Total 23 job vacancies by Guidant Group

Guidant Global has partnered with a highly reputable Ministry of Defence organisation in the UK, and our client is seeking a proficient Development and Production Test Engineer with expertise in Electronic/Electrical engineering. The role will entail technical support to the manufacturing test of weapons sub-systems in production and development tests and diagnostics of complex weapons at system and subsystem levels.

What we're looking for:

• The ideal candidate should possess an HNC/HND (Electronics) Level of Qualification or an equivalent degree and substantial experience in digital and analogue electronics manufacturing and testing.
• Measurement and testing principles, along with the use of necessary equipment, is an asset.
• Knowledge of the customary CADMID product lifecycle pertaining to test equipment is deemed advantageous.
• RF and microwave technology would be highly beneficial, particularly at the subsystem level.
• Environmental testing, which includes ESS (Environmental Stress Screening), would be considered beneficial for this role.
• Electronic Component level fault finding
• High Voltage training/awareness
• SAP and MS Office Skills
• Manual handling and ESD training.
• Medical requirements
• None Health surveillance requirements

What you'll get to do as a Development and Production Test Engineer - Electronic/Electrical:

• Provide Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations.
• Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions.
• Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level.
• Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme.
• Evaluation of technical problems to develop proposals for test equipment investigations and corrective actions, including process improvements.
• Test Engineering representative at Defect Review Board meetings to ensure efficient progress of equipment and quality notifications towards corrective action.

Security Clearance: British Citizen or a Dual UK national with British citizenship

Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.

More about the role:

MBDA's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at MBDA's headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Our client is a trusted partner of the UK's Ministry of Defence, and they are currently seeking a highly skilled Electrical Manufacturing Technician with extensive experience in the field. The selected candidate will be responsible for various tasks, including assembly, inspection, and testing. They will receive clear direction from a knowledgeable team leader regarding the priorities associated with these functions.

To be an Electrical Manufacturing Technician, one must have a versatile and flexible skillset and be able to certify products. The candidate should be skilled in using a variety of equipment, tools, gauges, and measuring instruments to create, fix, and alter company products to meet specified build standards and requirements.

What we're looking for:

• Strong team player with a focus on customer satisfaction
• Demonstrated ability to plan, organise, and adapt to changing circumstances
• Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship

"OR"

• Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3

"OR"

• Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3

"OR"

• Vocational NVQ3 with Further Education, BTEC ONC/HNC
• Skilled individual with relevant experience (please highlight on your CV)

What you'll get to do as an Electrical Manufacturing Technician:

The candidate is expected to have experience in electrical wiring and assembly and a versatile skill set applicable to various tasks. They should be familiar with manufacturing equipment, tools, and measuring instruments and be able to meet manufacturing build, inspection, and test time requirements. The candidate should uphold high craftsmanship standards and product quality, ensure compliance with manufacturing procedures, prioritise maintaining a safe working environment, and share best practices with team members. Additionally, they should be able to certify products according to the certification procedure and conduct regular audits to maintain product certification and approval.

"Please Note: Our client requires all employees to achieve the appropriate clearance relevant to the role"

More about the role:

Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at their headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Our client is a trusted partner of the UK's Ministry of Defence, and they are currently seeking a highly skilled Electrical Manufacturing Technician with extensive experience in the field. The selected candidate will be responsible for various tasks, including assembly, inspection, and testing. They will receive clear direction from a knowledgeable team leader regarding the priorities associated with these functions.

To be an Electrical Manufacturing Technician, one must have a versatile and flexible skillset and be able to certify products. The candidate should be skilled in using a variety of equipment, tools, gauges, and measuring instruments to create, fix, and alter company products to meet specified build standards and requirements.

What we're looking for:

• Strong team player with a focus on customer satisfaction
• Demonstrated ability to plan, organise, and adapt to changing circumstances
• Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship

"OR"

• Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3

"OR"

• Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3

"OR"

• Vocational NVQ3 with Further Education, BTEC ONC/HNC
• Skilled individual with relevant experience (please highlight on your CV)

What you'll get to do as an Electrical Manufacturing Technician:

The candidate is expected to have experience in electrical wiring and assembly and a versatile skill set applicable to various tasks. They should be familiar with manufacturing equipment, tools, and measuring instruments and be able to meet manufacturing build, inspection, and test time requirements. The candidate should uphold high craftsmanship standards and product quality, ensure compliance with manufacturing procedures, prioritise maintaining a safe working environment, and share best practices with team members. Additionally, they should be able to certify products according to the certification procedure and conduct regular audits to maintain product certification and approval.

Security Clearance: British Citizen or a Dual UK national with British citizenship

Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.

More about the role:

Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at their headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Our client seeks a Manufacturing Technician to support their prestigious Defence client at the Stevenage site. The technician will ensure product certification, use appropriate equipment, tools, gauges, callipers, and measuring instruments, and produce, repair, and modify company products following build standards and specifications.

As a Live Build Manufacturing Technician, you will manufacture, test, and inspect products according to certification procedures, project objectives, budgets and timescales.

What we're looking for:

• Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship
• "OR"
• Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3
• "OR"
• Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3
• "OR"
• Vocational NVQ3 with Further Education, BTEC ONC/HNC Experience in a Manufacturing / Craftsman position.
• ESD training.
• Live Build training (will be provided).

What you'll get to do as a Live Build Manufacturing Technician:

The candidate is expected to possess product certification and approval via regular audits and certify the product in line with the certification procedure. They should maintain a versatile skill base to apply these skills across a range of tasks, be fully conversant with all equipment, tools, and measuring instruments associated with the manufacturing cycle, and ensure manufacturing build, inspection, and test times are met while maintaining high workmanship standards and product quality. Additionally, they should comply with all associated procedures applicable to the manufacturing and be able to apply essential skills across a range of tasks utilising equipment, tools, gauges, and measuring instruments associated with the production, repair, and modification of company products.

Get up to £1,600 a month for accommodation if you do not live within 30 miles from Henlow. Full apprenticeship required - this role is eligible to UK nationals and citizens only.

Security Clearance: British Citizen or a Dual UK national with British citizenship

Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.

More about the role:

Our client's relationship with the U.K. military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at the Stevenage headquarters, crucial for missile operations, with good transport links. Training and development are provided to all employees, and you may qualify for up to £400 per week in lodging expenses if you live more than 30 miles away.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Our client, a trusted partner of the UK's Ministry of Defence, seeks a highly skilled Manufacturing Engineer specialising in Assembly and Integration. The successful candidate will play a crucial role in producing and assembling missiles. This contract opportunity may lead to a permanent position or an extension. A full apprenticeship and certificate copy is required. The role is full-time with a hybrid work schedule - in Bolton.

As the Manufacturing Engineer in charge of missile assembly, it is crucial that you ensure the efficient and cost-effective production of our client's products. Your role in the Manufacturing Engineering team is critical, and you will be accountable for supporting several manufacturing projects.

What we're looking for:

• Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 with a formal further education certificate to HNC or equivalent in a relevant subject.

"or": A BEng degree in a relevant engineering field."

"or": A minimum of twenty years of experience working as a manufacturing engineer."

• Knowledge to interpret design drawings to produce manufacturing build instructions for skilled and semi-skilled operators
• Experience in Electronic Sub Assembly manufacture through to System level builds and expertise and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems.
• Excellent interpersonal and communication skills with the ability to work in a diverse team and the ability to read, analyse and interpret documents for accuracy and compliance with Code
• Effective collaboration, customer understanding, and prompt response are crucial.
• Understand and work with Company Processes and Procedures.
• It is highly essential to have Electrostatic Discharge (ESD) training and SAP experience.

What you'll get to do as a Manufacturing Engineer (Assembly and Integration)

• In charge of compiling and updating manufacturing instructions.
• Responsible for designing, commissioning, and testing the associated tooling.
• Assist in the industrial validation process using tools such as FMEAs and FAIs.
• Resolve technical problems that may arise during the manufacturing process and update route card to reflect changes because of re-works in activities
• To ensure proper configuration control, it's essential to incorporate design modifications into the manufacturing instructions.
• Support the Non-Conformance Process using SAP.

"Please Note: MBDA UK requires all employees to achieve the appropriate clearance relevant to the role"

British Citizen or a Dual UK national with British citizenship

Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.

More about the role

MBDA's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at MBDA's headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Our client seeks a Manufacturing Technician to support their prestigious Defence client at the Stevenage site. The technician will ensure product certification, use appropriate equipment, tools, gauges, callipers, and measuring instruments, and produce, repair, and modify company products following build standards and specifications.

As a Live Build Manufacturing Technician, you will manufacture, test, and inspect products according to certification procedures, project objectives, budgets and timescales.

What we're looking for:

• Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship
• "OR"
• Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3
• "OR"
• Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3
• "OR"
• Vocational NVQ3 with Further Education, BTEC ONC/HNC Experience in a Manufacturing / Craftsman position.
• ESD training.
• Live Build training (will be provided).

What you'll get to do as a Live Build Manufacturing Technician:

The candidate is expected to possess product certification and approval via regular audits and certify the product in line with the certification procedure. They should maintain a versatile skill base to apply these skills across a range of tasks, be fully conversant with all equipment, tools, and measuring instruments associated with the manufacturing cycle, and ensure manufacturing build, inspection, and test times are met while maintaining high workmanship standards and product quality. Additionally, they should comply with all associated procedures applicable to the manufacturing and be able to apply essential skills across a range of tasks utilising equipment, tools, gauges, and measuring instruments associated with the production, repair, and modification of company products.

Get up to £1,600 a month for accommodation if you do not live within 30 miles from Henlow. Full apprenticeship required - this role is eligible to UK nationals and citizens only.

"Please Note: This project is a UK eyes only and requires all employees to achieve the appropriate clearance relevant to the role, but eligible candidates can start on a Baseline with their SC in progress. Join us for something great!"

More about the role:

Our client's relationship with the U.K. military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at the Stevenage headquarters, crucial for missile operations, with good transport links. Training and development are provided to all employees, and you may qualify for up to £400 per week in lodging expenses if you live more than 30 miles away.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Our client is a trusted partner of the UK's Ministry of Defence, and they are currently seeking a highly skilled Electrical Manufacturing Technician with extensive experience in the field. The selected candidate will be responsible for various tasks, including assembly, inspection, and testing. They will receive clear direction from a knowledgeable team leader regarding the priorities associated with these functions.

To be an Electrical Manufacturing Technician, one must have a versatile and flexible skillset and be able to certify products. The candidate should be skilled in using a variety of equipment, tools, gauges, and measuring instruments to create, fix, and alter company products to meet specified build standards and requirements.

What we're looking for:

• Strong team player with a focus on customer satisfaction
• Demonstrated ability to plan, organise, and adapt to changing circumstances
• Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship

"OR"

• Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3

"OR"

• Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3

"OR"

• Vocational NVQ3 with Further Education, BTEC ONC/HNC
• Skilled individual with relevant experience (please highlight on your CV)

What you'll get to do as an Electrical Manufacturing Technician:

The candidate is expected to have experience in electrical wiring and assembly and a versatile skill set applicable to various tasks. They should be familiar with manufacturing equipment, tools, and measuring instruments and be able to meet manufacturing build, inspection, and test time requirements. The candidate should uphold high craftsmanship standards and product quality, ensure compliance with manufacturing procedures, prioritise maintaining a safe working environment, and share best practices with team members. Additionally, they should be able to certify products according to the certification procedure and conduct regular audits to maintain product certification and approval.

"Please Note: Our client requires all employees to achieve the appropriate clearance relevant to the role"

More about the role:

Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at their headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Guidant Global has partnered with a highly reputable Ministry of Defence organisation in the UK, and our client is seeking a proficient Development and Production Test Engineer with expertise in Electronic/Electrical engineering. The role will entail technical support to the manufacturing test of weapons sub-systems in production and development tests and diagnostics of complex weapons at system and subsystem levels.

What we're looking for:

• The ideal candidate should possess an HNC/HND (Electronics) Level of Qualification or an equivalent degree and substantial experience in digital and analogue electronics manufacturing and testing.
• Measurement and testing principles, along with the use of necessary equipment, is an asset.
• Knowledge of the customary CADMID product lifecycle pertaining to test equipment is deemed advantageous.
• RF and microwave technology would be highly beneficial, particularly at the subsystem level.
• Environmental testing, which includes ESS (Environmental Stress Screening), would be considered beneficial for this role.
• Proficient in oral and written communication, capable of creating comprehensive test specifications, operator instructions, and technical reports based on complex higher-level requirements.
• Proven analytical and problem-solving skills, with strong attention to detail.
• Plan and organise own work to ensure multiple tasks can be prioritised and delivered against Project objectives.
• Manual handling and ESD training.
• Medical requirements
• None Health surveillance requirements

What you'll get to do as a Development and Production Test Engineer - Electronic/Electrical:

This job involves providing Test Engineering support throughout the different stages of the Design/Development process until Production Readiness Review and release to Operations. You will assist in introducing Test Facilities and ensure that the equipment and facilities are under configuration control before use. Your duties will also involve supporting the testing of electrical/electronic weapon systems and sub-assemblies, including diagnosing production test failures down to circuit card and component levels. You will promptly identify remedial and corrective actions, evaluate technical problems, develop proposals for test equipment investigations and corrective actions, and represent Test Engineering at Defect Review Board meetings to ensure efficient progress towards corrective action.

More about the role:

Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at their headquarters site in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Our client is a trusted partner of the UK's Ministry of Defence, and they are currently seeking a highly skilled Electrical Manufacturing Technician with extensive experience in the field. The selected candidate will be responsible for various tasks, including assembly, inspection, and testing. They will receive clear direction from a knowledgeable team leader regarding the priorities associated with these functions.

To be an Electrical Manufacturing Technician, one must have a versatile and flexible skillset and be able to certify products. The candidate should be skilled in using a variety of equipment, tools, gauges, and measuring instruments to create, fix, and alter company products to meet specified build standards and requirements.

What we're looking for:

• Strong team player with a focus on customer satisfaction
• Demonstrated ability to plan, organise, and adapt to changing circumstances
• Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship

"OR"

• Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3

"OR"

• Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3

"OR"

• Vocational NVQ3 with Further Education, BTEC ONC/HNC
• Skilled individual with relevant experience (please highlight on your CV)

What you'll get to do as an Electrical Manufacturing Technician:

The candidate is expected to have experience in electrical wiring and assembly and a versatile skill set applicable to various tasks. They should be familiar with manufacturing equipment, tools, and measuring instruments and be able to meet manufacturing build, inspection, and test time requirements. The candidate should uphold high craftsmanship standards and product quality, ensure compliance with manufacturing procedures, prioritise maintaining a safe working environment, and share best practices with team members. Additionally, they should be able to certify products according to the certification procedure and conduct regular audits to maintain product certification and approval.

"Please Note: Our client requires all employees to achieve the appropriate clearance relevant to the role"

More about the role:

Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at their headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

We are Guidant Global and are collaborating with a highly esteemed partner of the Ministry of Defence in the UK. Our client is looking for a proficient Manufacturing Controller who can effectively load, control, and monitor work packages in a manufacturing environment.

What we're looking for:

• Emphasise relevant experience in stores or manufacturing/inventory control within a manufacturing environment. (highly essential, please ensure to highlight in detail on your CV)
• Manual handling, lifting, and slinging, including overhead cranes training required
• Proficiency in PC skills such as Excel required
• Forklift truck, medical clearance, ESD training and FLT license required
• Knowledge of Kanban and two-bin systems are necessary
• Experience with Enterprise Planning Systems like SAP required is a must.
• The worker will be responsible for checking in MOD-owned or leased equipment to various areas within MBDA while situated within the MOD stores section.
• Applicants must have prior experience in Stores and booking in/out of kit.
• Warehousing experience is irrelevant.

What you'll get to do as a Manufacturing Controller:

The ideal candidate must possess a strong background in Manufacturing control and Enterprise Planning System such as SAP. Familiarity with Kanban and two bin systems is a plus. The role involves managing inventory and stores, stock control, and shelf-life control, which is highly essential. The candidate will be responsible for checking in MOD owned/leased kit to various areas within MBDA and must have prior experience in booking in/out of kit and updating the computer records. The candidate will also be responsible for loading the manufacturing cells with the requisite jobs to comply with manufacturing programmes and delivery schedules. Other tasks include packaging using hand tools, issuing and receiving tooling, kitting, and loading and unloading of Lorries.

"Please Note: Our client requires all employees to achieve the appropriate clearance relevant to the role".

More about the role:

Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at the headquarters site in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Get up to £1,600 a month for accommodation if you do not live within 30 miles from Henlow. Full apprenticeship required - this role is eligible to UK nationals and citizens only.

Our client seeks a Manufacturing Technician to support their prestigious Defence client at the Stevenage site. The technician will ensure product certification, use appropriate equipment, tools, gauges, callipers, and measuring instruments, and produce, repair, and modify company products following build standards and specifications.

As a Live Build Manufacturing Technician, you will manufacture, test, and inspect products according to certification procedures, project objectives, budgets and timescales.

What we're looking for:

• Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship
• "OR"
• Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3
• "OR"
• Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3
• "OR"
• Vocational NVQ3 with Further Education, BTEC ONC/HNC Experience in a Manufacturing / Craftsman position.
• ESD training.
• Live Build training (will be provided).

What you'll get to do as a Live Build Manufacturing Technician:

The candidate is expected to possess product certification and approval via regular audits and certify the product in line with the certification procedure. They should maintain a versatile skill base to apply these skills across a range of tasks, be fully conversant with all equipment, tools, and measuring instruments associated with the manufacturing cycle, and ensure manufacturing build, inspection, and test times are met while maintaining high workmanship standards and product quality. Additionally, they should comply with all associated procedures applicable to the manufacturing and be able to apply essential skills across a range of tasks utilising equipment, tools, gauges, and measuring instruments associated with the production, repair, and modification of company products.

"Please Note: This project is a UK eyes only and requires all employees to achieve the appropriate clearance relevant to the role, but eligible candidates can start on a Baseline with their SC in progress. Join us for something great!"

More about the role:

Our client's relationship with the U.K. military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at the Stevenage headquarters, crucial for missile operations, with good transport links. Training and development are provided to all employees, and you may qualify for up to £400 per week in lodging expenses if you live more than 30 miles away.

Guidant Global is acting as an Employment Business in relation to this vacancy.

"Get up to £1,600 a month for accommodation if you do not live within 30 miles from the site. Full apprenticeship required - this role requires all employees to achieve the appropriate clearance."

Our client is a trusted partner of the UK Ministry of Defence and is searching for a Mechanical Manufacturing Technician. The ideal candidate should possess a versatile skill set and be capable of certifying the product. They should also be able to apply their knowledge across various tasks using equipment, tools, gauges, and measuring instruments. The tasks will involve producing, repairing, and modifying the company's products, meeting defined build standards and specification requirements.

What we're looking for:

• Standard technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 (Apprenticeship relevant to the role)
• Formal further education certificate to HNC or equivalent Certification.
• Demonstrate planning, organising skills, adaptability, and flexibility.
• Team player resilience with customer focus efforts.
• Experience as a skilled person and ESD training.

What you'll get to do as a Mechanical Manufacturing Technician:

• Certifying the product and possessing a versatile skill base, with a capability to apply their skills across a scope of tasks
• Utilising equipment and tools, gauges and measuring instruments associated with the production, repair, and modification of company products.
• Certify the product in line with the product certification procedure and maintain product certification and approval via regular audits.
• Be fully conversant with all equipment, tools and measuring instruments.
• Ensure manufacturing build, inspection, and test times meet relevance and meet defined build standards and specification requirements.
• Check and complete all paperwork associated with the manufacturing data pack.
• Maintain the highest level, workmanship standards and product quality.
• Ensure compliance with all associated procedures applicable to the manufacturing process.

"Please Note: Our client UK requires all employees to achieve the appropriate clearance relevant to the role"

More about the role

Our client has been working with the UK military for over 70 years, providing essential defence engineering solutions that have played a significant role in meeting the needs of the armed forces across land, sea, and air. They have delivered numerous landmarks in this field, cementing their strong relationship with the military.

This position is at our client's headquarters in Stevenage, a crucial hub for missile operations. The site is conveniently situated near transportation links and features an onsite gym and coffee shop. All employees are provided with training and development opportunities.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Our client is a trusted partner of the UK's Ministry of Defence, and they are currently seeking a highly skilled Electrical Manufacturing Technician with extensive experience in the field. The selected candidate will be responsible for various tasks, including assembly, inspection, and testing. They will receive clear direction from a knowledgeable team leader regarding the priorities associated with these functions.

To be an Electrical Manufacturing Technician, one must have a versatile and flexible skillset and be able to certify products. The candidate should be skilled in using a variety of equipment, tools, gauges, and measuring instruments to create, fix, and alter company products to meet specified build standards and requirements.

What we're looking for:

• Strong team player with a focus on customer satisfaction
• Demonstrated ability to plan, organise, and adapt to changing circumstances
• Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship

"OR"

• Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3

"OR"

• Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3

"OR"

• Vocational NVQ3 with Further Education, BTEC ONC/HNC
• Skilled individual with relevant experience (please highlight on your CV)

What you'll get to do as an Electrical Manufacturing Technician:

The candidate is expected to have experience in electrical wiring and assembly and a versatile skill set applicable to various tasks. They should be familiar with manufacturing equipment, tools, and measuring instruments and be able to meet manufacturing build, inspection, and test time requirements. The candidate should uphold high craftsmanship standards and product quality, ensure compliance with manufacturing procedures, prioritise maintaining a safe working environment, and share best practices with team members. Additionally, they should be able to certify products according to the certification procedure and conduct regular audits to maintain product certification and approval.

"Please Note: Our client requires all employees to achieve the appropriate clearance relevant to the role"

More about the role:

Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at their headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Our esteemed client, a trusted partner of the UK Ministry of Defence, are seeking a Manufacturing Project Manager. The Manager's role would be to work closely with the Programme Managers and Manufacturing Management Team to devise, strategise, direct, and execute the manufacturing projects/contracts while ensuring strict adherence to the business plan targets through efficient cost control and timely schedule management.

The Manufacturing Project Manager role requires Managing stakeholder interfaces, including internal customers, and ensuring accurate reporting of progress against all aspects of project performance.

What we're looking for:

• Skilled Project Manager with a successful history of completing fixed-cost programs of substantial value in a matrix organisation.
• Experience in an engineering or production setting is preferred.
• Skilled in communication, adept at forming solid connections, experienced in leading teams with varied functions, and capable of meeting tight deadlines.
• Enthusiastic, proactive, and tenacious individual who can prioritise and understand strategic business needs while managing day-to-day tactical decisions.
• Experience using project management skills as an assistant in a suitable business setting
• ESD training medical requirements.
• No Health surveillance requirements

Additional skills required:

• Relationship builder
• Maintenance of plans and budgets (Essential)
• Experience in Project Management (Essential)

What you'll get to do as a Manufacturing Project Manager:

• Responsible for planning, facilitating, and providing support for the success of large-scale contracts throughout the product life cycle.
• Developing and maintaining essential relationships with internal customers and key subcontractors.
• Ensuring accurate reporting of progress across all aspects of project performance and interpreting requirements for manufacturing.
• Help create and manage plans and budgets related to contract risks and opportunities.
• Conveying the necessary project/program requirements to a diverse team, ensuring successful completion.
• Playing a pivotal role in tendering/bidding activities associated with a prosperous future business acquisition.

"Please Note: This project is a UK eyes only requires all employees to achieve the appropriate clearance relevant to the role".

More about the role:

Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at their headquarters site in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Our client is a trusted partner of the UK's Ministry of Defence, and they are currently seeking a highly skilled Electrical Manufacturing Technician with extensive experience in the field. The selected candidate will be responsible for various tasks, including assembly, inspection, and testing. They will receive clear direction from a knowledgeable team leader regarding the priorities associated with these functions.

To be an Electrical Manufacturing Technician, one must have a versatile and flexible skillset and be able to certify products. The candidate should be skilled in using a variety of equipment, tools, gauges, and measuring instruments to create, fix, and alter company products to meet specified build standards and requirements.

What we're looking for:

• Strong team player with a focus on customer satisfaction
• Demonstrated ability to plan, organise, and adapt to changing circumstances
• Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship

"OR"

• Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3

"OR"

• Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3

"OR"

• Vocational NVQ3 with Further Education, BTEC ONC/HNC
• Skilled individual with relevant experience (please highlight on your CV)

What you'll get to do as an Electrical Manufacturing Technician:

The candidate is expected to have experience in electrical wiring and assembly and a versatile skill set applicable to various tasks. They should be familiar with manufacturing equipment, tools, and measuring instruments and be able to meet manufacturing build, inspection, and test time requirements. The candidate should uphold high craftsmanship standards and product quality, ensure compliance with manufacturing procedures, prioritise maintaining a safe working environment, and share best practices with team members. Additionally, they should be able to certify products according to the certification procedure and conduct regular audits to maintain product certification and approval.

"Please Note: Our client requires all employees to achieve the appropriate clearance relevant to the role"

More about the role:

Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at their headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Proud member of the Disability Confident employer scheme