Total 8 job vacancies by Agensi Pekerjaan PERSOLKELLY Malaysia Sdn Bhd

Responsibilities:

• You are to report to Chief Design Engineer in tool design related functions.
• Responsible to execute of tool design project.
• Coordinate with engineering team and customer to resolve technical issue for tool design.
• Execute the day to day tool design operation.
• Responsible to ensure quality plans are effectively executed and responded.
• Operate the design software, equipment and hardware to meet the high quality of tool design requirements.
• Measure, report and improve design efficiencies, productivity, quality, waste and defect level in line with company targets and objectives.
• Responsible for execution to achieve capacity optimization and cost control.
• Active involvement in participating and execute improvement leading to higher quality achievement and customers satisfaction.
• Ensure there is adequate resource to efficiently run the tool designing process whilst helping the team and ensuring training and competence is evident.
• Efficient resources utilization include but not limited to manpower, machinery, equipment, and materials.
• Implement corrective and preventive measures to mitigate or avoid design operational risks.
• Ensure adherence to company system, standard operation procedures, health and safety and good manufacturing practices systems within all production processes.
• Lead and motivate subordinates to achieve company and personal goals.

Requirements:

• Academic Qualification: Preferably with Diploma / Degree in Mechanical Engineering, Tool Design with molding or tooling exposure.
• Work Experience: Minimum 3 Years of working experience in manufacturing environment especially in metal stamping, metal fabrication operation. Well verse in tool design software not limited to NX6.
• Others: Hands on experiences in managing design engineer and processes in a highly demanding manufacturing environment. Communicate effectively with good leadership.

Perks & Benefits

• Medical insurance
• Personal leave

Responsibilities:

• Troubleshoot and repair medical equipment.
• Perform scheduled maintenance according to define scope and standard operating procedures.
• Close service call with duly completed service reports.
• Foster strong customer relations and escalation at a technical level.
• Any adhoc duties assigned by superior from time to time.

Requirement:

• Bachelor Degree in Biomedical, Electronics or Mechatronics Engineering , Electrical and Electronic Engineering. 
• Ability to effectively prioritize and execute tasks in a high-pressure environment
• Good team player and independent worker with good written and  communication skills
• Excellent interpersonal and analytical skills
• Willing to work on standby mode by rotations.
• Prior experience in in technical support / field service experience handling biomedical equipment, medical devices or related medical products, is an added advantage.
• Willing to travel.
• Proactive attitude towards learning.
• Training will be provided.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave

Responsibilities:

• To maintain effective working relationship with all departments.
• To understand and master all process design basis (process description, operation parameters, in process quality, intermediate product quality, finished product quality, control strategy, HMB, PFD and P&ID) for all process / operation, plant equipment's characteristic and its engineering design specification, all finished products quality specification and application.
• To develop process block diagram which contain mass balance with Fatty Acid Composition.
• To closely monitor all process / operation performances by timely and effective data (process and quality) collection and analysis.
• To provide regular process / operation performance reports.
• To optimize and improve all process / operation performance on EHS, quality, yield, productivity, cost, operation-ability and maintainability.
• To provide technical supports to Production Department.
• To know the detail of all production upset incidents

Job Requirement:

• Minimum Bachelor Degree in Chemical Engineering
• Proactive, positive attitude, effective people skills, strong in analytical skills, project management and effective reporting / presentation.

Perks & Benefits

• Commission and bonus
• Medical insurance
• Personal development opportunities

Primary Function: 

• To develop, buy-off, implement and monitor an efficient of manufacturing jig & fixture or tools to meet the customer products requirement.

Responsibilities:

• Work primarily on fixtures for assembly, pressing, work holding, welding and special tools used in machining and sheet metal fabrication.
• Ability to work cross with other functionally team for effective manufacturing process and react to need from time to time.
• Liaise with supplier for tool fabrication and price negotiation
• Making continuous improvements to existing Jig & Fixture and Tools
• Has a good knowledge of various materials for tools application
• Provide technical assistance to production operations
• Conducts field investigations as needed to verify existing tools conditions.

Job Requirements:

• Academic Qualification: Minimum diploma in Mechanical / Manufacturing / Mechatronic / Industrial engineering or equivalent.
• Work Experience: Minimum 2 years experiences in jig & fixture and Tool Design. Preferably in metal stamping, metal fabrication.
• Knowledge in Lean Manufacturing and / or customer GD&T.
• Well skill & knowledge in Auto CAD / Solid Work.
• Positive attitude, high level of integrity, able to work with others independently. Ability to work under tight dateline.
• Conversant in English/Microsoft Excel.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave

主要功能：

• 開發、採購、實施和監控高效的製造夾具或工具，以滿足客戶的產品要求。

職責：

• 主要從事組裝、沖壓、工件夾持、焊接夾具以及機械加工和鈑金製造中使用的特殊工具的工作。
• 能夠與其他職能團隊交叉合作，實現有效的製造流程，並不時對需求做出反應。
• 與供應商聯絡以進行工具製造和價格談判
• 不斷改進現有的夾具、夾具和工具
• 對工具應用的各種材料有很好的了解
• 為生產營運提供技術援助
• 根據需要進行現場調查，以驗證現有工具的狀況。

職位要求：

• 學術資格：機械/製造/機電一體化/工業工程或同等學歷的最低文憑。
• 工作經驗： 至少 2 年夾具和工具設計經驗。最好是金屬沖壓、金屬製造。
• 精實製造和/或客戶 GD&T 方面的知識。
• 良好的 Auto CAD / Solid Work 技能和知識。
• 態度積極，高度誠信，能獨立與他人合作。能夠在緊迫的日期期限內工作。
• 精通英語/Microsoft Excel。

津貼和福利

• 佣金和獎金
• 津貼（旅費、交通費等）
• 醫療保險
• 事假

職責：

• 排除故障並修理醫療設備。
• 根據定義的範圍和標準作業程序執行定期維護。
• 關閉服務電話並及時完成服務報告。
• 培養牢固的客戶關係並在技術層面上升級。
• 上級不時指派的任何臨時職責。

要求：

• 生物醫學、電子或機電工程、電機和電子工程學士學位。
• 能夠在高壓環境下有效地確定優先順序並執行任務
• 良好的團隊合作精神和獨立工作者，具有良好的書面和溝通能力
• 優秀的人際溝通與分析能力
• 願意輪流在待機模式下工作。
• 具有處理生物醫學設備、醫療器材或相關醫療產品的技術支援/現場服務經驗的經驗是一個額外的優勢。
• 願意出差。
• 積極主動的學習態度。
• 將提供培訓。

津貼和福利

• 津貼（旅費、交通費等）
• 醫療保險
• 事假

職責：

• 您將向首席設計工程師報告工具設計相關職能。
• 負責工具設計專案的執行。
• 與工程團隊和客戶協調解決工具設計的技術問題。
• 執行日常工具設計操作。
• 負責確保品質計劃得到有效執行和回應。
• 操作設計軟體、設備和硬件，滿足高品質的工具設計要求。
• 根據公司目標測量、報告和改進設計效率、生產力、品質、浪費和缺陷水準。
• 負責執行以實現產能優化和成本控制。
• 積極參與和執行改進，從而實現更高的品質成就和客戶滿意度。
• 確保有足夠的資源來有效地運行工具設計流程，同時幫助團隊並確保培訓和能力是顯而易見的。
• 高效率的資源利用包括但不限於人力、機械、設備和材料。
• 實施糾正和預防措施，以減輕或避免設計操作風險。
• 確保所有生產流程中遵守公司製度、標準作業程序、健康與安全以及良好製造規範體系。
• 領導和激勵下屬實現公司和個人目標。

要求：

• 學術資格：最好擁有機械工程、模具設計或模具相關的文憑/學位。
• 工作經驗： 至少 3 年製造環境工作經驗，尤其是金屬沖壓、金屬製造作業。精通工具設計軟體，不限於 NX6。
• 其他：具有在高要求的製造環境中管理設計工程師和流程的實務經驗。與良好的領導者進行有效的溝通。

津貼和福利

• 醫療保險
• 事假

職責：

• 與各部門保持有效的工作關係。
• 了解和掌握所有製程/操作的所有製程設計依據（製程描述、操作參數、製程品質、中間產品品質、成品品質、控制策略、HMB、PFD和P&ID）、工廠設備的特性及其工程設計規格、所有成品品質規範及應用。
• 制定包含質量平衡和脂肪酸組成的製程框圖。
• 透過及時有效的數據（過程和品質）收集和分析來密切監控所有流程/操作績效。
• 定期提供流程/操作績效報告。
• 優化和提高EHS、品質、產量、生產率、成本、操作能力和可維護性方面的所有流程/操作績效。
• 為生產部提供技術支援。
• 了解所有生產異常事件的詳細情況

職位要求：

• 化學工程最低學士學位
• 積極主動、積極的態度、有效的人際交往能力、強大的分析能力、專案管理和有效的報告/演示能力。

津貼和福利

• 佣金和獎金
• 醫療保險
• 個人發展機會