Total 5 job vacancies by Guidant Group

Global Giants in Missile and Defence a trusted partner of the UK's Ministry of Defence, are seeking an experienced production test engineer with expertise in live build. This role entails providing Technical Support for manufacturing test of weapons systems and performing live build production tests and diagnostics of complex weapons at both a system and subsystem levels.

What we're looking for:

• Minimum HNC/HND or equivalent.
• Must have significant experience with measurement and test principles, and associated test equipment.
• Electronic system and sub-system level fault finding.
• CADMID product lifecycle for test equipment is desirable.
• RF and microwave technology at system level would be an advantage.
• High Voltage training/awareness.
• SAP Beneficial
• MS Office skills including technical specification and report preparation.

What you'll get to do as a Production Test Engineer - (Live Build) in Electronic/Electrical:

The role of a Production Test Engineer - Live Build (Electronic/Electrical) in the manufacturing department involves providing technical support for the manufacturing test of weapons systems in live build production test and diagnostics of complex weapons at the system and subsystem level. ​ This includes supporting the test engineering process during the design and development phases, ensuring the readiness of test facilities and equipment, and conducting testing and diagnosis of electrical/electronic weapon systems. ​ The engineer is responsible for identifying and implementing remedial and corrective actions to address production test failures and technical problems, as well as proposing improvements to test equipment and processes. ​ They also serve as a representative at Defect Review Board meetings to facilitate the resolution of equipment and quality issues. ​ The role requires a good understanding of electronics, measurement and test principles, as well as strong analytical and problem-solving skills. ​ Effective communication, planning, and organisation skills are also essential for prioritising and delivering tasks. Additionally, the engineer should have relevant qualifications and training in electronics, manual handling, ESD, and medical requirements/health surveillance. ​

Security Clearance: British Citizen or a Dual UK national with British citizenship

Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.

More about the role:

For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air.

This role is based near our client's headquarters site in Stevenage, which plays a key part in missile operations. The site also offers excellent transportation links. Training and development are provided to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Our esteemed client, a trusted partner of the UK Ministry of Defence, are seeking a proficient Mechanical Inspector to join their certification team at the Stevenage site. In this role, you will be responsible for authorising the product in compliance with our product certification procedure, thereby playing a pivotal role in ensuring product quality and safety.

What we're looking for:

• Formal technical engineering/craft apprenticeship (TR23/TR21) or HNC qualification.
• Proactive problem-solving skills and a strong commitment to teamwork and achieving business goals.
• Significant experience in Mechanical Inspection - must be inspection of other people's work, self-certified work is not sufficient.
• Several years of experience as a skilled professional in the field.
• Preferably IPC 610 certified/trained.

What you'll get to do as a Mechanical Inspector:

• Thoroughly examine assembled parts to ensure correct assembly, identifying any faults in finishing, painting, or surface deterioration.
• Conduct inspections for physical damage and perform intermediate checks to ensure product certification and approval through regular audits.
• Monitor and oversee product certification operators, ensuring adherence to quality standards, and complete all associated paperwork, including manufacturing data packs, defect reports, and data records.
• Segregate defective items from good products and maintain proper control over them.
• Prepare inspection and quality control documentation, including history sheets, and utilise specialised inspection tools.
• Ensure compliance with all applicable procedures throughout the manufacturing process.
• Uphold the highest standards of workmanship and product quality.

Security Clearance: British Citizen or a Dual UK national with British citizenship

Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.

More about the role:

Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is located near MDA's headquarters in Stevenage, a key site for missile operations. The location offers excellent transportation links. Additionally, all employees receive comprehensive training and development opportunities.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Global Giants in Missile and Defence a trusted partner of the UK's Ministry of Defence, are seeking an experienced production test engineer with expertise in live build. This role entails providing Technical Support for manufacturing test of weapons systems and performing live build production tests and diagnostics of complex weapons at both a system and subsystem levels.

What we're looking for:

• Minimum HNC/HND or equivalent.
• Must have significant experience with measurement and test principles, and associated test equipment.
• Electronic system and sub-system level fault finding.
• CADMID product lifecycle for test equipment is desirable.
• RF and microwave technology at system level would be an advantage.
• High Voltage training/awareness.
• SAP Beneficial
• MS Office skills including technical specification and report preparation.

What you'll get to do as a Production Test Engineer - (Live Build) in Electronic/Electrical:

The role of a Production Test Engineer - Live Build (Electronic/Electrical) in the manufacturing department involves providing technical support for the manufacturing test of weapons systems in live build production test and diagnostics of complex weapons at the system and subsystem level. ​ This includes supporting the test engineering process during the design and development phases, ensuring the readiness of test facilities and equipment, and conducting testing and diagnosis of electrical/electronic weapon systems. ​ The engineer is responsible for identifying and implementing remedial and corrective actions to address production test failures and technical problems, as well as proposing improvements to test equipment and processes. ​ They also serve as a representative at Defect Review Board meetings to facilitate the resolution of equipment and quality issues. ​ The role requires a good understanding of electronics, measurement and test principles, as well as strong analytical and problem-solving skills. ​ Effective communication, planning, and organisation skills are also essential for prioritising and delivering tasks. Additionally, the engineer should have relevant qualifications and training in electronics, manual handling, ESD, and medical requirements/health surveillance. ​

"Please Note: This project is a UK eyes only requires all employees to achieve the appropriate clearance relevant to the role".

More about the role:

For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air.

This role is based near our client's headquarters site in Stevenage, which plays a key part in missile operations. The site also offers excellent transportation links. Training and development are provided to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Our esteemed client, a trusted partner of the UK Ministry of Defence, are seeking a proficient Mechanical Inspector to join their certification team at the Stevenage site. In this role, you will be responsible for authorising the product in compliance with our product certification procedure, thereby playing a pivotal role in ensuring product quality and safety.

What we're looking for:

• Formal technical engineering/craft apprenticeship (TR23/TR21) or HNC qualification.
• Proactive problem-solving skills and a strong commitment to teamwork and achieving business goals.
• Significant experience in Mechanical Inspection - must be inspection of other people's work, self-certified work is not sufficient.
• Several years of experience as a skilled professional in the field.
• Preferably IPC 610 certified/trained.

What you'll get to do as a Mechanical Inspector:

• Thoroughly examine assembled parts to ensure correct assembly, identifying any faults in finishing, painting, or surface deterioration.
• Conduct inspections for physical damage and perform intermediate checks to ensure product certification and approval through regular audits.
• Monitor and oversee product certification operators, ensuring adherence to quality standards, and complete all associated paperwork, including manufacturing data packs, defect reports, and data records.
• Segregate defective items from good products and maintain proper control over them.
• Prepare inspection and quality control documentation, including history sheets, and utilise specialised inspection tools.
• Ensure compliance with all applicable procedures throughout the manufacturing process.
• Uphold the highest standards of workmanship and product quality.

"Please Note: Our client requires that all employees obtain the necessary clearance pertinent to their respective roles."

More about the role:

Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is located near MDA's headquarters in Stevenage, a key site for missile operations. The location offers excellent transportation links. Additionally, all employees receive comprehensive training and development opportunities.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Global Giants in Missile and Defence a trusted partner of the UK's Ministry of Defence, are seeking an experienced production test engineer with expertise in live build. This role entails providing Technical Support for manufacturing test of weapons systems and performing live build production tests and diagnostics of complex weapons at both a system and subsystem levels.

What we're looking for:

• Minimum HNC/HND or equivalent.
• Must have significant experience with measurement and test principles, and associated test equipment.
• Electronic system and sub-system level fault finding.
• CADMID product lifecycle for test equipment is desirable.
• RF and microwave technology at system level would be an advantage.
• High Voltage training/awareness.
• SAP Beneficial
• MS Office skills including technical specification and report preparation.

What you'll get to do as a Production Test Engineer - (Live Build) in Electronic/Electrical:

The role of a Production Test Engineer - Live Build (Electronic/Electrical) in the manufacturing department involves providing technical support for the manufacturing test of weapons systems in live build production test and diagnostics of complex weapons at the system and subsystem level. ​ This includes supporting the test engineering process during the design and development phases, ensuring the readiness of test facilities and equipment, and conducting testing and diagnosis of electrical/electronic weapon systems. ​ The engineer is responsible for identifying and implementing remedial and corrective actions to address production test failures and technical problems, as well as proposing improvements to test equipment and processes. ​ They also serve as a representative at Defect Review Board meetings to facilitate the resolution of equipment and quality issues. ​ The role requires a good understanding of electronics, measurement and test principles, as well as strong analytical and problem-solving skills. ​ Effective communication, planning, and organisation skills are also essential for prioritising and delivering tasks. Additionally, the engineer should have relevant qualifications and training in electronics, manual handling, ESD, and medical requirements/health surveillance. ​

"Please Note: This project is a UK eyes only requires all employees to achieve the appropriate clearance relevant to the role".

More about the role:

For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air.

This role is based near our client's headquarters site in Stevenage, which plays a key part in missile operations. The site also offers excellent transportation links. Training and development are provided to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.