Total 970 Transportation / Logistics job vacancies in D19 Serangoon Garden, Hougang, Sengkang, Punggol

As a GS-2185-11 Aircraft Loadmaster, you will;

Plan, organize, & direct the activities of the loadmaster section, ensuring that operational and training duties pertaining to loadmasters comply with legal and regulatory requirements and meet organizational mission. Research, interpret, analyze and apply proper guidelines, policies, regulations, etc. pertaining to aircrew function. Establish policies and procedures for accomplishment of loadmaster function. Plan & schedule work in a manner that promotes a smooth flow and even distribution. Coordinate plans and schedules with other aircrew members & organization managers as appropriate. Identify need for changes in priorities and takes action to implement such changes. Plan, schedule and assign work to be accomplished by subordinates. Balance workload, providing advice, guidance, and direction on a wide range of aircrew and administrative issues. Review organization mission, functions, and manning. Identify requirements and initiates requests for additional resources including personnel, overtime, equipment, supplies, and space to ensure success in meeting goals & objectives. Advise supervisor of significant issues & problems related to work accomplishment. Review work Accept, amend, or reject work presented by subordinates. Manage critical assessment programs such as the Management Internal Control Toolset (MICT), Manage critical assessment programs such as; Unit Self Inspections, Maintenance Standardization, Operational Readiness, Unit Compliance Inspections, and Staff Assistance Visits (SAVs). Responsible for the development and maintenance of organizational level checklists. Ensure metrics are established and monitored to assess key result areas for successful mission accomplishment including, but not limited to, items where non-compliance would affect system reliability or result in serious injury, loss of life, excessive cost, or litigation.

As required, fly as an aircrew member in unit aircraft and performs duties as flight instructor. May also perform duties as flight examiner. As a flight examiner, the incumbent administers no notice and annual evaluations to ascertain the performance of loadmasters during all phases of mission execution. Use of night vision devices, flying in mountainous terrain, during combat assault landings on unprepared runways, and accomplishing aerial delivery of cargo/personnel (airplane typical) are required. Ensure aircrew members meet or exceed qualification standards for assigned position. As a loadmaster instructor, makes determinations on issues involving passenger safety, and safety of flight matters involving weight and balance data, shipment and compatibility of various types of cargo and cargo/personnel combinations, hazardous materials in excessive quantities, special handling security cargo such as courier materials, and registered mail. Develop and certify cargo load plans as well as evacuation procedures for aircrew and passengers. Maintain oversight of loading and unloading of aircraft, ensuring that all required documentation is completed.

Aircrew Standardization/Evaluation Program: Manage the Loadmaster Standardization evaluation program, which is specifically designed to maintain guidance per AFI and other applicable instructions on evaluation testing, maintaining Flight Evaluation Folders, set up no notice evaluations, attend Standardization Evaluation Review Boards (that determine evaluation, testing, new LM upgrades and trending analysis) and perform LM annual evaluations to include ground evaluation. The Standardization and Evaluation program is for the Wing Commander to visually assess through periodic reviews the squadron's procedures and practices to assure adequacy and compliance to local and higher-level directives.

Manage a list of trained Loadmasters to meet the need for the Joint Airdrop Inspector (JAI) Program. The supervisor will ensure that only the most qualified individual is selected to be JAI certified for the program from the list of mission qualified loadmasters. Choose who will be the unit representative and subject matter expert on all inter-service aerial delivery review panels and malfunction on analysis board meetings. Attend Standardization and Evaluation boards to select candidates that will be trained to be JAI certified.

Manage Flight Crew Information File (FCIF). Ensure pertinent and time sensitive information is disseminated in a timely manner. Instate controls to ensure loadmasters constantly monitor and review information delivered through the FCIF program. Manage all paper and electronic media used to construct FCIF library (to include GTIMS, PEX, signature cards, etc.) and constantly evaluates effectiveness of the chosen format. Coordinate with Wing, MAJCOM, and Civilian agencies to obtain most current and accurate information to include in FCIF publications.

Manage trained Loadmasters to meet the needs for the following operations.

Perform other duties as assigned.

Do you have a Class 4 Driver's License and a passion for safe and reliable deliveries?

We're looking for a motivated and responsible Class 4 Driver to join our team! Our warehouse is conveniently located at Pandan Loop (Opposite Blk 518 West Coast Road HDB Flat).

What you'll be doing:

• Pick and pack cargo for delivery
• Load cargo efficiently into delivery vehicles
• Deliver cargo safely and on time to designated port locations
• Maintain a positive and professional attitude

What we offer:

• Competitive salary and benefits package (details upon application)
• Stable working hours: 8.30 am to 5.30 pm, Monday to Saturday (6 days a week)
• Opportunity to be part of a growing team

Requirements:

• Valid Class 4 Driver's License
• Clean driving record
• Reliable and punctual
• Good communication and interpersonal skills
• Ability to work independently and as part of a team
• Physically fit for the demands of the job (lifting, carrying)

Interested? We are!

Contact Catherine via WhatsApp at +65 9244 0070

Don't miss out on this exciting opportunity! We look forward to hearing from you!

Job Description

Class 4 DRIVER

Transporting warehouse to site

Perform daily routine checks and maintain the general cleanliness.

Drive in a safe manner at all time and adhering to traffic rules & regulations stated in the Road Traffic

Ad-hoc duties

Requirements:

Class 4 License

Proven working experience & Good Driving Record

Familiar with Singapore route

Roles & Responsibilities

Deliver and unload products to ongoing project's premises

Ensure proper documentation during delivery and collection

Attend to other ad hoc duties as assigned by supervisor

· Possess Class 4 driving licence.

· Able to lift heavy loads and assist with delivery.

· 6 days work week.

· Minimum 2yrs work experience

· Well verse with roads in Singapore. Responsible and safe driver.

· Able to start immediately

We are hiring wholesale fruit and vegetables LORRY DRIVER. If you can meet the following requirements, we welcome you to join us:

1) Have a valid singapore class 3 driving license with 5 years driving experience

2) knowledge in wholesales for fruits industy

3) must be a team players and able to work in shift

4) NEED TO WORK IN NIGHT SHIFT

1. JOB DESCRIPTION

Job Title

Driver

Occupation

LORRY DRIVER

Job Description & Requirements

JOB DESCRIPTION

• Pick up / drop the workers and collection of materials
• Any ad-hoc duties as when required

REQUIREMENT

• Knowledge in the electrical component is an advantage
• Valid Singapore Driving license.
• Able to start work immediately

About Us

Green Link Digital Bank is Singapore's inaugural Wholesale Digital Bank with core competency in Supply Chain Finance, helping SMEs embrace digitalization and grow their business by fulfilling their banking needs and bridging their funding gap.

About the team

In 2022, trade volume in Singapore reached 1.4 billion across various industries, including commodities, manufactured goods, and food. SMEs within this ecosystem often face high financing costs and limited options. Our Digital trade and supply chain finance team plays a crucial role in supporting businesses within this ecosystem by offering a wide range of financing products.

The team comprises subject matter experts in Sales, Sales Implementation and Product, collectively responsible for driving growth for GLDB through financing the trade flow within the supply chain ecosystem.

About the role

We are looking for a dynamic and motivated Relationship Manager to join our growing team. As a Relationship Manager, you will be responsible for identifying and pursuing new business opportunities, developing, and maintaining strategic partnerships, and driving revenue growth for our company. You will work closely with the Credit, Product and Sales Implementation teams to ensure a smooth end-to-end deal process from client on-boarding to implementation.

What will you be doing?

• Independently source client leads with financing requirements. Develop and execute effective sales strategies and proposals to convert leads into bank’s customers and achieve sales targets.
• Build and maintain long-term relationships with key decision-makers and influencers across various industries and sectors. Support clients' CFOs/Treasurers in their strategies and implementation, influencing their decisions regarding financing, funding, and capital deployment.
• Enable clients to adopt GLDB's Supply Chain Finance and trade products. Negotiate and complete financing arrangement with clients and partners while in compliance with the bank’s policies and standards.
• Work with Credit to evaluate the creditworthiness of the customer and conduct timely credit reviews and identify early warning signs of credit deterioration.
• Drive healthy credit facility utilization and actively cross-sell the bank's products and services.
• Collaborate with internal teams such as credit, product, and operations to provide feedback and insights on customer needs, market trends, and business opportunities.
• Monitor and report on the performance and progress of sales activities.

Who do we need?

• Self-motivated, proactive, and results-oriented, with the ability to work independently and as part of a team.
• Sourcing with strong network in local (Singapore) and ASEAN markets.
• Preferably >3 years of work experience in B2B sales within a financial institution or have experience of management in social organization e.g., business association.
• Knowledge and experience in Trade Finance especially in open account sales, credit evaluation and assessment and KYC requirements.
• Excellent verbal and written interpersonal and communications skills.

Responsibilities

• Deliver, set up and tear down catering set ups in a timely and organized manner
• Carry heavy loads and loading/unloading of food & catering equipment into delivery truck
• Conduct inspections of vehicle before departing to deliver goods
• Ensure delivery truck in good condition and cleanliness
• Any other duties and tasks in the area assigned by the manager or supervisor

Requirements

• 2 years of delivery experience
• Must have Class 3 license
• Candidates with Class 4 Driving Licence is an added advantage
• Familiar with Singapore roads
• Able to read and write simple English
• Ready to work varied shifts, including weekends and holidays

Location: Located in the West (Pandan Loop)

Interested candidates are invited to apply online with a comprehensive resume, via the APPLY NOW button below.

We regret that only shortlisted candidates will be notified.

Thank you for applying.

Job Responsibilities

- Daily deliveries collection from customers' warehouse, deliver to local sites & shipyards

- Jurong Port terminals (Marina South Wharves & Penjuru) for loadings / offland collections

- PSA supply within Pasir Panjang, Brani, Tanjong Pagar & Tuas Megaport

- Any other Adhoc assignments

Job Requirements

- Singaporeans And PR

- Possess Class 4 driving license

- Prefer familiar with Singapore roads to daily deliveries & terminal loadings (Training will be provided)

- Forklift license is added advantage (Non Vital, Courses will be arranged)

- Able to speak English & write basic English for communications purpose & checking of DO

- Willing to do overtime if necessary

- 5.5 working days per week

-Contact -Mr Gabriel +65 9691 3874 for more details

Responsibilities:

• Arrange stocks and handle stock inventory from time to time
• Packing of stocks for delivery
• General cleanliness of warehouse & maintenance of company van
• Assist in delivery/collection of goods
• Any other ad-hoc tasks assigned

5.5 days work week. Off days negotiable.

Location: Central

• Loading, transporting, and delivering items to clients or businesses in a safe, timely manner.
• Reviewing orders before and after delivery to ensure that orders are complete, the charges are correct, and the customer is satisfied.
• Providing excellent customer service, answering questions, and handling complaints from clients.
• Accepting payments for delivered items.
• Providing excellent customer service, answering questions, and handling complaints from clients.
• Adhering to assigned routes and following time schedules.
• Abiding by all transportation laws and maintaining a safe driving record.
• Preparing reports and other documents relating to deliveries.
• Operating equipment and machines, such as cars, trucks, forklifts, etc.

As an Aircraft Engine Mechanic, WG-8602-10, you will:

• Remove, install, certify, repair, modify, overhaul, and install turboprop engines, reduction gear boxes, turbine modules, compressor modules, auxiliary power units, propellers and related propeller components as required. Perform maintenance on all propulsion systems including troubleshooting and diagnosing defects, certifying, conducting bench checks, performing in-shop and on-equipment repairs and overhaul. Diagnose malfunctions using computerized test equipment, schematic diagrams, technical publications and perform the appropriate repair according to the test results and analysis. Determine the extent of disassembly necessary to repair, overhaul, replace and certify all engine, propeller and auxiliary power unit parts. Clean and inspect engine and propeller component parts such as turbines, gearboxes, blades, gears, bearings, etc. Assemble engines, propellers and auxiliary power units, adhering to prescribed procedures, torque values, safety methods and clearances. Troubleshoot propellers using electric and hydraulic test stands to check for proper operation and evidence of oil leakage. Operationally check engines and propeller assemblies and auxiliary power units, by using the engine test cell facility to meet all full power run checks on the engine and propeller assemblies and auxiliary power units.
• Modify engines, propellers, auxiliary power units, and components in accordance with Time Compliance Technical Orders (TCTO) directives; remove and install engine quick change kits; prepare engines for installation and install engine and propeller assemblies on aircraft. Evaluate technical problems of repair, overhaul, modification and installation of aircraft propulsion systems. Solve all types of maintenance problems and perform bench checks and test engine and propeller assemblies for serviceability.
• Perform operational checks of installed propellers, engines, auxiliary power units and sub-systems during aircraft maintenance ground runs in accordance with approved checklists. Employ test equipment such as computer borescope, fuel pressure gauges, air pressure gauges, and alignment fixtures. Utilize special tools and precision measuring equipment, high-pressure hydraulic test equipment, and electronic test equipment.
• Perform isochronal and special evaluations on engines, propellers and auxiliary power units. Interpret certification findings and determine adequacy of corrective action. Certify installed and repaired engines for compliance with technical publications. Perform fixed and mobile test stand functions (which may include maintenance of engine test cell facility); install special test equipment; perform pre-operational and post operational checks. Operate engines and propellers and record test data. Operate, certify, and maintain computerized engine test/trim automated systems (ETTAS) on the engine test cell. Evaluate, identify and correct problems on propeller and engine components causing vibration or impending failure using the ETTAS system, and vibration analyzer. Evaluate engine and propeller performance by computing engine torque and specific fuel consumption. Monitor engine RPM and turbine inlet temperatures. Evaluate engine and propeller performance and accept or reject the individual components. Remove engine and propeller from test stand and prepare units for aircraft installation or storage. Accomplish operator maintenance on the aircraft and engine sound suppressor facility, test stands and various pieces of ground equipment, including the auxiliary power unit test cell. Perform dynamic propeller balancing and test the propeller integrated synchophasing. Test variable potentiometers, servo-motors, indicators and aircraft wiring.
• Perform aircraft full power runs and complete engine and propeller efficiency checks. Clear Red X symbol documentation on engine and propeller related components. Prepare man-hour data collection and required forms for input into the Core Automated Maintenance System (CAMS) or the G081 (AFI 22-2101, CAMS for Mobility). Review and assist in maintaining Technical Orders (TOs) and other technical publications and directives pertinent to the element. Maintain bench stock, parts, and equipment. Assist the material control function in identifying part numbers and stock numbers for processing and controlling of repair cycle assets. Provide on-the-job training for assigned personnel. Plan and conduct formal classes of instruction in techniques of repair and maintenance of aircraft engine, propeller, auxiliary power unit, and related equipment and in the use of diagrams, blueprints, wiring schematics and technical publications. Evaluate effectiveness of training by observation and through written and oral examinations. Advise supervisor of the experience and skill levels of assigned personnel. Maintain training documentation.
• Perform other duties as assigned.

Motor East Pte Ltd is a premier automotive dealership specializing in pre-owned vehicles and new BYD electric vehicles (EVs). We are committed to delivering top-notch service, innovative solutions, and sustainable mobility options for our customers. We are seeking an experienced General Manager to lead our team and drive the success of our dealership across all functions.

You will be responsible for overseeing all aspects of the operations, including Sales, Marketing, After-Sales, and Admin functions to ensure all departments operate smoothly and meet performance targets. You must implement effective strategies, ensure high customer satisfaction levels, and lead the team to achieve financial and operational goals.

Job Responsibilities:

• Implement policies and procedures to ensure compliance with industry regulations and company standards.
• Develop and execute sales strategies to achieve sales targets and increase market share.
• Provide training, support, and motivation to the team to enhance their skills and performance.
• Address and resolve customer issues or complaints promptly and effectively.
• Implement initiatives to improve customer satisfaction and loyalty.
• Develop and manage budget, sales forecasts, operating expenses, and profitability.
• Analyze and identify trends, opportunities, and areas for improvement.
• Implement cost control measures and optimize resource allocation.
• Oversee inventory management, including vehicle/parts ordering, stocking, and turnover.
• Manage vehicle pricing strategies and promotions to maximize profitability.
• Conduct regular performance evaluations and provide constructive feedback.
• Foster a positive work environment that encourages teamwork and professional development.
• Develop and implement marketing strategies to promote our company and attract new customers.

Job Requirements:

• Bachelor’s degree in business administration, MBA or equivalent.
• Proven experience in a managerial role within an automotive dealership or a similar industry.
• Minimum 10 years of automotive sales and service operations experience.
• Excellent leadership, communication, and interpersonal skills.
• Proficiency in dealership management software and tools.
• Ability to drive business performance.

Summary of Role:
The candidate in this role is responsible for planning the supply of spare/maintenance/consumable parts to maintain optimum inventory levels (consumables, spares, etc.) and ensure the efficient running of the center. His other roles are being ISO certified and working on End Users Certifications (EUC).

Essential Responsibilities include:

• Plan and schedule Spare parts requirements based on demand plan/material requirement requests from Fabs.
• Regularly review inventory levels for specific categorization of materials.
• Regular monitoring of critical materials to ensure uninterrupted manufacturing.
• Coordinate with warehouse/logistics to ensure accurate inventory levels and stock availability.
• Publish essential spare parts metrics/KPIs to management on a timely basis.
• Derive the material requirement plan based on the master production schedule to procure and source.
• Good Knowledge of Inventory management.
• Oversee the department R&M/Chemicals, etc. stores – upkeep with house-keepings, periodic cycle counts.
• Maintain the inventory database, ensuring timely and accurate recordings.
• In charge of day-in-day-out logistics operations.
• Coordinate with and on the movement of materials.
• Must work closely with operation teams on the center's logistic needs.
• Ensure to adhere to zero safety requirements.
• Work on continuous improvement program in logistics operations.
• Ability to work in a multi-task environment.
• Providing day-to-day operations in FAB production material planning, inventory management, and procurement.
• Planned and monitored production schedule in the high-mix, low-volume environment (HMLV).
• Collaborate across departments in the planning process to plan and purchase materials requirements and meet the production plan effectively.
• Follow through with the orders from the start till delivery and ensure that goods are delivered on time.
• Ability to work in a multi-task environment.

Other Responsibilities:

• Perform all activities safely and responsibly and support all Environmental, Health, Safety & Security (EHS) requirements and programs.
• Support ISO certification and across suppliers' EUC requirements
• Support internal audit program by conducting ISO9001/TS16949 audits, gap analysis, and corrective action implementation
• Research best practices and conduct benchmarking related to QMS processes, methods, and tools
• Based upon the overall Quality System performance, identify critical systems or processes where quality improvements are required, initiate projects or activities to analyze, evaluate and propose solutions to address the problem and improve performance

Required Qualifications:

• Minimum of 5 years of professional experience in procurement, consulting, program management, and supply chain & inventory
• Direct experience in pricing and contract negotiations, supplier relationship management, business strategy, contract manufacturing/outsourcing, and continuous process improvement
• Communicate complex information clearly and concisely.
• Develop and maintain collaborative business relationships with stakeholders and align ISO/EUC requirements for the program.
• Interact with all levels of the organization.
• Perform in a very fast-paced environment.

Summary of Role:
The candidate in this role is responsible for planning the supply of spare/maintenance/consumable parts to maintain optimum inventory levels (consumables, spares, etc.) and ensure the efficient running of the center. His other roles are being ISO certified and working on End Users Certifications (EUC).

Essential Responsibilities include:

• Plan and schedule Spare parts requirements based on demand plan/material requirement requests from Fabs.
• Regularly review inventory levels for specific categorization of materials.
• Regular monitoring of critical materials to ensure uninterrupted manufacturing.
• Coordinate with warehouse/logistics to ensure accurate inventory levels and stock availability.
• Publish essential spare parts metrics/KPIs to management on a timely basis.
• Derive the material requirement plan based on the master production schedule to procure and source.
• Good Knowledge of Inventory management.
• Oversee the department R&M/Chemicals, etc. stores – upkeep with house-keepings, periodic cycle counts.
• Maintain the inventory database, ensuring timely and accurate recordings.
• In charge of day-in-day-out logistics operations.
• Coordinate with and on the movement of materials.
• Must work closely with operation teams on the center's logistic needs.
• Ensure to adhere to zero safety requirements.
• Work on continuous improvement program in logistics operations.
• Ability to work in a multi-task environment.
• Providing day-to-day operations in FAB production material planning, inventory management, and procurement.
• Planned and monitored production schedule in the high-mix, low-volume environment (HMLV).
• Collaborate across departments in the planning process to plan and purchase materials requirements and meet the production plan effectively.
• Follow through with the orders from the start till delivery and ensure that goods are delivered on time.
• Ability to work in a multi-task environment.

Other Responsibilities:

• Perform all activities safely and responsibly and support all Environmental, Health, Safety & Security (EHS) requirements and programs.
• Support ISO certification and across suppliers' EUC requirements
• Support internal audit program by conducting ISO9001/TS16949 audits, gap analysis, and corrective action implementation
• Research best practices and conduct benchmarking related to QMS processes, methods, and tools
• Based upon the overall Quality System performance, identify critical systems or processes where quality improvements are required, initiate projects or activities to analyze, evaluate and propose solutions to address the problem and improve performance

Required Qualifications:

• Minimum of 5 years of professional experience in procurement, consulting, program management, and supply chain & inventory
• Direct experience in pricing and contract negotiations, supplier relationship management, business strategy, contract manufacturing/outsourcing, and continuous process improvement
• Communicate complex information clearly and concisely.
• Develop and maintain collaborative business relationships with stakeholders and align ISO/EUC requirements for the program.
• Interact with all levels of the organization.
• Perform in a very fast-paced environment.

• To drive and truck waste from different premises
• Able to follow given schedule
• Familiar with Singapore roads or able to navigate with GPS
• On-the-job training will be provided

Job Requirements

• Possess Class 4/5 Driving License
• Physically and mentally fit
• Relevant experience in similar industry would be an advantage