Total 31 Engineering job vacancies in Perkantoran Tanjung Mas Raya, Merpati Mas, Blok B1 No. 34, Jl. Raya Lenteng Agung

工作職責：

• 協調客戶或內部工具提供的新模具的新試運行。
• 建立以最短的周期時間生產最佳產品品質的流程，同時注意機器和模具的安全。
• 對新的或現有的模具、新產品和機器進行評估：預測機器、製程、模具或材料的具體問題。
• 進行室內產品分析和調查。
• 進行流程改進並為專案進一步改進提供想法。
• 必要時與客戶方就任何技術和品質問題進行互動。
• 在新產品批量生產前對進度進行監控和執行SPC。
• 確保所有產品都有適當的工程文件和工作手冊。
• 從新項目到零件批准階段與其他部門的合作包括參加NPEA會議和能力審查會議。

要求：

• 至少獲得工程文憑或同等學歷，並在塑膠射出製造環境中擁有至少 2 年相關經驗。
• 擅長分析根本原因並使用統計圖表。
• 強大的計劃、分析思考能力和解決問題的能力。
• 良好的人際交往能力，能夠作為團隊的一部分工作，激勵團隊努力並在現實的時間內實現目標。
• 積極主動，能夠在最少的監督下獨立工作。

津貼和福利：

• 開放文化
• 個人發展機會
• 每週工作 5 天

Job Responsibilities:

• To coordinate new test run of new mould supplied by customer or in-house tooling.
• To establish process that produces the best product quality with minimum cycle time at the same time taking care of machine and mould safety.
• To perform evaluation of new or existing mould, new product and machines: anticipate specific problem from machine, process, mould or material.
• To perform interior product analysis and investigation.
• To perform process improvement and contribute ideas for project further improvement.
• To interact with the counterpart on the customer side on any technical and quality issues when required.
• To monitor and perform SPC on new product before mass production on progress.
• To ensure proper engineering documentation and working manual for all products.
• To collaborate with other departments from new project till part approval stage included attending NPEA meeting and Capability Review Meeting.

Requirements:

• Process at least Diploma in Engineering or equivalent with at least 2 years relevant experience in a Plastic Injection Molding manufacturing environment.
• Excellent in analysis of root causes and use statistical chart.
• Strong planning, analytical thinker and problem solving skill.
• Good interpersonal skill, ability to work as part of team, to motivate team efforts and to deliver targets within realistic timelines.
• Pro- active and able to work independently with minima supervision.

Perks & Benefits:

• Open culture
• Personal development opportunities
• 5-day workweek

1. Melakukan Monitoring, maintenance, dan Evaluasi terhadap infrastruktur Call Center Polri dalam kondisi terbaik dan berfungsi secara optimal mengacu kepada standart dan kualitas untuk menghasilkan pelayanan sesuai dengan standar yang ditetapkan.

2. Menjamin seluruh teknologi yang terkait dengan pelayanan berfungsi secara optimal mengacu kepada standart dan kualitas yang ditetapkan.

3. Menjaga aktifitas infrastruktur CC Polri berjalan dengan baik 

4. melakukan monitoring, koordinasi, dan evaluasi pengendalian evaluasi pengendalian teknis terhadap infrastruktur CC

5. Memastikan infrastruktur CC dalam kondisi terbaik untuk menghasilkan pelayanan sesuai standar

6. Melaksanakan program maintenance terhadap infrastruktur CC sesuai dengan jadwal yang telah di tetapkan

7. Melakukan backup dan restore data

1. Melakukan Monitoring, maintenance, dan Evaluasi terhadap infrastruktur Call Center Polri dalam kondisi terbaik dan berfungsi secara optimal mengacu kepada standart dan kualitas untuk menghasilkan pelayanan sesuai dengan standar yang ditetapkan.

2. Menjamin seluruh teknologi yang terkait dengan pelayanan berfungsi secara optimal mengacu kepada standart dan kualitas yang ditetapkan.

3. Menjaga aktifitas infrastruktur CC Polri berjalan dengan baik 

4. melakukan monitoring, koordinasi, dan evaluasi pengendalian evaluasi pengendalian teknis terhadap infrastruktur CC

5. Memastikan infrastruktur CC dalam kondisi terbaik untuk menghasilkan pelayanan sesuai standar

6. Melaksanakan program maintenance terhadap infrastruktur CC sesuai dengan jadwal yang telah di tetapkan

7. Melakukan backup dan restore datapol

Tasks & Responsibilities

• Melakukan pekerjaan perawatan mekanik / listrik / elektronik / instrumen mesin-mesin produksi sesuai dengan jadwal dan petunjuk yang sudah ditentukan
• Memeriksa kemampuan peralatan mekanik / listrik / elektronik / instrumentasi yang ada dengan alat ukur untuk memastikan bawah peralatan tersebut dalam kondisi prima
• Melakukan troubleshooting peralatan mekanik / listrik mesin produksi
• Mempersiapkan peralatan dan bahan-bahan untuk digunakan dalam perawatan dan perbaikan peralatan mekanik / listrik mesin-mesin produksi
• Melakukan pekerjaan perbaikan di workshop atau laboratorium listrik / elektronik

A.  Qualifications:

• Minimum education: SMK (Vocational High School) in Electrical Engineering, D3 Electrical, or S1 Electrical Engineering
• Strong and adequate physical condition
• Maximum age of 30
• Expertise in low and high voltage electrical systems and electronic equipment
• Proficient in handling generators, main panels, electrical network installations, also create or develop electrical systems also blueprints.
• create, calculating and develop electrical schematics (wiring diagram, SLD, Electrical Block Diagram), as well as maintenance and repairs
• Able to work both in a team and individually
• Able to work under pressure
• Willing to handle tasks outside of electrical work that are part of the FEM (Facility, Equipment & Maintenance) division
• Willing to work in shifts and available for on-call duty outside of normal working hours
• Interview will be conducted online
• Male applicants only
• Must be domiciled in the Subang area, West Java (Prioritize for Pusakanagara, Sukra, Pamanukan, Compreng, Bojong, Ciasem and surrounding)

Preferred Qualifications:

• Strong understanding of electrical theory and practice
• Knowledgeable in electrical distribution panel assembly
• Proficient in using AutoCAD software
• Minimum of 3 years of experience
• Possession of a professional engineer certification or relevant professional qualification certificate is highly preferred (LSP/BNSP or equivalent)
• Basic understanding of pump control systems and plumbing
• Familiarity with IP CCTV systems, door access, and other automation systems
• Holder of a valid SIM A (driver's license)

B.  Job Description:

Responsibilities include:

• Developing and adhering to technical specifications and electrical engineering standards
• Integrating electrical systems with other systems, such as machinery or software, to ensure seamless operation
• Diagnosing electrical system faults, proposing solutions, and performing repairs
• Ensuring on-site electrical engineering practices comply with safety regulations and industry standards
• Repairing electrical panel boxes and cable connections
• Conducting regular inspections and general electrical maintenance

Perawatan dan perbaikan Kelistrikan Mesin dan Industri.

• Mencari customer baru dan menjaga hubungan baik dengan customer
• Melakukukan presentasi produk ke customer
• Melakukan peninjauan langsung ke lapangan atau proyek yang sedang berjalan
• Membuat laporan harian atas kegiatan marketing yang dilakukan
• Bekerja sama dengan tim untuk mencapai target kerja

• Check and review structural document
• Calculate structural project
• Site checking with Deputy Manager
• Check shop drawings
• Produce minutes of meetings

• Check and review shop drawings
• Calculate MEP requirement
• Site check and coordination
• Produce minutes of meetings

• Servicing and repairing boilers across a diverse rented housing portfolio.
• Ensuring all work complies with safety regulations and industry standards.
• Diagnosing and resolving issues efficiently to minimise downtime for tenants.
  
  

• Proven experience in servicing and repairing boilers, particularly in rented housing.
• Relevant qualifications and certifications in gas engineering.
• Excellent communication skills to interact with tenants and team members.
  
  

Design of offshore oil and gas production facilities by developing mechanical design concepts and drawings, performing mechanical calculations, reviewing and implementing mechanical design criteria, specifications, government regulations and industry codes.

Mastering building maintenance & structur, PLC and operate CNC Machine

Have knowledge AutoCad and Ms. Office

Able to speak in English

• Server Performance Monitoring: Proactively monitor server performance within a 24/7 environment to ensure systems are operating smoothly.
• Issue Resolution: Address and resolve server-related issues within specified timeframes in accordance with Service Level Agreements (SLAs).
• Troubleshooting: Identify and resolve server issues, including those related to the operating system and server applications.
• Documentation and Reporting: Prepare routine reports on server performance and status using Office applications (Excel, Word).

1. Work with certain parties in Manufacturing and Regional Site to develop new product in accordance with regulation Global Regulation and International Toys Safety Regulation Standards.
2. Create quality testing standard method
3. Ensure and maintain company high level reliability on toy development to meet corporate requirement
4. Prepare certification package prior to product release to production
5. Responsible to cover some QC function to support smooth production operation.