Total 48 Others job vacancies in San Antonio, Texas

Aviation Safety Inspectors in this specialty (General Aviation Flight Oversight) apply knowledge and experience of Title 14 of the Code of Federal Regulations (14 CFR) for the development and implementation of standards, programs, and procedures for FAA field personnel and the public governing General Aviation safety issues.

Candidate must complete an extensive training program to include formal and on-the-job training up to and possibly 24 months regardless of grade level.

Duties at the FG-12 grade level include but are not limited to the following:

• Advise managers of aviation organizations on regulatory requirements, make initial certification, evaluate proposals to modify certificates and resolve regulatory and safety problems.
• Evaluate flight school training programs and conduct flight examinations for airmen, and
• Inspect for compliance with aviation regulatory requirements, limitations, and conditions imposed in grants of waivers for experimental aircraft, air shows, and similar special activities.

Duties at the FG-11 grade level include but are not limited to the following:

• Inspect flight schools and instructors,
• Perform routine inspections of organizations for compliance with their approved programs and procedures, 14 CFR, and good safety practices, and
• Advise individual pilots or mechanics in the course of conducting examinations and inspections and with employees and managers in the organizations undergoing inspection.

Duties at the FG-9 grade level are closely supervised and include but are not limited to the following:

• Assisting in evaluating training programs to ensure that they meet the requirements of the FARs under close supervision; and
• Assisting in the re-examination of certificated airmen or recertification of an operator or agency.

Aviation Safety Inspectors (General Aviation Flight Oversight) may perform a variety of other inspections, investigations, and advisory duties.

Inspectors are required to travel frequently and to occasionally work irregular duty hours.

A Recruitment Incentive of $25,000 may be offered to applicants with a signed three-year FAA Recruitment Incentive Service Agreement. Locations must be considered hard to fill and not all locations are eligible. You will be notifed in your offer letter.

Aviation Safety Inspectors in this specialty (General Aviation Operations) apply knowledge and skills typically acquired as airmen (pilots, navigators, flight instructors, etc.) to develop and administer regulations and safety standards pertaining to the operation of aircraft.

Candidate must complete an extensive training program to include formal and on-the-job training up to and possibly 24 months regardless of grade level.

Duties at the FG-12 grade level include but are not limited to the following:

• Examining airmen for initial certification and continuing competence;
• Evaluating airmen training programs, equipment and facilities; and
• Evaluating the operational aspect of programs of air carriers and similar commercial and aviation operations for adequacy of facilities, equipment, procedures and overall management to ensure safe operation of the aircraft.

Duties at the FG-11 grade level include but are not limited to the following:

• Assisting in enforcement investigations and preparation of final reports and recommendations on disposition; and
• Providing assistance in the evaluation of air carriers, air agencies air operators.

Duties at the FG-9 grade level are closely supervised and include but are not limited to the following:

• Assisting in evaluating training programs to ensure that they meet the requirements of the FARs under close supervision; and
• Assisting in the re-examination of certificated airmen or recertification of an operator or agency.

Aviation Safety Inspectors (General Aviation Operations) may perform a variety of other inspections, investigations, and advisory duties; however, the primary requirement for positions in this specialization is knowledge and skill in the operation of aircraft.

Candidate will be required to participate in the flight program as an aircrew member and, as such, must meet the medical and flight currency requirements as set forth in agency orders governing the operation of aircraft.

Inspectors are required to travel frequently and to occasionally work irregular duty hours.

• You will lead multi-disciplinary teams of design and construction engineers that both design facility projects and oversee construction.
• You will determine work priorities for employees to ensure performance to plan goals are met.
• You will lead design staff in performing project management roles for the project (scope, cost, and schedule) from preliminary design authorization to project closeout.
• You will oversee the development of plans and specifications, design-build Requests for Proposals (RFPs), cost engineering and consultation services to primarily support Category I and II work products.
• You will provide construction engineering expertise on projects managed within the PDCB, particularly those of an unusual or complex nature.
• You will review and approve the PWD position concerning contractor entitlement for change through interpretation of contract clauses and the technical requirements of plans and specifications.

• Uses professional engineering skills in engineering disciplines to review contract plans, specifications and work statements for adequacy from the construction point of view for new construction, modification, repair and maintenance of facilities.
• Serves as technical advisor and consultant on various engineering (i.e., civil, mechanical and electrical, etc.) matters and other aspects of projects.
• Provides technical direction to lower-level engineers assigned to various facets of complex projects. Projects may be valued at multi-million-dollar range.
• Coordinates, monitors and/or performs scheduled and unscheduled inspections of the construction activities at project sites, as needed, or at the request of the construction inspector, customer, contractor, Corp of Engineers, or other DoD agencies.
• Ensuring that the construction contracts meet Ft. Bliss, TRADOC, DoD, and contractors' regulations, policies and specialized requirements.
• Provides technical supervision over lower graded engineers in resolving especially complex and difficult problems and situations involving investigation and analysis of design and construction projects.
• Resolves technical problems requiring reconciliation of conflicting technical viewpoints, where different guides point toward conflicting decisions, and where guides are very general or lacking.
• Makes suggestions to supervisor as requested concerning promotions, reassignment, recognition of outstanding performance, and personnel needs. Provides input on performance standards and ratings to supervisor.
• Applies a knowledge of civil, mechanical, and electrical engineering principles, techniques and practices to perform professional work involving the preparation and/or review of engineering designs including plans, specifications, cost estimates

• Assures that projects are inspected for quality, timelines, and customer satisfaction through the proper use of resources, including contracts.
• Coordinates construction management and inspection. Establishes, plans, coordinates, and executes inspection, quality assurance, and technical management control activities for all projects.
• Coordinates the development of scopes of work, requirements, designs, schedules, and budgets for assigned projects ranging from small locally funded projects to Construction of Facility (CoF) projects.
• Manages assigned projects and communicates with the customer involving a full range of engineering and construction disciplines, across all project phases (concept, requirements, design, construction, activation/closeout).
• Monitors and evaluates the status of all assigned work including design and construction cost, quality, and schedule.
• Performs review of drawings and specifications from multiple engineering disciplines during project design review cycles.
• Provides technical expert guidance to clients, peers, and management in developing work packages, facility work requests, and Construction of Facility (CoF) projects.
• Uses pre-project planning techniques, such as the Project Implementation checklist, to identify all project requirements and mission relatedness of major projects prior to initiating project design.
• Foster a culture of engagement, diversity, inclusiveness, excellence and innovation. Champion NASA's commitment to Diversity, Equity, Inclusion and Accessibility to create an environment that promotes a commitment to safety, integrity, and teamwork.

• Oversee development of the design and execution of complex projects with multiple subsystems, services, capabilities, or products that support NASA missions, functions, programs, or projects.
• Advise on theories, principles, practical concepts, processes, and systems related to engineering design, analyses, standards, and techniques in support of a variety of programs, projects, initiatives, Center and Agency missions.
• Monitor and maintain surveillance over projects, hardware and/or software development, or test systems development as a general engineer, in areas like technical management, facility systems, and space flight hardware.
• Plan, guide, coordinate, and manage work engaged in accomplishing technical functions which may include planning, research, design, development, test and evaluation, cost analyses, and project management.
• Provide expertise and leadership to technical teams in order to overcome difficult and complex technical, project, and organizational problems using innovative and original approaches.
• Foster a culture of engagement, diversity, inclusiveness, excellence and innovation. Champion NASA's commitment to Diversity, Equity, Inclusion and Accessibility to create an environment that promotes a commitment to safety, integrity, and teamwork.

• Duties described below are at the highest grade advertised. Duties assigned at lower grade levels will be of more limited scope, performed with less independence and limited complexity; duties will be commensurate with the grade of selected employee.
• Contribute to the design and execution of complex projects with multiple subsystems, services, capabilities, or products that support NASA missions, functions, programs, or projects.
• Generate and apply theories, principles, practical concepts, processes, and systems related to engineering design, analyses, standards, and techniques in support of a variety of programs, projects, initiatives, Center and Agency missions.
• Manage projects, develop hardware and/or software, or develop test systems as a general engineer, in areas like technical management, facility systems, and space flight hardware.
• Perform multiple functions which may include planning, research, design, development, test and evaluation, cost analyses, and project management.
• Use established criteria and professional judgment to manage projects and/or tasks to support Center program and Agency goals.
• Foster a culture of engagement, diversity, inclusiveness, excellence and innovation. Champion NASA's commitment to Diversity, Equity, Inclusion and Accessibility to create an environment that promotes a commitment to safety, integrity, and teamwork.

This vacancy will remain open until filled. The first cut-off cate is 12/02/2024. Additional applicants will be referred as needed.

Duties include, but are not limited to:

• Providing a full range of psycho-diagnostic services which requires advanced and expert skill in a range of specialized interventions and treatment modalities used in specialty treatment programs or with special patient populations. This includes individual, group, and/or family psychotherapy and advanced level psychosocial and/or case management interventions used in the treatment of Veterans with a range DSM diagnoses, substance abuse/dependence, and poly-traumatic injuries
• May have clinical program management responsibilities, which include the operation and management of various psychology or mental health programs within the VA Texas Valley Coastal Bend Healthcare System (VATVCBHCS)
• May have responsibilities for and oversight of the administrative and programmatic resources of various clinical programs that are specialized/complex and significantly impact the delivery of health care services to Veterans in the VATVCBHCS
• Have the ability to expand clinical knowledge in the profession, demonstrating innovation in the creation of new models of psychosocial assessment or intervention to identify and address specialized clinical needs
• Ability to assist in drafting policies, procedures, and/or practice guidelines pertaining to the specialty population or specialty treatment program as assigned
• Completing additional duties as assigned.

This vacancy will remain open until filled. The first cut-off cate is 12/02/2024. Additional applicants will be referred as needed.

Duties include, but are not limited to:

• Providing a full range of psycho-diagnostic services which requires advanced and expert skill in a range of specialized interventions and treatment modalities used in specialty treatment programs or with special patient populations. This includes individual, group, and/or family psychotherapy and advanced level psychosocial and/or case management interventions used in the treatment of Veterans with a range DSM diagnoses, substance abuse/dependence, and poly-traumatic injuries
• May have clinical program management responsibilities, which include the operation and management of various psychology or mental health programs within the VA Texas Valley Coastal Bend Healthcare System (VATVCBHCS)
• May have responsibilities for and oversight of the administrative and programmatic resources of various clinical programs that are specialized/complex and significantly impact the delivery of health care services to Veterans in the VATVCBHCS
• Have the ability to expand clinical knowledge in the profession, demonstrating innovation in the creation of new models of psychosocial assessment or intervention to identify and address specialized clinical needs
• Ability to assist in drafting policies, procedures, and/or practice guidelines pertaining to the specialty population or specialty treatment program as assigned
• Completing additional duties as assigned.

• You will make work site inspections to determine planning requirements, progress of work and status or expenditures.
• You will plan assignment of work on the basis of overall workload status, priorities, employee performance and capabilities and training needs.
• You will communicate both orally and in writing and must exercise the utmost in tactful persuasiveness in addition to sound judgement in the many contacts with all levels of authority with the shipyard.

The RE functions include supporting the Senior Resident Engineer (SRE) by participating in design management with the CFM Project Manager (PM) and VA Medical Center (MC) stakeholders; and when applicable, monitoring various ongoing construction activities and schedule for conformance with contract requirements. The major duties and responsibilities include, but are not limited to:

• Overseeing civil, structural, mechanical, electrical, or architectural aspects of construction.
• Supporting processing of easements, pertinent deeds, local code requirements, and restrictions.
• Participating in the coordination of utility service tie-ins and outages to minimize disruption to ongoing operations.
• Interacting with the CFM PM and Schedule Consultant to help determinate recovery of lost time due to unanticipated events [e.g., weather, delays in material shipments, unanticipated site work problems, etc.].
• Coordinating with local stakeholders and VA Central Office staff.
• Recommending solutions to resolve unusual or unique problems related to hospital design or unanticipated issues occurring during the actual construction of facilities.
• Identifying potential construction related issues to the SRE.
• Reviewing comments from other professionals in a formal response to Architect Engineer (A/E) firms when necessary.
• Interpreting drawings and specifications for the contractor.
• Administering on-site construction and monitoring coordination of work.
• Coordinating commissioning activities for their area of assignment.

• You will provide case assessment, legal advice, legal briefings, and representation to Sailors and Marines who are undergoing the DES process.
• You will serve as the subject matter expert in this complex and constantly evolving practice area.
• You will independently conduct legal research pertaining to medical issues; conduct examination of witnesses; provide case assessment, legal advice, and recommendations to the Service member in support of the case.
• You will prepare legal memoranda in support of board proceedings; and may represent Sailors and Marines during the informal and formal PEB hearing process and in subsequent appeals processes.

• Provide technical support and project management of services contracts.
• Sustains, operates, coordinates, and oversees projects related to services contracts.
• Develop, manage, and administer service and supply service contracts as Contracting Officer's Representative (COR) and Alternate Contracting Officer's Representative.
• Coordinates and integrates all relevant services contracts and sustainment project functions in support of Infrastructure projects.

• Manage the Directorate’s Property Hand Receipts.
• Monitor the movement of non-dispensable and other specifically designated property.
• Perform technical, administrative, and analytical tasks for property accountability.
• Conduct investigations to determine cause of inventory discrepancies by contacting Hand Receipt Holders.
• Submit procurement requirements within the Division’s General Fund Enterprise Business System (GFEBS) as associated with contracts or government purchase card activities
• Monitors contractor compliance with scope of work (SOW) requirements and implements supplemental directives and contract modifications.
• Serve as a central control point for Government Purchase Card (GPC) acquisitions and as an alternate for contracting.
• Assist the Government Credit Card Approving Official/Certifying Officer with purchases of office supplies, equipment, materials, durables, etc.
• Ensure all contracted items are received via Wide Area Workflow (WAWF) system.

DUTIES AND RESPONSIBILITIES

The aviation safety inspector (ASI) receives administrative direction from management in terms of broadly defined missions or functions. The ASI, mostly independently plans, designs, and carries out programs, projects, studies, or other work. The ASI provides policy assistance to ASIs on difficult or complex policy interpretations. The work is normally accepted without change. Completed work may be reviewed for adherence to FAA policy and for assurance that project requirements have been fulfilled.

ASIs at the FG-13 level issue certificates to and monitor (1) a large and complex aviation organization or
(2) a number of smaller organizations that, together, are comparable in complexity to one large one. They are the primary contact point with the aviation organization(s). They may decide on issuance of the original certificates. They evaluate and decide upon proposals to change the authorized programs of the organizations. They continuously monitor the activities of organizations to determine whether they are following their authorized program, Federal regulations, and good safety practices.

FG-13 assignments are characterized by one or more of the following:
1. Commercially operated aircraft or and the complex avionics equipment associated with such
aircraft;
2. A variety of maintenance operations with diverse types of aircraft; or
3. Novel and complex aviation operations.

FG-13 employees plan and conduct their assignments with substantial technical independence. They receive administrative and policy guidance from their supervisors and policy makers. They also obtain technical advice from higher-level inspectors who are experts on a particular type of aircraft or who have overall program responsibility. They independently plan and carry out a work program to meet the needs and monitor the activities of the organizations for which they have certification responsibility. The scope program may be such as to require the occasional assistance of other employees to conduct inspections and evaluate operations.

The ASI applies a mastery knowledge level of the appropriate specialization and a broad knowledge
line of business mission and goals to assigned programs and areas of responsibility.

The ASI plans and directs the use of time and resources to accomplish organizational objectives. He or she defines, organizes, and uses resources to accomplish work activities within established schedules, analyzes program requirements and accomplishments, and makes or directs adjustments as necessary to address organizational needs.

Guidelines and precedents are frequently inadequate for dealing with novel or complex operations.
FG-13 employees understand and apply the basic principles of aviation safety and interpret the
intent of the regulations.

At FG-13, contacts are frequently with owners and top managers of aviation corporations and involve of issues and problems that confront large aviation organizations. Occasionally issues are controversial, arousing considerable public interest.

ASIs at the FG-13 level participate extensively in the certification inspection and surveillance of highly complex air carrier operations where principal program responsibility is vested in an aviation safety inspector of higher grade. These FG-13 employees have broad authority to negotiate with carrier management and make technical determinations within the coverage of approved specifications and policy manuals.

The ASI provides guidance to field level staff to solve difficult technical issues. Resolves all but unique problems, with the intervention of management or a more experienced technical specialist. Develop plans, techniques, and policies to address current and anticipated problems and issues. Works with management to solve problems.

Contacts are internal and external to the agency. The ASI occasionally represents the agency as a point of contact for policy development, inspection activities or as a technical trainer.