Total 70 Quality Assurance / Control job vacancies in MORAS NO. 850 ACACIAS CIUDAD DE MEXICO

Supervises a staff of Air Traffic Control Specialists that is responsible for carrying out air traffic control assignments within a geographic area.

Plans and assigns work to be accomplished by subordinate employees. Sets work priorities and schedules. Approves leave; gives advice, counsel, and instruction to employees on both work and administrative matters. Evaluates performance of employees and recommends performance ratings. Hears and resolves complaints from employees and refers group grievances and more serious unresolved complaints to a higher-level manager. Identifies and arranges for developmental and other training needs of employees. Finds ways to improve production or increase the quality of the work directed. Adjusts staffing levels and work procedures to accommodate resource decisions made at higher levels. Recommends goals and objectives for the area and tracks accomplishments.

Communicates and reinforces diversity and EEO policies and programs in all areas of responsibility, including selections, training, and transfers. Supports and participates in the labor management partnership process and fosters a work environment where all employees are treated in a fair and equitable manner.

The Operations Supervisor reports to the Operations Manager. Performance is evaluated upon the effectiveness with which assigned program objectives are achieved.

This is a career ladder progression position; the duties described below are at the GS-11 level. If selected at a grade below GS-11, the incumbent will serve in a developmental capacity, wherein the work is less complex in nature and the supervisor, or a senior level employee provides specific instruction and guidance. At the GS-11 grade level, the incumbent:

• Independently conducts a wide variety of onsite safety and health inspections and investigations of mining operations as applicable, mills, preparation plants and related facilities.
• Prepares written reports of inspections and investigations, issuing citations and orders for violations found during examinations.
• Promotes safety and health among mine operators and workers by directing and participating in safety and health training programs, meetings, demonstrations, mine rescue competitions, and related activities.
• Provides technical advice and guidance to mine operators to help them solve problems and comply with mine safety and health requirements.
• Assists mine operators in the planning of modifications to improve and/or correct deficiencies in the operation such as selecting and installing new equipment and changing materials or methods.
• Promotes safety and health among mine operators and workers by directing and participating in safety and health training programs, meetings, demonstrations, mine rescue competitions, and related activities.
• Serves as a MSHA representative and information source on mine safety and health.
• Testifies at judicial hearings regarding notices of violations and orders of withdrawal.

Work Environment: The incumbent inspects and/or investigates both surface and underground mining operations as applicable, which is a very hazardous and stressful work environment surrounded by a high risk of exposure to potentially dangerous situations. In addition to the characteristically dark, wet, and cramped environment, underground mines contain noxious gases and fumes, and the danger of potentially explosive dust or gases, electrical fires, roof falls, and exposure to radiation.

The primary purpose of this position is: To provide visual flight rules (VFR) air traffic control services to aircraft operating in the vicinity of an airport or on the controlled movement area of the airfield, providing for the safe, orderly, and expeditious air traffic flow.

• Controls military and civilian aircraft under visual flight rules (VFR) in a control tower environment
• Observes and reports airport advisories, critical weather information, and equipment outages
• Provides instruction and assistance to air traffic control personnel
• Maintains certification requirements

The POI receives administrative direction from management in terms of broadly defined missions or functions. The POI, mostly independently plans, designs, and carries out programs, projects, studies, or other work. The APO provides policy assistance to field level Aviation Safety Inspectors (ASIs) on difficult or complex policy interpretations. The work is normally accepted without change. Completed work may be reviewed for adherence to FAA policy and for assurance that project requirements have been fulfilled.

ASIs at the FG-13 level issue certificates to and monitor (1) a large and complex aviation organization or (2)a number of smaller organizations that, together, are comparable in complexity to one large one. They are the primary contact point with the aviation organization(s). They may decide on issuance of the original certificates. They evaluate and decide upon proposals to change the authorized programs of the organizations. They continuously monitor the activities of organizations to determine whether they are following their authorized program, Federal regulations, and good safety practices.

FG-13 assignments are characterized by one or more of the following:

1.Multiengine turboprop, turbojet, or rotorcraft helicopter aircraft;

2. A variety of flight operations with diverse types of aircraft which may include turbine powered aircraft and unmanned aircraft; or

3. Novel and complex aviation operations.

FG-13 employees plan and conduct their assignments with substantial technical independence. They receive administrative and policy guidance from their supervisors and policy makers. They also obtain technical advice from higher-level inspectors who are experts who have overall program responsibility. They independently plan and carry out a work program to meet the needs and monitor the activities of the organizations for which they have certification responsibility. The scope and complexity of the work program may be such as to require the occasional assistance of other employees to conduct inspections and evaluate operations.

The POI applies a mastery knowledge level of the appropriate specialization and a broad knowledge of the
line of business mission and goals to assigned programs and areas of responsibility.

The POI plans and directs the use of time and resources to accomplish organizational objectives. He or she defines, organizes, and uses resources to accomplish work activities within established schedules, analyzes program requirements and accomplishments, and makes or directs adjustments as necessary to address organizational needs.

Guidelines and precedents are frequently inadequate for dealing with novel or complex operations. FG-13 employees understand and apply the basic principles of aviation safety and interpret the intent of the regulations.

At FG-13, contacts are frequently with owners and top managers of aviation corporations and involve negotiating and resolving the full range of issues and problems that confront large aviation organizations. Occasionally issues are controversial, arousing considerable public interest.

ASIs at the FG-13 level participate extensively in the certification inspection and surveillance of highly complex air carrier operations where principal program responsibility is vested in an aviation safety inspector of higher grade. These FG-13 employees have broad authority to negotiate with carrier management and make technical determinations within the coverage of approved specifications and policy manuals.

The POI provides guidance to field level staff to solve difficult technical issues. Resolves all but unique problems with the intervention of management or a technical specialist. Develop plans, techniques, and policies to address current and anticipated problems and issues. Works with management to solve problems.

Contacts are internal and external to the agency. The inspector is required to maintain an FAA second class medical.

Performs other duties as assigned.

Kualifiksii Kebutuhan Staff Document Control-QC:

- Laki-laki, usia maksimal 35 tahun

- Pendidikan minimal SLTA sederajat

- Bersedia bekerja full time senin-kamis pukul 07:20 s/d 16:30 dan jum'at 07:20 s/d 17:00, sabtu minggu hari libur

- Memiliki pengalaman min 1 tahun di bidang yang sama

- Mengerti prosedur audit internal dan external ISO 9001, ISO 14001, IATF 16949 dan Sertifikasi perusahaan lainnya.

- Sudah memiliki sertifikasi ISO 9001, ISO 14001, IATF 16949 dan ISO lainnya.

- Mahir dalam Document Management System dan Software seperti Microsoft Word, Excel, PowerPoint

- Memiliki kemampuan analisa yang baik, detail, teliti dan terbiasa bekerja secara individu maupun team

- Bersedia ditempatkan di Kawasan GIIC Blok AA Kota Deltamas-Cikarang Pusat

• S1 Industrial Engineering, S1 Industrial Management preferred
• HSE experience, quality control management, Be able to provide problem solving external claims
• Be able to analyze data on the causes of increase and decrease in production results
• Audit Compliance, ISO audit experience preferred
• Communicative, dynamic and challenging
• Max 35 Year

• Menetapkan standar kualitas yang harus dipenuhi oleh suatu produk.
• Melaksanakan inspeksi terhadap kualitas bahan baku, produk setengah jadi, dan produk akhir.
• Menyusun laporan hasil inspeksi kualitas.
• Melakukan tindakan perbaikan jika ditemukan ketidaksesuaian kualitas.
• Memastikan produk yang dihasilkan memenuhi standar yang telah ditentukan.
• Mampu membuat laporan harian untuk produk yang ditolak atau tidak memenuhi standar.
• Memberikan verifikasi terhadap bagaimana kualitas produk, kemudian diserahkan kepada tim produksi.
• Menyelidiki keluhan konsumen jika terdapat masalah ketidaksesuaian pada produknya.

This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The purpose of the position is to serve as an inspector of surface maintenance equipment to ensure that physical and operating characteristics are within acceptable standards and specifications. Duties involve complex inspection work that requires a wide variety of inspection processes and techniques. May assist higher graded inspectors, as required.

• Inspects a large variety of heavy-duty mobile equipment (i.e., combat, tactical, etc.) and automotive vehicles (i.e., attack tanks, large cranes, tank retrievers, fire trucks, bridge transporters, armored vehicle launched bridges, bulldozers, road graders, crawler tractors, power shovels, self propelled earth compacting equipment, self propelled artillery, etc.). May also inspect heavy artillery, small arms, powered support and other equipment or components of equal or lesser complexity. May assist higher-graded inspectors to perform inspections on equipment repairs.
• Inspects complex, interrelated mechanical, hydraulic, pneumatic, electronic and electrical systems, equipment and their components while in operation or in a standby condition. Inspects and performs tests to braking, steering, and differential systems, which are mechanically integrated with the transmission; to large engines, which directly power multiple hydraulic and pneumatic systems; to intricate fuel injection systems; to turret stabilization systems; and to other systems combined in a single, complex mechanical assembly. Uses specially designed testing methods and test equipment such as computerized test sets, precision gauges, electronic sensors, injector test stands, engine scopes, etc., to assure that tolerance and safety factors have been met.
• Inspects equipment to determine repairs needed. Utilizes established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s). Considers a variety of factors such as cost and availability of parts, man-hours, and impact of time constraints on the mission to assess whether repair is economical. Recommends to a higher echelon to condemn equipment when the repair costs exceed the established MEL. Prepares lists of needed repairs, parts, and man-hours authorized. Performs in-process inspections to assure that equipment is being repaired in accordance with pertinent requirements. Performs final inspection, certifying that equipment is in satisfactory operating condition, or rejects the work and returns the equipment to the repair shop with specific reports prescribing additional repairs.
• Serves as inspector on Command Maintenance Evaluation Teams (COMET) and/or as a member of Maintenance Assistance and Instruction Teams (MAIT).
• Performs other duties as assigned.

This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The purpose of the position is to serve as an inspector of surface maintenance equipment to ensure that physical and operating characteristics are within acceptable standards and specifications. Duties involve complex inspection work that requires a wide variety of inspection processes and techniques. May assist higher graded inspectors, as required.

• Inspects a large variety of heavy-duty mobile equipment (i.e., combat, tactical, etc.) and automotive vehicles (i.e., attack tanks, large cranes, tank retrievers, fire trucks, bridge transporters, armored vehicle launched bridges, bulldozers, road graders, crawler tractors, power shovels, self propelled earth compacting equipment, self propelled artillery, etc.). May also inspect heavy artillery, small arms, powered support and other equipment or components of equal or lesser complexity. May assist higher-graded inspectors to perform inspections on equipment repairs.
• Inspects complex, interrelated mechanical, hydraulic, pneumatic, electronic and electrical systems, equipment and their components while in operation or in a standby condition. Inspects and performs tests to braking, steering, and differential systems, which are mechanically integrated with the transmission; to large engines, which directly power multiple hydraulic and pneumatic systems; to intricate fuel injection systems; to turret stabilization systems; and to other systems combined in a single, complex mechanical assembly. Uses specially designed testing methods and test equipment such as computerized test sets, precision gauges, electronic sensors, injector test stands, engine scopes, etc., to assure that tolerance and safety factors have been met.
• Inspects equipment to determine repairs needed. Utilizes established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s). Considers a variety of factors such as cost and availability of parts, man-hours, and impact of time constraints on the mission to assess whether repair is economical. Recommends to a higher echelon to condemn equipment when the repair costs exceed the established MEL. Prepares lists of needed repairs, parts, and man-hours authorized. Performs in-process inspections to assure that equipment is being repaired in accordance with pertinent requirements. Performs final inspection, certifying that equipment is in satisfactory operating condition, or rejects the work and returns the equipment to the repair shop with specific reports prescribing additional repairs.
• Serves as inspector on Command Maintenance Evaluation Teams (COMET) and/or as a member of Maintenance Assistance and Instruction Teams (MAIT).
• Performs other duties as assigned.

• pengumpulan sampel beton
• pengujian kekuatan tekan
• analisis komposisi material beton.

Responsibilities :

1. Recommend adjustments to assembly or production processes.
2. Ensure that products are checked according to standards and report to the direct superior if any product discrepancies are found.
3. Inspect, test, or measure manufactured materials or products. Accept or reject finished goods.
4. Inspect product samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and checking functionality.
5. Check incoming and outgoing goods. Day-to-day inspection of incoming, processed, and outgoing products.
6. Remove all products and materials that fail to meet specifications. Determine the cause of product defects and rework.
7. Check that assembly or production lines comply with standard procedures. Comply with legal requirements.
8. Review blueprints and specifications to compare to manufactured items.
9. Record inspection results by completing reports, summarizing rework and waste, and entering data into a quality database.
10. Report inspection results (incoming, Process, and Outgoing) via WA and Checksheet on the same day.
11. Monitor the safety of equipment use and discard any that do not meet requirements.
12. Assists in the development of test methods and inspection plans.
13. Keeps measurement equipment operating accurately by following calibration requirements and calling for repairs
14. Participate in creating IK and OPL for critical products and critical processes.

Kualifikasi :

-Pria/Wanita

-Usia Maksimal 30 Tahun

-Memiliki Pengalaman 2 Tahun Sebagai Internal Auditor Training/Relevan

-Mengerti ISO

-Diutamakan Memiliki Sertifikat ISO Terakreditasi Dari Lembaga Pelatihan

-Dapat Bergabung Secepatnya

• Memastikan kualitas barang produksi sesuai standar perusahaan.
• Merekomendasikan pengolahan ulang produk-produk yang memiliki kualitas rendah.
• Memastikan dokumentasi inspeksi dan tes produk perusahaan.
• Bertanggung jawab terhadap pembukuan personal QC.

Quality Staff (Quality Assurance/Quality Control) 

Mendukung Head of Quality dalam melakukan pengawasan dan tanggung jawab untuk memonitor Quality Department Performance: Penyusunan produk defect termasuk laporan tindakan perbaikan/pencegahan kepada Pelanggan, penyempurnaan rencana sistem Quality Control/ Quality Assurance untuk menjamin kepuasan Pelanggan melalui kualitas produk, Klaim Pelanggan, menindaklanjuti dan berkoordinasi untuk penolakan dari inspeksi pengiriman, penanganan Kontrol Pemasok, dll 

Tugas Pekerjaan:

• Mempersiapkan Audit Eksternal/Internal (Audit ISO/Audit Pelanggan/Audit Perusahaan Grup)
• Melakukan verifikasi klaim pelanggan barang dikembalikan, menyediakan & membantu produksi dalam Kualitas Produk
• Memantau umpan balik kualitas produk bersama dengan tim produksi untuk menjaga kualitasnya
• Memantau dan memverifikasi keluhan pelanggan untuk menganalisis akar penyebab peningkatan kualitas
• Melakukan uji coba untuk sampel baru atau pemasok baru untuk memenuhi spesifikasi kualitas
• Mengembangkan SOP, WI untuk peningkatan proses terkait kualitas dan pengetahuan standar untuk produk baru
• Mengembangkan dan menetapkan spesifikasi kualitas untuk produk
• Mengawasi kualitas lini produksi.
• Menganalisis masalah kualitas yang ditemukan di lapangan.
• Berkoordinasi dengan departemen terkait mengenai masalah kualitas yang ada.
• Melaksanakan dan memantau hasil keputusan terhadap kualitas hasil produksi
• Buat rencana aksi untuk menghilangkan masalah – PICA (Continual Improvement)
• Menyiapkan laporan dan menandatangani dokumen sesuai prosedur yang ada
• Membuat laporan kualitas mingguan/bulanan

Persyaratan:

• Kandidat harus memiliki setidaknya Gelar Sarjana di Teknik Metalurgi, Teknik Industri, Teknik Mesin atau terkait dari universitas terkemuka.
• Setidaknya 3 Tahun pengalaman kerja di bidang terkait diperlukan untuk posisi ini.
• Memiliki keahlian di bidang teknik mesin terutama dalam sistem otomasi, desain bagian/mekanisme bergerak kecil, robotika presisi tinggi, proses manufaktur, dan mekatronik.
• Akurat, perhatian terhadap detail, bijaksana, dan cepat belajar adalah suatu keharusan.
• Memiliki keterampilan interpersonal, kepemimpinan, dan resolusi konflik yang sangat baik.
• Memiliki kreativitas, logika, visi, dan keterampilan pemecahan masalah yang luar biasa.
• Memiliki kemampuan komunikasi yang baik dalam bahasa Inggris baik lisan maupun tulisan.
• Bersedia bekerja di Tangerang, Banten

Pertanyaan dari perusahaan

PERSYARATAN:

• Sarjana dari jurusan Teknik ataupun MIPA, dengan pengalaman minimal

8 tahun dimana 3 tahunnya sebagai Asisten Manager, Superintendent, atau

Manager di perusahaan manufaktur di bidang yang terkait.

• Usia Maksimal 38 Tahun

• Detail, teliti, analytical thinking yang baik, serta memiliki kemampuan

memimpin yang mumpuni.

• Tidak bergantung kepada sistem, tertarik untuk mengecek langsung ke

lapangan, serta mampu meningkatkan efektivitas sistem manajemen kualitas

di perusahaan

• Mampu belajar dengan cepat, memiliki kemampuan problem solving dan

decision making yang baik

• Kemampuan bahasa inggris yang mendukung

• Lokasi kerja di Tanjung Morawa, Deli Serdang

TANGGUNG JAWAB

• Memastikan bahwa produk yang dihasilkan telah memenuhi standar

kualitas yang ditetapkan dan dibutuhkan oleh pelanggan

• Mengelola aktivitas departemen QA yang ada di lapangan untuk memastikan

proses produksi mendukung pencapaian standar yang diharapkan

• Melakukan analisa data produksi dan data quality untuk mengajukan

improvement di proses produksi

• Terjun langsung ke lapangan untuk memberikan masukan kepada produksi

dan manajemen terkait pencapaian target perusahaan dari sisi kualitas

dengan tetap mempertimbangkan faktor kuantitas

• Mengajukan dan menjalankan program – program yang dibutuhkan untuk

mendukung visi misi perusahaan dari perspektif kualitas.