Total 553 maintenance job vacancies in Australia

Duties include but are not limited to the following;

• Make repairs that can be accomplished by removing, replacing, tightening, splicing, soldering, and insulating defective wiring, controls, equipment, and fixtures such as broken and bare wiring, burned out switches and relays, loose connections and fittings, damaged light fixtures, and poorly operating thermostats with the aid of an journeyman level HVAC technician or electrician.
• Receive work orders, oral instructions, and wiring diagrams that indicate the nature of the repair or installation to be made, the layout and placement of circuitry, fixtures, and controls, and the types of wiring, parts, and equipment installed.
• Responsibility for planning, materials, tools, and techniques with little or no advice.
• Works as a plumber repairing new and existing utility, supply, and disposal systems and equipment such as sewage, water, oil, and gas distribution systems, and water closets, tubs, fire sprinkler systems, and showers. Incumbent works from building plans, blueprints, and sketches.
• Works as a painter and coats surfaces using accepted methods of the painting trade including special finishing techniques such as marbling and graining, but using coating materials that are prepared in special as well as common ways, and by applying coating techniques that ensure surfaces have a smooth textured and decorative appearance and meet thickness and level requirements.
• Utilizes carpentry skills to construct, install, repair, and modify wood and wood substitute structures and items requiring close tolerance fit and structural soundness.
• Locate broken, worn, damaged, or poorly operating wiring, fixtures, controls, and equipment through visual check or through use of a small variety of test equipment, for example, test lamps, voltage testers, ammeters, and polarity testers.
• Completes various HVAC related preventive maintenance tasks including but not limited to filter and belt replacement in air handlers, ceiling and floor mounted fan coil units. cleans and maintains refrigeration and air conditioning evaporator and condenser coils.
• Must be able to work well with others having a good attitude and the ability to switch gears quickly as priorities can change on an hourly basis. Must contribute positively to the successful operation of the facilities department.

• Read structural blueprints to perform repairs.
• Read blueprints to perform new structure construction.
• Use tools used in repairing dry wall.
• Use tools used in plumbing repairs.
• Construct wood structures such as floors and walls.
• Install basic electrical components such as outlet boxes.
• Use basic plumbing components.
• Cut accurate straight, angled, and curved cuts on wood products.
• Determine the layout of work sequences.
• Use T-Squares.

Maintenance Engineer

Location: Warrington, Cheshire
Salary: Competitive, DOE + Benefits
Contract: Full time, Permanent

Benefits:

* Competitive Salary
* Additional On Call and Call Out Rate
* Pension Contribution
* Annual Company Performance Bonus

Vantrunk an internationally renowned manufacturer of engineered cable management products and associated support systems for over 50 years. We have established ourselves as a leader in the development of proven and innovative cable management solutions engineered to thrive in extreme environments.

We are looking to recruit a Maintenance Engineer to join our team.

Maintenance Engineer - The Role:

This role involves responding to breakdowns and maintain site wide electrical & mechanical systems including facilities at Vantrunk in order to minimise engineering downtime.

As our Maintenance Engineer you will provide continuous improvement support for all on site functions and business needs.

Maintenance Engineer - Key responsibilities:

* Conduct all engineering activities safely and professionally, ensuring compliance with current legislation and procedures at all times.
* Conduct planned maintenance, breakdown and statutory checks as required.
* Working as part of engineering team on site, strive to keep engineering downtime to a minimum, prioritising tasks to meet business needs.
* Be prepared to work additional hours to cover emergency situations.
* Improve machine availability, Learn and understand machine processes and operation
* Control contractors; induction and permits, ensuring safe and compliant work on site.
* Participate in a range of business-related projects and processes both engineering and non-engineering.
* Maintain and inspect all facilities on site essential services.
* Liaise with suppliers on technical requirements for parts and service, acquiring prices and generating purchase requests for authorisation and ordering.
* Develop operating standards and practices to ensure efficient running of machines and autonomous maintenance.

Maintenance Engineer - The Candidate:

* Must have an ONC in Engineering or equivalent
* Technical fault-finding skills
* Ability to work from drawings
* Good computer skills
* Understanding Pneumatic & Hydraulic systems
* Previous experience in a similar role is also essential

If you wish to begin a career with the opportunity to progress in a business-to-business environment, please click APPLY and send us your up-to-date CV and cover letter today!

No Agencies please.

Maintenance Electrician (Maintenance Engineer)

Buxton

Competitive Salary DOE + Regular Overtime (1.5x) + Increasing Holidays (Up to 25) + Bank Holidays + Pension + Training + Progression

Days Based 39 Hours per Week (More Hours Available)

Monday - Thursday 06:00 - 15:00. Friday - 06:00 -11:00

OR

Monday - Thursday 07:30 - 16:30. Friday - 07:30 -12:30

Maintenance Electrician required for a heavy engineering company in the Buxton area. This is a great opportunity for an electrically biased engineer to join a growing company who can offer fantastic training and overtime opportunities within a days-based position.

Candidates will need to be a qualified electrician and can come from any background working with control circuits, PLCs, variable speed drives etc. You will need experience working in an industrial environment – manufacturing and/or heavy industry experience would be advantageous but not essential.

The successful candidate will be responsible for carrying out electrical fault finding and repair work on a range of production equipment. You will predominantly carry out preventative maintenance, however approximately 15% of your time will be spent carrying out reactive maintenance and installation work on exciting projects.

This is a great opportunity for an electrician to join an expanding business who can offer the successful candidate the opportunity to work on a variation of equipment, further training and regular overtime.

The Role:

· 100% electrical maintenance

· Working with motor control circuits, PLCs, variable speed drives

· 85% Preventative Maintenance, 15% Reactive Maintenance

· Install work when required

· Regular overtime available on Friday afternoons and Saturday

The Person:

· Qualified electrician

· Experience working in an industrial environment

Maintenance Technician

Responsibilities

• Servicing and repairing industrial cleaning equipment such as high-pressure jet, leaf blower, scrubbing machine, vacuum cleaner, battery operated cart and etc
• Inspecting and assessing the functionality of equipment
• Troubleshooting machineries breakdowns
• Conducting routine maintenance and safety checks
• Preparation and submission of maintenance reports
• Liaise with external vendors for necessary equipment repair
• Inspect and monitor quality standards of equipment / tools
• Perform asset tagging to ensure accountability of equipment
• Prepare inspection finding reports and communicate with internal staff / vendors on any faults, and follow up to ensure rectification
• Any ad-hoc assignments

Requirements

• Valid Singapore Class 3 Driving Licence
• Minimum 2 years of experience in similar capacity and relevant knowledge in electrical and mechanical.
• Good communication and organisational skills
• Basic computer and report writing skills.
• Good time management and planning skills
• Hands-On Physical work required
• Driving company lorry (manual)
• Working hours: 8am to 8pm (Monday to Saturday)

Maintenance Technician

Responsibilities

• Servicing and repairing industrial cleaning equipment such as high-pressure jet, leaf blower, scrubbing machine, vacuum cleaner, battery operated cart and etc
• Inspecting and assessing the functionality of equipment
• Troubleshooting machineries breakdowns
• Conducting routine maintenance and safety checks
• Preparation and submission of maintenance reports
• Liaise with external vendors for necessary equipment repair
• Inspect and monitor quality standards of equipment / tools
• Perform asset tagging to ensure accountability of equipment
• Prepare inspection finding reports and communicate with internal staff / vendors on any faults, and follow up to ensure rectification
• Any ad-hoc assignments

Requirements

• Valid Singapore Class 3 Driving Licence
• Minimum 2 years of experience in similar capacity and relevant knowledge in electrical and mechanical.
• Good communication and organisational skills
• Basic computer and report writing skills.
• Good time management and planning skills
• Hands-On Physical work required
• Driving company lorry (manual)
• Working hours: 8am to 8pm (Monday to Saturday)

This is an open continuous announcement. Applications will be reviewed on the established cut dates: 12/4/2024, 1/6/2025, 2/5/2025 and at the closing date (dates are subject to change). Non-Selected Applicants must update their application information to be considered for the next cut.

As a MAINTENANCE MECHANIC, you will:

• Install, modify, or repair high-pressure piping systems and equipment such as steam heating, steam generators, hot water and hydraulic systems, radiators, and vacuum pumps, condensate pumps, and circulating pumps. Plan routing, placement and pitch; determine proper valve, pressurizing regulators, and expansion joints; install braces and support to control movement and vibration, allowing for expansion and contraction.
• Fabricate, install and maintain sheet metal equipment and fixtures such as machine guards, shelves, coin stands, ventilators, chutes, bulkheads, ducts, metal roofing, flashing, and hoppers. Work involves design, layout, set up, and the utilization of a variety of equipment and hand tools such as drill press, hand braker, hand nibler, squares, and shears.
• Perform oxyacetylene, gas carbon-arc. Tig arc, and heliarc welding, brazing, soft and silver soldering, flame and arc burning and cutting to fabricate, maintain and repair a variety of items such as piping, tubing, machine parts, and structures. Weld such metals as aluminum, stainless steel, mild steel, cast iron, bronze, brass, copper and various alloys including dissimilar metals such as brass to steel, black iron to stainless steel, and galvanized steel to black iron.
• Erect, alter, repair or remove interior walls and partitions of various composition, such as wood and metal studding and bracing, sheetrock, wood and other paneling materials. Install, repair or replace wood and metal window framing, doors, door jams, baseboards, molding, transoms, and panels.

The purpose of this position is to perform minor construction and repair on existing structures involving standard measurements, specifications, instructions, and basic shop mathematics. Installs exterior and interior trim using preplanned materials, such as baseboard, and molding. Replaces broken or missing acoustical ceiling tile, broken door and window trim, window screens, stairway steps, wooden porches, door jambs, and other damaged wood components. Interprets specifications, such as work orders with sketches or easily understood blueprints and technical instructions to plan and layout work. Repairs and refinishes furniture and repairs.

Follow inspections conducted by incumbent or specific information (work orders), locates and makes repairs to plumbing that can be accomplished by installing, removing, cleaning, replacing, modifying, package, and sealing defective parts of utility, supply, gas distribution, and disposal systems such as dirty traps, sections of broken tile or pipe, and leaky drains using existing routes, openings, hangers, and levels. Caulks and seals such things as elbows, union joints, and tiles or pipes, faucets, and shower drains. Checks operation and completes needed repairs to small parts and sections of existing systems, such as water heaters, disposal units, and faucets.

Prepares wood and metal surfaces to be painted; mixes and prepares coating aerial, and applies coating materials. Prepares surfaces by scraping, wire brushing, masking, spackling, and sanding surfaces. Mixes and thins coating materials to obtain desired consistency following specific written directives. Applies coating materials, such as primers, paints, varnishes, and shellacs, using standard application techniques and ensures that the coating finish meets surface protection requirements.

Makes minor electrical repairs by replacing fixtures, switches, stove burners, electrical cords, bulbs, and fluorescent fixtures. Responsible for the maintenance and upkeep of gasoline powered equipment to ensure equipment is in good mechanical and safe operating condition. Performs routine maintenance such as oil change, minor adjustments, spark plugs cleaning and replacement on such equipment. Performs routine inspection and minor maintenance on Lodging vehicles to include oil change, battery checks, condition of brakes, filling tanks with gasoline, checking fluid levels, hoses and filters, changing fan belts, and replacing lights.

Required to move equipment, furniture, and supply items between quarters, supply room and warehouses. Drives vehicles weighing up to I0,000 pounds to various locations both on and off base. May operate a government vehicle to include light truck, sedan, golf cart, etc.

If interested in applying for this position you may preview the online application: https://apply.usastaffing.gov/ViewQuestionnaire/12620453