operators/leaders to ensure

smooth operation

> Achieve daily production schedule with minimum yield loss

> Initiate manpower deployment if there is need to reshuffle.

> Enforce discipline and safety on the shop floor

> Prioritization of models’ base on the urgent needs’ basis

> Promote Safety awareness

Requirements:

1. Diploma in Engineering with minimum 2years’ supervisory

experience in manufacturing environment

2. Good interpersonal, team-building and supervisory skill

3. Good communication, and report-writing skill

4. Proactive and process good problem-solving skill

Job Summary:

1) Overall line management by shift.

2) Handle daily productivity.

3) Material resources planning.

4) Handle material incoming and outgoing during VAS-TO.

5) Report and send mail to customer when get incoming issue.

6) Put lot on Hold lot summary.

7) Handle E-mail report sending and data entry.

8) Management the outgoing packing process.

9) Overall line quality checking by shift.

10) Report IQC/OQC issue if material problem.

11) Prepare Handler machine if not enough capacity.

12) Monitor production line include Floor Supervisor, production and backend line issue, lot issue and floor issue.

13) Monitor the line performance and maintain the output.

14) Line feeding according to the level of materials during testing.

15) Follow customer disposition at Hold lot and Low Yield summary. Pick Lots to release, retest reject, retest SET test, ICOS scan, 100% OQA, 100% inspection when customer give disposition.

16) Communicate with VAS Manager.

17) Line housekeeping (5S).

Job Summary:

1) Before testing the lots, operator request technician / Sr. Operator (Test) to countercheck the diagnostic to run the program.

2) Brings the Pass chip trays to the work bench for quantity check on each tray.

3) Collect the finished products separate the good chips and reject chips.

4) Complete the Error Code Collection Form at Low Yield.

5) Complete the Outgoing Inspection Checklist.

6) Count the materials QTY.

7) Double check inputted information.

8) Enter information on the corresponding fields using barcode scanner.

9) Inspect the outgoing materials for production.

10) Label the Reject/VISL chips and write down the number of bad chips.

11) Materials pack out. (Materials Strap, vacuum seal and stick a product label)

12) Materials Strap, vacuum seal and stick a product label when necessary.

13) Prepare and fill in the traveller.

14) Prepare and print out label.

15) Prepare the chips for OOBA.

16) Put tray and material on Handler.

17) Test operator clips a GREEN clip on each tray of passed chips and a RED clip on each tray of reject chips.

18) Verify the traveller information with the materials.

Job Requirements:

- 8 hours shift work (rotating day/night shift)

- Willing to work in cleanroom environment

- Basic English language skills (Able to read and write)

- Has manufacturing/fab experience

- 1 to 2 years of related working experience in the semiconductor industry is preferred.

Roles and Responsibilities

• Lead and develop repair processes for Component Repair New Product Introduction (NPI) independently.
• Generate manufacturing routers and instructions, Repair Source Substantiation packages, and other documentation required for industrialization and approval.
• Lead resolution of technical and operational challenges or concerns raised, and ensure follow through till approval is obtained, and repair is handed over to shop operations.
• Work closely with the Repair Development and Delivery team in Singapore, USA & other global sites, during the NPI repair development phase & industrialization.
• Manage multiple NPI projects by providing scheduling, resource management, budget control and EHS compliance.
• Lead and effectively interface with Operations, Quality, Engineering, and other support teams during NPI repair industrialization into the Shop and ensure that it meets Safety, Quality, Delivery and Productivity objectives, within schedule and budget.
• Interface with vendors and internal functions in an effective manner to ensure that the action items to be carried out for the NPI are executed on time and on budget.
• Assure that all engineering designs and technical data are completed and accurately documented to provide an accurate technical/historical base for future reference and to meet customer / end user requirements.
• Lead and participate in Lean initiatives, including continuous improvement of processes, and utilize Six Sigma tools for NPI process improvements.
• Implement new technology and/or process improvements to increase productivity of new repair processes.

Required Qualifications

• Bachelor’s degree from an accredited university in Mechanical / Aeronautical / Material or other relevant Engineering discipline with 7 years of NPI experiences.

Desired Characteristics

• Demonstrated knowledge and experience in manufacturing/repair processes and development/industrialization of aircraft engine component repairs.
• Good understanding of manufacturing and inspection tools and processes used in the repair industry, such as heat treat, thermal spray, peening, welding, brazing, machining, etc.
• Good knowledge of blueprints, application of engine manuals and technical substantiation process.
• Knowledge of GD&T, tool/fixture design and applications in repair.
• Good time management and strong organizational skills, with ability to multi-task to meet deadlines and customer needs.
• Knowledge of Lean principles, tools and methodology.
• Humble: respectful, receptive, agile, eager to learn.
• Transparent: shares critical information, speaks with candor, contributes constructively.
• Focused: quick learner, strategically prioritizes work, committed.
• Leadership ability: strong communicator, decision-maker, collaborative.
• Problem solver: analytical-minded, challenges existing processes, critical thinker.

About The Job

To optimize the resources and materials planning of the production by coordinating with other departments related to production to achieve uninterrupted production flow to meet monthly and quarterly operations and shipment targets towards customer satisfaction.

To coordinate the supply of raw materials required for production to avoid any disruption to the production schedule and ensure the customers’ orders are duly met on delivery commitments.

Job Objective/s

To optimize the resources planning of the production by coordinating with other departments related to production to achieve uninterrupted production flow to meet monthly and quarterly operations and shipment targets towards customer satisfaction.

To coordinate the supply of raw materials required for production to avoid any disruption to the production schedule and ensure the customers’ orders are duly met on delivery commitments.

Duties and Responsibilities

• Generating Master Production Schedules and Manufacturing Orders, forecasting inventory requirements, optimizing inventory levels as well as helping the organization to evaluate and implement an inventory management system
• Review sales forecasts, customer demands and schedule production activities based on inventory levels and production lead times
• Work closely with Marketing, Operations and Finance Teams to plan and monitor inventory levels
• Schedule Production Planning Meetings and track production performance to schedule.
• Coordinate production material requirements with Merchandising / Operations teams to assure adequate inventory of raw materials and packaging components
• Analyze capacity and resource requirements and coordinate necessary adjustments
• Responsible for accurate raw materials, WIP and finished goods inventory levels
• Responsible for preparation of reports for the end of month (inventory, raw materials, and scrap)
• Supervise receiving of incoming inventory including raw materials, WIP, packaging components, etc.
• Supervise final packing, and ensure shipment and inventory transaction accuracy. Arrange shipment to customer and other outbound shipment.
• All other reasonable duties, as assigned.

Minimum Education

Diploma or Bachelor’s Degree

Minimum Experience

Minimum 2 years of experience in Production Planning in wafer fabrication and with experience in electronics manufacturing

Specific Knowledge / Skills

Possesses good communication skills and the ability to coordinate cross-functionally with R&D, Engineering, Quality and Operations.

Job Summary:

1) Check hardware, socket and handler device setup at start of shift.

2) Troubleshooting for the Handler when alarm occurs. (Site jam, device missing, machine overheat, machine timeout, double tray…etc).

3) Check handler door and write down record per shift; report to the Operation Technician Leader / Technician Leader to follow-up the problematic handler doors.

4) Monitor the handler performance for highest output.

5) Change the hardware with preventive maintenance team when necessary.

6) Set-up. (Alignment, maintains down sites, change Device setup, adjust offset…)

7) Check the traveller data is correct (step by step).

8) Verify quantity of the lot with the traveller.

9) Verify the traveller information with the materials.

10) Collect the finished products separate the good chips and reject chips.

11) Label the Reject/VISL chips and write down the number of bad chips.

12) Materials Strap, vacuum seal and stick a product label when necessary.

13) Follow Operation Technician Leader work instruction.

14) House keeping at end of shift.

15) Training new operation technician.

16) Any tasks as assigned by supervisor or manager.

Job Requirements:

- 8 hours shift work (rotating day/night shift)
- Willing to work in cleanroom environment
- Basic English language skills (Able to read and write)
- Has manufacturing/fab experience
- 1 to 2 years of related working experience in the semiconductor industry is preferred.

The Manufacturing Engineer – NPI is responsible for the timely development and industrialization of Component Repair New Product Introduction (NPI) projects, working with relevant functional teams, and ensuring safety, quality, delivery and cost objectives are met.

Roles and Responsibilities

• Lead and develop repair processes for Component Repair New Product Introduction (NPI)
• Generate manufacturing routers and instructions, Repair Source Substantiation packages, and other documentation required for industrialization and approval.
• Lead resolution of technical and operational challenges or concerns raised, and ensure follow through till approval is obtained and repair is handed over to shop operations.
• Work closely with the Repair Development and Delivery team in Singapore, USA & other global sites, during the NPI repair development phase & industrialization.
• Manage multiple NPI projects by providing scheduling, resource management, budget control and EHS compliance.
• Lead and effectively interface with Operations, Quality, Engineering, and other support teams during NPI repair industrialization in the Shop, and ensure that it meets Safety, Quality, Delivery, and Productivity objectives, within schedule and budget.
• Interface with vendors and internal functions in an effective manner to ensure that the action items to be carried out for the NPI are executed on time and on budget.
• Assure that all engineering designs and technical data are completed and accurately documented to provide an accurate technical/historical base for future reference and to meet customer / end user requirements.
• Participate in Lean initiatives, including continuous improvement of processes, and utilize Six Sigma tools for NPI process improvements.
• Implement new technology and/or process improvements to increase productivity of new repair processes.

Required Qualifications

• Bachelor’s degree from an accredited university in Mechanical / Aeronautical / Material or other relevant Engineering discipline with 4 years of relevant experience.

Desired Characteristics

• Good understanding of manufacturing and inspection tools and processes used in the repair industry – heat treat, thermal spray, peening, welding, machining, etc.
• Working knowledge of blueprints, application of engine manuals and technical substantiation process will be an advantage.
• Good time management and strong organizational skills, with ability to multi-task to meet deadlines and customer needs.
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker.

The Manufacturing Engineer is responsible for product, process and equipment development and ensuring that existing processes and equipment meet quality requirements and operational objectives at GE Aviation, Engine Services - Singapore. This role requires deep level of relevant experience and expertise within the same manufacturing/production field

Essential Responsibilities:

• Own all technical issues relating to the product/process, eg. product and process yield rates, etc.
• Perform process trials, analyse data and produce write-ups on the trials.
• Prepare technical specifications for the purchase and upgrading of relevant equipment.
• Implement New Product Introduction (NPI)s, new coating and welding processes into production.
• Generate Work Instructions and Operating Procedures.
• Ensure that all relevant processes comply with quality requirements, conduct investigations and implement corrective actions as required.
• Collaborate with relevant stakeholders to improve equipment utilization and labour efficiency and reduce operating costs through Lean initiatives.
• Conduct Risk Assessments and ensure that relevant processes are operated in compliance with Environmental, Health and Safety Regulations and Policies.
• Conduct training and certification for relevant technicians.
• Familiar with using lean concept to drive continuous improvement and productivity in the processes.
• Familiar with Lean concepts

Qualifications/Requirements:

• Degree in either Mechanical or Aerospace Engineering from a local or internationally recognised university.
• At least 5 years experience in a Manufacturing Environment is preferred.
• Candidate with previous experience within Aerospace industry is preferred.
• Candidate with a background in manufacturing or production would be considered.

Desired Characteristics:

• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker

Job description

• Attend to daily production technical issues related to processes as to ensure smooth production flow
• Lead co-ordinate and execute continuous improvement in the workshop
• Attend to all quality issues and work with Quality Assurance department to resolve / contain problem using Plant Lean methodology (QRQC)
• Work closely with the Engineering and R&D departments to transit new processes/ technology and transfer into production line on time
• Embarks on productivity, quality & cost reduction program
• Drive towards company KPI (Key Performance Index) and internal PPM target
• Able to solve problems systematically through the different methodology (PDCA -TPM, QRQC, SMED & Six Sigma)
• Familiar with process improvement tools including FMEA,SPC, etc

Job requirements

• Bachelor Degree in Chemical Engineering or equivalent
• Good communication skills. Able to communicate effectively with different levels and functions
• Strong planning and organizational skills
• Assertive, result-oriented with good leadership skills

We are a signage production company that design & manufacture signage. We are seeking to hire a workshop Production coordinator in Loyang.

Job responsiblities:

1.To work out and order raw materials for production use with supervisor.

2. To achieve weekly target of items plan to complete for the week.

3. To monitor production progress closely & prompt for next step to minimize delay.

4. To assist in QC Check with supervisor to ensure signs are of acceptable level to release for installation.

Job requirements

1. Applicants with signage experience or sheet metal works experience advantage.

2. Ability to adapt and fit in a multi culture organisation.

3. willing to work in workshop environment.

Please WhatsApp your CV to 90097956 to apply.

Lead & support the Manufacturing Engineering activity in Engine Overhaul/Component Repair Production Area. Act as Technical Authority, owner of the Engineering Standards in SAESL Operating System and ensure deployment of the initial and continuing process capability standard of the methods to the cell including the resolution of the technical issues/problems/arisings to meet operation cell requirements of safety, cost delivery rate and leadtime (SQCD).

Responsibilities

• HSE – Responsible for ensuring that all processes and methods deployed within the cell/area of accountability are in full compliance to Health, Safety & Environmental Standards and meet the expectations of the Zero Harm Programme.
• Product Safety – Responsible for ensuring that product safety risks are understood and mitigated to meet the required safety levels and reduce the safety risks so far as is reasonably practicable. Support requirements of the Company’s Safety Management System, and for promoting a product safety culture in the organization.
• Safety & Quality – To promote a Behavioral Based Safety Culture. Together with Operation advocate ‘Speak Up’ and embed the elements of Narrate & Demonstrate in the areas of responsibilities.
• Quality – Promote a culture of zero defects ensuring that manufacturing processes and methods within the business are developed and deployed to support Right First Time methodology.
• Coach the team in the use of SAESL Operating Sytem, DMAIC and Sytem Engineerin Tools. Ensure compliance to all relevant company, legislative and technical policies, and standards.
• Cost – To provide leadership to Manufacturing Engineers to support operation cells to drive productivity and optimize OPEX costs.
• Standards – define, maintain and enhance to SAESL Operating System Standards. Provide Tools for ME to imrplement the Standards, working with the cell/area of accountability and Process Owners, and where applicable with the suppliers, drive manufacturing processes towards identified consistent best practice.
• Identify, synthesise and locally govern the requirements for improvements and innovations in manufacturing processes and methods of manufacture within their area of accountability.
• Lead – Act as Technical Authority specifying Manufacturing Engineering, process requirements, methods and make technical decisions in relation to the area of accountability including FAIR/MSA activities and Source & method change.
• Lead – To provide leadership to drive accountability and enablement through engagement and coaching team members, so that everyone can be at their best.
• People – Develop talent to meet the required competencies for the Manufacturing Engineers. Continuously seek to expand knowledge and experience to increase effectiveness in understanding existing and new activities.
• Capability & Technology – Lead the technical input and integrate Manufacturing Technology, Digital Manufacturing and Product Introduction activities to support growth, capability and capacity to achieve operational planned objectives.
• Deploy capability (including NPI) – Buy –off the production readiness of new manufacturing capabilities and assemblies.
• Develop numerate, real time methods for capturing process capability, and ensure it is available and acted on within the facility/supply chain.
• Maintain and/or govern Production Technical Packages (technical instructions, programmes, tooling, etc) for all parts/assemblies which clearly define the manufacturing process.
• Ensure manufacturing processes and/or methods of manufacture within the business and suppliers are capable of meeting and continuing to meet the requirements for quality, cost, delivery rate and time.
• Co-ordinate the technical support to operations and suppliers such that problems and arising are resolved in a structured and timely manner.

Job Description:

· Lead R&D Projects: Drive the design, development, and innovation of interventional medical devices, ensuring projects are completed on time, within scope, and budget.

· Product Development: Oversee the product development lifecycle including feasibility studies, prototyping, preclinical and clinical validation, design for manufacturability (DFM), and regulatory approvals.

· Technical Leadership: Provide technical direction, mentoring, and leadership to a multidisciplinary team of professionals and engineers.

· Collaboration: Work closely with cross-functional teams (clinical, regulatory, manufacturing, marketing, and quality) to ensure seamless product development and alignment with business goals.

· Regulatory Compliance: Ensure that products comply with relevant regulatory standards (e.g. FDA, CE Mark, ISO 13485) and manage interactions with regulatory bodies.

· Innovation and Strategy: Identify emerging trends and technologies in the interventional medical device field, incorporating them into product development strategies.

· Vendor and Partner Management: Collaborate with external partners, suppliers, and contract manufacturers to achieve product development goals.

· Budget and Resource Management: Manage the R&D budget, resource allocation, and project prioritization to optimize development efficiency and output.

· Risk Management: Identify and mitigate technical and project risks throughout the development process.

Requirements:

· Bachelor Degree in Biomedical Engineering, Mechanical Engineering, or related field. Master’s or Ph.D. preferred.

· Minimum of 10 years of experience in R&D within the medical device industry, with at least 5 years focused on interventional medical devices (e.g. catheters, stents, Sheaths, etc.).

· Proven track record of leading product development from concept to market launch.

· Strong knowledge of regulatory requirements and quality systems for medical devices (e.g., FDA, CE Marking, ISO 13485).

· Experience managing R&D teams, including engineers, scientists, and technical staff.

· Excellent leadership, communication, and organizational skills.

· Strong problem-solving abilities and a high level of technical competence in medical device engineering.

· Ability to manage multiple projects simultaneously, balancing technical challenges and business priorities.

· Familiarity with Design Control, Risk Management, and Human Factors Engineering processes.

Job Description

• Develop, implement and maintain advanced methods, operation sequences, and process for the fabrication of gas distribution system components.
• Collaborate closely with cross-functional engineering teams to ensure the successful release of product improvements and new system designs.
• Lead the launch, approval, implementation, and documentation of engineering change requests to support design engineering and production operations.
• Estimate manufacturing costs, define time standards, and provide tooling and process recommendations to optimize efficiency and quality.
• Continuously identify opportunities to reduce manufacturing costs while improving product quality through rigorous analysis and problem-solving.
• Collaborate with test engineering to design and develop test fixtures, and assist in coordinating test fixture sourcing activities.
• Collect operational and test data, evaluate results, and take corrective and continuous improvement actions to optimize system performance.
• Evaluate work methods, procedures, and policies, actively contributing to the development and maintenance of streamlined business processes.
• Conduct root cause analysis and provide comprehensive failure analysis reports for issues encountered during assembly and testing of systems, with a focus on New Product Development projects.
• Perform Process Failure Mode, Effects, and Criticality Analysis, ensuring robust quality processes are in place.

Job Requirements

• Diploma/Degree in Mechanical/Manufacturing Engineering.
• Proficiency in CAD software, such as Solidworks and Autocad.
• Strong knowledge of mechanical design principles and analysis.
• In-depth understanding of materials, manufacturing processes, and quality control in semiconductor equipment manufacturing.
• Meticulous attention to detail and a strong commitment to delivering high-quality work.
• Ability to work collaboratively in a team environment while also being self-driven and able to work independently.
• Outstanding communication and interpersonal skills, enabling effective collaboration with colleagues and stakeholders.
• Familiarity with industry standards and regulations specific to semiconductor equipment manufacturing.

We manufacture signage & traffic safety products for various industries. We are seeking to hire in-house production assistant.

Job Responsiblities

1.Assist planning of factory works and schedule.

2.To follow up / monitor closely with various department process to minimize production delay.

3.Assist to raise purchase request for odering material thru purchaser.

4.To check items completed in workshop and prompt for installation.

5.Ensure housekeeping and cleaniless with supervisor in factory.

Job Requirements

1.Able to use Ms office software and emails.

2.Able to work in workshop factory environment.

3.Basic graphics design, engineering background is advantage.

This position is open for immediate vancany. Interested applicants are to email or whatsapp Resume to 90097956.

Job Description

· Lead, coach and develop the precision engineering team to build a high performing and motivated team.

· Provide technical guidance and support in the design and development of medical device system and precision components.

· Develop initiatives to enhance productivity, quality/yield improvements and cost reduction.

· Continuously evaluate and improve engineering processes and workflows.

· Implement best practices, advanced manufacturing techniques and methodologies. Stay updated with the latest technologies and industry trends.

· Overseas machining projects, process and tool selection.

· Lead in equipment qualification and process validationand engineering change.

· Work closely with NPI, Quality, Supply Chain on RFQ, First Article approval and part qualification. Liaise with customer on new part development activities.

· Implement and maintain good quality processes.

· Ensure compliance with medical device industry standards and regulations.

· Coordinate with other departments to align project goals and requirements.

· Manage resources and prioritizing tasks to meet project deadlines.

· Communicate effectively with stakeholders, including board members, clients, and team members.

· Develop and manage the department's budget.

· Encourage a culture of continuous improvement and innovation

· Perform other tasks as assigned by the supervisor

Requirements:

· Bachelor’s degree in mechanical engineering or equivalent.

· Minimum 10 years’ of relevant Precision Engineering working experience.

· Good knowledge in milling tooling and machining process.

· Experienced in medical device industry is preferred.

· Strong knowledge of precision machining, metrology, and CAD/CAM software

· Familiarity with Geometric Dimensioning and Tolerancing and other precision engineering standard

· Leadership skill.

· Project Management skills.

· Listening and Communication skills.

· Problem-solving and Decision-making skills.

· People Management/Development skills.