Total 77 Manufacturing / Production job vacancies in Bristol, South West, BS7

Duties Include:

• Work off station for long period of time, occasionally at great distances from the Facility.
• Evaluate unusual situations as they arise and make appropriate decisions to ensure the safety of patients.
• Work with minimal supervision and consults with the Supervisor when situations warrant.
• Serves as a patient transportation driver. Demonstrate proficiency in all areas of the transportation service. Complete all required training.
• Drives the following: Shuttle buses Vehicle type: 16 to 32 passenger buses (GVW-14,050 lbs.), 32 passenger bus (GVW-36,350 lbs.), 44 passenger bus (GVW-36,200 lbs.). All other vehicle driven; patient transport Handy-Capped high-top vans (6,900 lbs.), Compact sedans, (GVW-3,936 lbs.) Mini Vans, (GVW-5,400 lbs.), Large passenger vans, (GVW-9, 100lbs.).
• Abide by all City, State, and Federal regulations governing the operation of motor vehicles. Incumbent must be able to maneuver vehicles over improved and unimproved roads at up to and including highway speeds.
• Work as a team member and assists others as necessary to carry the mission to completion.
• Receives patient transport schedules from the scheduler for the daily patient transportation runs. Each trip is planned for vehicle type, route and equipment needed.
• Familiarity with medical equipment located in patient transport vehicles and be certified in Cardio-Pulmonary resuscitation (CPR) and recertified in CPR every 2 years and provide documentation to the supervisor.
• Transports patients under non-emergency situations to and from various locations throughout the state. Incumbent must be knowledgeable in the proper techniques of loading, unloading and securing patients.
• Enter all required motor vehicle reports and records documentation as directed by the Supervisor. When not operating motor vehicles, report to the Supervisor to assist in the daily operation of the Transportation Section.
• Transport vehicles for repair, maintenance, driver back fill support.
• Complete daily trip report annotating data such as mileage, driving times, any problems encountered with the vehicle and any issues arising with patient transport. Drivers will perform pre-trip inspections on all vehicles before departure.
• Correct minor vehicle problems such as lamps, flat tires, tire pressure and fluid levels, communicating the need for scheduling completion of repairs when outside service is necessary.
• Possess a valid state of Florida driver's license with class "B" (CDL) with passenger endorsement. Provide the Mobility Manager with proof of license and motor vehicle driving record annually.
• Pass a physical examination annually and random drug testing as required for all Government Motor Vehicle Operators.
• Assume responsibility for a cell phone with earpiece, pager, two-way radio or any combination of these.

Duties Include:

• Work off station for long period of time, occasionally at great distances from the Facility.
• Evaluate unusual situations as they arise and make appropriate decisions to ensure the safety of patients.
• Work with minimal supervision and consults with the Supervisor when situations warrant.
• Serves as a patient transportation driver. Demonstrate proficiency in all areas of the transportation service. Complete all required training.
• Drives the following: Shuttle buses Vehicle type: 16 to 32 passenger buses (GVW-14,050 lbs.), 32 passenger bus (GVW-36,350 lbs.), 44 passenger bus (GVW-36,200 lbs.). All other vehicle driven; patient transport Handy-Capped high-top vans (6,900 lbs.), Compact sedans, (GVW-3,936 lbs.) Mini Vans, (GVW-5,400 lbs.), Large passenger vans, (GVW-9, 100lbs.).
• Abide by all City, State, and Federal regulations governing the operation of motor vehicles. Incumbent must be able to maneuver vehicles over improved and unimproved roads at up to and including highway speeds.
• Work as a team member and assists others as necessary to carry the mission to completion.
• Receives patient transport schedules from the scheduler for the daily patient transportation runs. Each trip is planned for vehicle type, route and equipment needed.
• Familiarity with medical equipment located in patient transport vehicles and be certified in Cardio-Pulmonary resuscitation (CPR) and recertified in CPR every 2 years and provide documentation to the supervisor.
• Transports patients under non-emergency situations to and from various locations throughout the state. Incumbent must be knowledgeable in the proper techniques of loading, unloading and securing patients.
• Enter all required motor vehicle reports and records documentation as directed by the Supervisor. When not operating motor vehicles, report to the Supervisor to assist in the daily operation of the Transportation Section.
• Transport vehicles for repair, maintenance, driver back fill support.
• Complete daily trip report annotating data such as mileage, driving times, any problems encountered with the vehicle and any issues arising with patient transport. Drivers will perform pre-trip inspections on all vehicles before departure.
• Correct minor vehicle problems such as lamps, flat tires, tire pressure and fluid levels, communicating the need for scheduling completion of repairs when outside service is necessary.
• Possess a valid state of Florida driver's license with class "B" (CDL) with passenger endorsement. Provide the Mobility Manager with proof of license and motor vehicle driving record annually.
• Pass a physical examination annually and random drug testing as required for all Government Motor Vehicle Operators.
• Assume responsibility for a cell phone with earpiece, pager, two-way radio or any combination of these.

Duties Include:

• Work off station for long period of time, occasionally at great distances from the Facility.
• Evaluate unusual situations as they arise and make appropriate decisions to ensure the safety of patients.
• Work with minimal supervision and consults with the Supervisor when situations warrant.
• Serves as a patient transportation driver. Demonstrate proficiency in all areas of the transportation service. Complete all required training.
• Drives the following: Shuttle buses Vehicle type: 16 to 32 passenger buses (GVW-14,050 lbs.), 32 passenger bus (GVW-36,350 lbs.), 44 passenger bus (GVW-36,200 lbs.). All other vehicle driven; patient transport Handy-Capped high-top vans (6,900 lbs.), Compact sedans, (GVW-3,936 lbs.) Mini Vans, (GVW-5,400 lbs.), Large passenger vans, (GVW-9, 100lbs.).
• Abide by all City, State, and Federal regulations governing the operation of motor vehicles. Incumbent must be able to maneuver vehicles over improved and unimproved roads at up to and including highway speeds.
• Work as a team member and assists others as necessary to carry the mission to completion.
• Receives patient transport schedules from the scheduler for the daily patient transportation runs. Each trip is planned for vehicle type, route and equipment needed.
• Familiarity with medical equipment located in patient transport vehicles and be certified in Cardio-Pulmonary resuscitation (CPR) and recertified in CPR every 2 years and provide documentation to the supervisor.
• Transports patients under non-emergency situations to and from various locations throughout the state. Incumbent must be knowledgeable in the proper techniques of loading, unloading and securing patients.
• Enter all required motor vehicle reports and records documentation as directed by the Supervisor. When not operating motor vehicles, report to the Supervisor to assist in the daily operation of the Transportation Section.
• Transport vehicles for repair, maintenance, driver back fill support.
• Complete daily trip report annotating data such as mileage, driving times, any problems encountered with the vehicle and any issues arising with patient transport. Drivers will perform pre-trip inspections on all vehicles before departure.
• Correct minor vehicle problems such as lamps, flat tires, tire pressure and fluid levels, communicating the need for scheduling completion of repairs when outside service is necessary.
• Possess a valid state of Florida driver's license with class "B" (CDL) with passenger endorsement. Provide the Mobility Manager with proof of license and motor vehicle driving record annually.
• Pass a physical examination annually and random drug testing as required for all Government Motor Vehicle Operators.
• Assume responsibility for a cell phone with earpiece, pager, two-way radio or any combination of these.

We are currently recruiting a Loader Operator to join the team at our Whitburn Operation Centre EH47 7RJ.

Our Yard team are a dedicated team that are crucial to our operation. They love working in all weathers and have a passion for vehicles and working with cars.

We see Copart as a family and as one team we guide and support every teammate, to ensure that we have the skills to tackle every challenge that comes our way.

Our team consistently and promptly respond to customer requests and complete service orders to deadlines. They ensure that vehicles are stored and maintained in line with customer and company standards and operate a handheld device to take images of vehicles.

Main Duties & Responsibilities

• Ensuring that vehicles are maintained according to Company standards and customer requirements
• Providing basic facility maintenance including cleaning, basic repair and yard upkeep
• Recording vehicle information accurately and legibly
• Operating digital cameras and other basic vehicle documentation and tracking devices
• Using a JCB 416 Articulated Loader and Tractor to move vehicles
• Providing excellent customer service
• Following Health & Safety and Company guidelines, to maintain a safe and efficient working environment
• Be able to multi-task in a fast-paced environment
• Happy to work outside, in all weather conditions

What skills do you need to have?

Essential

• Experience in operating a Loader
• Rough Terrain Forklift Truck Licence (Appropriate training will be given to obtain Front Shovel Loader Licence)
• Mechanical experience
• Confident in the use of handheld devices, with experience in the use of basic IT applications
• Excellent customer service skills
• Strong attention to detail
• Great communication skills, both written and verbal

Desirable

• JCB 416 Articulated Loader Experience
• Able to multi-task in a fast paced, commercial environment.
• Excellent attention to detail.
• Ability to operate basic equipment

What we offer you in return:

• Monday to Friday, 40 hours
• 23 days holiday plus bank holidays and an additional day per year to celebrate a special occasion
• A further paid day to volunteer for a charity of your choice
• Contributory workplace pension plan
• Life Assurance cover
• Medicash Cover - look after you and your family, by providing a range of positive healthcare benefits
• Cycle to Work Scheme
• The ability to purchase shares in our successful global company at a discounted rate
• An exclusive deals and discounts website, saving you money on everyday purchases, treats for the family, eating out, and utility bills for the home
• Car Benefits Scheme - we can help you take step towards driving green

Offers of employment are subject to Disclosure & Barring Service (DBS) and employment reference checks

To apply, please click 'Apply Now', which will prompt you to create an account. You will then be able to attach your CV and complete your application

Copart are an equal opportunity employer, proudly hiring a diverse workforce. Discrimination is expressly forbidden and we therefore kindly welcome all applications.

ACR Recruitment & Training LTD are looking for an experienced CNC Turner Setter operator, for our Engineering client based in Coventry to help strengthen their team. This is a permanent position starting immediately for the successful candidate.

Working hours:

• Monday to Thursday - 7:30am to 4:30pm
• Friday - 7:30am to 12:30pm.

As an Experienced CNC Turning Machine Setter/Operator within the turning section

Duties will include:

• Setting, and operating machines using proven programs
• Setting, and operating machines to prove new programs
• Editing of programs
• Interpretation of drawings and 3D digital files
• Produce prototypes / small production runs
• Carry out inspection of your work (CMM and Manual)
• Maintain clean and tidy stations
• Produce work of a high standard by adhering to quality standards to ensure that product is produced to agreed specifications.
• Training Other members of the Turning section in setting machines
• Maintain a good working relationship with colleagues to promote successful teamwork. Experience Required Time served / equivalent experience in a precision machining company

Relevant Engineering Qualification:

• Ideally Apprentice Trained
• Competent in Fanuc controls

(ESSENTIAL)

• Competent in CNC Thread Machining
• Strong understanding of Fanuc programs with ability to edit, re-run tools etc.
• Able to move offsets
• Able to prove unproven programs, safely
• Competent in inspecting own work using CMMs and gauges to verify product quality
• Conversant with Lynx and Doosan machinery (Preferable)
• CAM experience (Preferable)
• Working to tight tolerances
• Experience of working with a wide range of materials including , Inconel, titanium, mild steels, brass, aluminium-bronze, bronzes, aluminium, plastics, super duplex etc.
• Ability to work under pressure with attention to detail
• Team Player
• Flexible

Job Types: Full-time, Part-time, Permanent

Pay: £15.00-£16.00 per hour

Benefits:

• Company pension
• Free parking
• On-site parking

Schedule:

• Monday to Friday

Experience:

• Machining: 4 years (required)