Total 87 engineering job vacancies in 0461 Campus Point E San Diego CA

• You will serve as a senior engineering resource for all topics involving subsystems and flight controls for the Division.
• You will establish performance standards, assess performance, counsel, evaluate, and recommend awards.
• You will maintain open communication with the FST and Competency leadership locally and nationally on technical issues to ensure timely production of high-quality engineering products and services in accord with all policies and procedures.
• You will provide recommendations and input for plans to establish a series of annual and multi-year work plans, goals, and objectives.
• You will advise and mentor subordinates on technical and administrative matters.
• You will promote team building and quality customer service goals.

Starting at $103,409 Per Year (GS 13)

1. As Project Manager for design or other engineering services, the incumbent performs administrative and technical project management.

• As Project Manager for projects performed in-house (MWR), ensures that siting and concept planning are compatible with the activity master plan. Plans and participates in conferences to decide on functional requirements for assigned projects. Identifies areas of special concern pertaining to the specific project, environmental impact, energy conservation, economic analysis, safety, physical handicap criteria, activity maintenance procedures and policies, site utility adequacy, connections and outages, etc.
• Coordinates technical and administrative requirements with local, state or other authorities when necessary, obtaining necessary approval actions. Reviews established regulations, codes, standards, schedules and priorities.
• Convenes and attends such meetings with concerned personnel and agencies as required to effectively decide on the optimum course of action. Develops or coordinates development of necessary designs, specifications and cost estimates. Performs planning, scheduling and coordination necessary to assure that the design is complete within the design budget and the allotted construction budget.
• Makes field investigations during construction involving difficult problems such as changes in design due to latent conditions and interfaces new work with existing structures and/or those under construction. Analyzes and interprets contract drawings and specifications to determine the extent of the contractor's responsibility under the provisions of the contract.
• Recommends solutions to controversial situations including those which are due to misinterpretation of contractual and engineering terms and provisions. Reviews and evaluates proposed change orders, recommending approval or disapproval. Prepares Government estimates used in negotiating cost of approved changes. Provides technical review and recommendations for the resolution for contractor claims.

2. Performs design and develops the construction drawings and specifications for civil and structural engineering systems, such as parking lots, construction or structural rehabilitation of existing buildings, support structures, playgrounds, roofing systems and other similar projects. Projects may include additions and renovations to existing structures and/or new construction. Structures typically include Childcare Center, Clubs, Food facilities, Golf Course, grounds and other athletic recreation buildings and sites.Work includes most or all of the following functions:

• Monitors construction, ensuring that all aspects of the project are constructed in accordance with contract plans, specifications and appropriate building codes.
• Provides technical liaison as necessary with respect to the specifications or statement of work to assure all work performed is within the scope of the contract. Confers with the construction contractor and design engineer to resolve problems or latent conditions that may arise during construction.
• Based on the problem or condition, prepares sketches or change drawings and specifications solving the problem or condition. Incorporates change documents into contract performance documents. Analyzes and coordinates requested design or construction changes which occur after the contract is awarded.
• Ensures that changes in costs, quantity, scope, schedules, design, or any other terms and conditions of the contract are coordinated or approved, as appropriate, Monitors the contract to assure the proper utilization of government funds.
• Brings any significant deficiencies to the attention of the Contracting Officer. Makes recommendations of corrective/preventative measures as appropriate.

3. Management and Operations Assignments. The incumbent serves as one of the staff advisors to the MVVR Site Managers and Regional Managers. Based on professional expertise, furnishes advice on the efficient utilization of the machinery, equipment, and personnel, Provides guidance for making changes as a result of reorganizations, expansions, realignments in the MWR mission, and broad instructions received from higher headquarters. Develops or selects techniques for measuring the efficiency of production activities. Serves as the technical authority and coordinates the function with other related activities, engineering functions, quality control, plant maintenance, safety, storage, etc. Resolves controversial questions resulting from these studies.

Starting at $95,000 Per Year (NF 4)

• As an Engineering Technical Lead (TL) will manage the coordination and accomplishment of the planning, scoping, development, budget development, and contract oversight.
• Projects include flood risk management, coastal protection, ecosystem restoration, dam and levee safety projects, and the deepening and improvement of ship navigation channels for larger vessels.
• Solves, advises, or evaluates complex design management issues which involve difficult or unusual planning, scheduling, negotiation, coordination, communications, and contracting during design, acquisition, and construction phases.
• Engineering disciplines including architecture; civil engineering; geotechnical engineering; coastal, hydraulic and hydrologic engineering; mechanical engineering; electrical engineering; structural engineering; and environmental engineering.
• Will have responsibilities such as funds control; resource planning; contract negotiation; contract oversight; and project scheduling.
• Works closely with the Project Manager (PM) during all phase of the design, acquisition, and works closely with the Resident Engineer during the construction phase.

Starting at $128,717 Per Year (GS 13)

• You will perform job analyses and determine most efficient method to fill vacancies and meet human resources needs for organizations serviced.
• You will prepare and review position and/or job descriptions, coordinate desk audit requests with NAVFAC Center of Expertise (COE) and assist/conduct audits.
• You will provide advisory classification services and position management support in resolving problems.
• You will provide advisory services on recruitment and placement issues.
• You will explain the recruitment process to managers and employees.
• You will provide advice and assist management and personnel in matters regarding administration of pay laws, rules and regulations.

Starting at $55,836 Per Year (GS 7-9)

• You will assist with the command's Environmental program.
• You will perform a variety of support duties, pertaining to the protection of the environment, designed to relieve the supervisor and/or others of many routine, miscellaneous matters.
• You will assist, gather, organize and evaluate environmental information (such as hazardous waste, water, air, natural and cultural resources, pollution prevention or other data) to support DoD and Navy specific guidelines.
• You will assist with routine tasks, such as inspecting storage areas to ensure compliance with Federal, State, and Navy Requirements.

Starting at $35,373 Per Year (GS 4)

• You will lead crews in troubleshooting cable systems to locate shorts, electrolysis damage, capacitance imbalance or cable breaks.
• You will lead a team as a High Voltage Electrician completing high voltage electrical inspections, repairs, and maintenance activities.
• You will maintain proper work methods, explain steps and or processes to ensure the safety of crew members and safe operations of the equipment.
• You will maintain proper work methods, explain steps and or processes to ensure the safety of crew members and safe operations of the equipment.
• You will use tools and test equipment (climbing gear, belt and harness to operate, test and repair high voltage overhead/underground lines, cross arms, transformers, switches and surface/subsurface structures).
• You will lead work in substations using tools and tests equipment to troubleshoot and maintain switchgear, circuit breakers, and control and protective devices.

Starting at $49.58 Per Hour (WL 10)

• You will Install, repair, maintain, troubleshoot, test, and load new and existing electrical lines, circuits, systems, and associated fixtures, controls, and equipment supporting industrial operations or similar complex electrical loads.
• You will plan and lay out the work, tracing hard-to-locate defects or problems and complete repairs and installations with little or no advice.
• You will work from building plans, blueprints, wiring diagrams, engineering, drawings, and electrical maintenance and repair manuals.

Starting at $32.87 Per Hour (WG 10)

• You will operate multiple types of hydraulic boon cranes to load, unload, move, and position heavy material and equipment.
• You will work from hand, radio, and other approved types of signals to position items where is there restricted maneuverability.
• You will complete operator's daily checklist to document pre and post crane inspections.
• You will use load charts to determine crane's lifting capacity in relation to the position of the boom and to compensate for variations in a crane's lifting capacity.

Starting at $32.10 Per Hour (WG 11)

• You will supervise a technical staff comprised of architects, manage their workload, evaluate work performance and provide feedback to others on their performance.
• You will evaluate work performance and provide feedback to others on their performance.
• You will plan, distribute, coordinate, and monitor work assignments of others.
• You will identify training needs of subordinates, initiate on-the-job training, recommend formal training necessary, provide mentoring and coaching, and develop an Individual Development Plan (IDP) for each subordinate employee.
• You will serve on independent technical review teams conducting quality control (QC) quality assurance (QA) on projects.
• You will provide architectural technical expertise, community management, and regional interface for design, design review, construction, and rehabilitation of a diverse range of projects within the program.
• You will serve as Regional Technical Specialist, subject matter expert, and technical advisor for all architectural aspects of the Architecture Program throughout the regional Command.
• You will provide post construction award services (PCAS), including review and approval of contractor's submittals for conformance with the requirements of the contract drawings and specifications.
• You will be responsible for the architectural design of shore installation facilities projects and coordinate the work of Architects in the accomplishment of project assignments in military facilities.

Starting at $117,776 Per Year (GS 13)

• You will follow safety practices and procedures in the operation of vehicles.
• You will interpret instructions or specifications related to bus operations, preventive maintenance, and passenger safety.
• You will load, arrange, and secure cargo into vehicle using techniques and equipment (e.g., chains, binders, straps, tie-downs) for safe transit.
• You will operate vehicles with the gross weight of more than 32,000lbs; vehicles that are oversized and/or equipped with more than one body or two braking systems.
• You will perform minor repairs or adjustments on vehicles.
• You will perform operator maintenance on all vehicles operated.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• You will be required to successfully complete a pre-appointment physical examination.
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.

Starting at $25.92 Per Hour (WG 7)

• You will apply knowledge of mobile applications such as Maximo Anywhere, Microsoft Office Suite, and other enterprise software solutions.
• You will plan, schedule, and execute projects and studies aimed at evaluating and recommend improvements, effectiveness and efficiencies of the assigned functions and processes.
• You will use data processing software (e.g., Outlook, Excel, Word, PowerPoint, or similar software) to create reports.
• You will identify program trends through data analysis and direct the implementation of corrective action plans.
• You will plan, direct, control, and administer assigned programs elements and resources in connection with the assigned areas.

Starting at $82,633 Per Year (GS 11)

• You will provide consistency and high quality documentation for planning projects for all customers in the geographic area of responsibility.
• You will provide technical direction for all services provided by the various directorates at NAVFAC SW, Assistant Regional Engineer (ARE) staff or Public Works Team with the main focus on planning-related issues.
• You will establish the project scope and criteria based on general policies and directives.
• You will approve changes to criteria or procedures when appropriate and may deviate from traditional methods in order to accomplish assigned duties.
• You will evaluate architecture and engineering construction projects to recommend and implement initiatives for improvements.
• You will compose technical reports for management providing updates on the status of master plans.
• You will develop and maintain project criteria, schedules, and budgets in conformance with project and customer requirements.

Starting at $117,776 Per Year (GS 13)

• You will manage pre- and post- award contracting for design, construction, utilities, maintenance, IT, research and development, energy, and environmental services for shore facilities of supported commands and activities.
• You will conduct higher level reviews of various contractual documents developed by subordinate contracting officers and journey level contract specialists.
• You will provide advice, training, mentoring, and guidance to other contracting professionals within the Department, Command, and other NAVFAC components on procurement regulations, policies, and procedures.
• You will plan work to be accomplished by subordinates, set and adjust short-term priorities, and prepare schedules for completion of work.

Starting at $139,176 Per Year (GS 14)

• You will receive, review, assign, log and prepare customer work requests.
• You will perform variety of procedural and clerical and basic administrative support duties designed to relieve the supervisor and/or others of many routine, miscellaneous matters of this nature.
• You will receive calls, greet visitors, and direct calls or visitors to appropriate staff person based on personal knowledge of project and ongoing operations.
• You will coordinates, organize and arrange individual requests for travel using the Defense Travel System (DTS).

Starting at $35,373 Per Year (GS 4)

Calling all Engineers : Tutor of Design & Engineering opportunity Ref: 2324/161
Hours: 37 hours per week
Salary: Up to £40,109 per annum (subject to experience and qualifications). Plus generous benefits. These include:
• 55 days annual leave per year (including bank holidays and efficiency closures)• Generous Occupational Pension Scheme • Financial support towards teacher training course fees if you do not have a recognised Level 5 teaching qualification (Cert Ed/PGCE) – worth up to £6,000 over two years
About the roleAre you working or teaching in the field of engineering, design and/or manufacturing?! Would you be interested in a rewarding role which supports the development of future engineering workforce. We are seeking to appoint a dynamic and enthusiastic individual who would relish the opportunity to share their knowledge, skills and industry experience to teach, support and develop our next generation of engineers.
This is a great opportunity to inspire our future engineers, teaching across a range of vocational engineering & manufacturing programmes and Apprenticeship Standards. Predominantly our Level 3 programmes such as our BTEC Advanced Manufacturing Engineering and our T Level Engineering Manufacturing Design and Development. The successful candidate would need engineering & manufacturing/design technology experience to deliver a range of topics from engineering materials and processes to engineering design, as well as project based teaching, supporting students to develop skills to create successful protypes and solutions. General workshop skills are an advantage, any experience with Computer Numerical Control & Manufacture (Lathe & Mill), 2D / 3D CAD (e.g. AutoCAD, Solidworks), 3D printing/additive manufacture would be of benefit, but not essential.
About the personYou may be an experienced FE trainer/tutor, or a newly qualified tutor/teacher, however we would encourage applications from those working in design, manufacturing and/or engineering industry. Experience of leading projects/programmes would also be of benefit.
You should have a minimum of HND in a relevant Engineering discipline, or/and relevant industry standard qualifications and experience. You will ideally possess a recognised teaching qualification and assessor/IQA awards, or be willing to work towards these with funding support from the College. Recent experience within a manufacturing / engineering industry would be a significant advantage.
Candidates may offer skills and experiences suitable for a proportion of role or the total 37 hours per week.
About the CollegeA college with an excellent track record for quality, we're amongst the top performers in the region. We're one of the largest providers of A Level and vocational programmes for 16 to 19 year olds in the region. We also deliver a range of T Levels, Traineeships, Apprenticeships, degree level courses, working with over 1,000 employers, helping them to meet their current and future skills needs.
We are proud of our excellent achievement rates for students at all levels, as well as our outstanding student progression into higher-level study and employment.
York College is proud to be part of a consortium of colleges and employers developing the Yorkshire and Humber Institute of Technology (IoT), designed to increase higher level technical skills for employers.
With a vibrant working environment, excellent transport links to the city centre and surrounding area, plus on-site parking, you will find York College to be fulfilling and supportive place to work. As a member of College staff you will have full use of the College facilities including free gym membership at the Athletic Suite, our brand new state of the art gym. Please check out our website: www.yorkcollege.ac.uk
Want to know more?
For an informal discussion about the role, please contact Lisa Wheeler, Head of Curriculum Engineering and Digital Technologies, on 07803 615613.
If you would like to apply for this post please submit your application as soon as possible, as applications will be reviewed as they are received.
Important Notices
Please note that we do not accept CV applications. If you are viewing this vacancy through any job board then please go to our website www.yorkcollege.ac.uk/job-vacancies and apply using our application form.
Most correspondence regarding vacancies will be sent via email, so please check your emails regularly for updates on your application. We would also advise to check your junk/spam folder as some emails may end up here depending on your mail provider settings.
We are deeply committed to diversity and inclusion and wish to have a diverse workforce. We positively welcome applicants from all under-represented groups, including minority ethnic groups and those with disabilities. We are proud to be affiliated to the Black Leadership Group (BLG).
As an employer we are committed to promoting and protecting the physical and mental health and well-being of all our staff. York College has signed up to the ‘Mindful Employer’ charter for employers who are positive about mental health. We are also a certified Disability Confident Employer. Disability Confident is a government scheme designed to encourage employers to recruit and retain disabled people and those with health conditions.
We welcome job applications from anyone who has the requisite skills, qualifications and experience. All applications are considered strictly on merit. Our aim is to appoint the best person for the job, regardless of race, gender, disability, sexual orientation, age or any other ‘protected’ characteristic. Please note also that we value the contribution of those who have served in the Armed Forces, and are signatories to the Armed Forces Covenant.