WHAT IS THE TS- TAXPAYER SERVICESDIVISION?
A description of the business units can be found at: https://www.jobs.irs.gov/about/who/business-divisions

Vacancies will be filled in the following specialty areas:
Taxpayer Services Customer Account Services, Electronic Products & Services Support (EPSS), e-Help Desk Operations, e-Help Desk East, Andover Team 1

The following are the duties of this position at the full working level.

• Distributes and balances the workload among employees in accordance with established workflow or job specialization, assures timely accomplishment of the assigned workload, and assures that each employee has enough work to keep busy.
• Keeps in touch with the status and progress of work, and makes day-to-day adjustments in accordance with established priorities, obtaining assistance from the supervisor on problems that may arise, such as backlogs which cannot be disposed of promptly.
• Gives on the job training to new employees in accordance with established procedures and practices.
• Maintains current knowledge of procedures, policies and directives. Answers questions and provides both classroom and OJT instruction to employees.
• Amends or rejects work not meeting established standards, refers to supervisor questions and any problems that prohibit the employee from meeting performance standards.

WHAT IS THE TAXPAYER SERVICES DIVISION?
A description of the business units can be found at: https://www.jobs.irs.gov/about/who/business-divisions

Vacancies will be filled in the following specialty areas:
Taxpayer Services, Customer Account Services, Electronic Filing and Services Support, e-help Desk Operations, e-help Desk East, Team 4

The following are the duties of this position at the full working level:

• Distributes and balances the workload among employees in accordance with established workflow or job specialization, assures timely accomplishment of the assigned workload, and assures that each employee has enough work to keep busy.
• Keeps in touch with the status and progress of work, and makes day-to-day adjustments in accordance with established priorities, obtaining assistance from the supervisor on problems that may arise, such as backlogs which cannot be disposed of promptly.
• Gives on the job training to new employees in accordance with established procedures and practices.
• Maintains current knowledge of procedures, policies and directives. Answers questions and provides both classroom and OJT instruction to employees.
• Amends or rejects work not meeting established standards, refers to supervisor questions and any problems that prohibit the employee from meeting performance standards.

HGV TECHNICIAN

OTE: £50,000 pa

HGV Technician salary: up to £42,000 pa + production bonus
Location: Southwest - Andover
Shift Pattern: 4 on 4 off - 12h per shift
Benefits: Paid D2D , Van and Fuel Card

Are you ready for a change in your career? If so, this could be the HGV Technician role for you.

I am currently working alongside a well-established company based in the South west Plymouth Area who are specialists within Fleet Maintenance.

They are looking to recruit an additional HGV Technician to join an already successful team to help enhance the company's ability to service and maintain clients fleets.

To be successful in the HGV Technician role you will need:
·Level 3 or equivalent qualification in HGV/LCV Mechanics
·HGV, PSV or LCV Technician experience
·Full UK Driving Licence preferable
·Reliable and Punctual

If you are interested in hearing more about this HGV Technician opportunity, then please contact Luis at AutoSkills.

Job Reference: 49574

In addition to the HGV Technician role, AutoSkills UK is a recognizes supplier of temporary and permanent staffing solutions within the Commercial Vehicle industry, from Technicians through to Senior management.

Maintenance Supervisor - Hertfordshire
West London
£20p/h - £24p/h
Repairs and Maintenance

Daniel Owen are proud to be representing a well-known social housing contractor based in the London area who are looking for a highly skilled Maintenance Supervisor to join their team.

They are looking for an experienced Supervisor who is experienced in overseeing repairs.

• To ensure appropriate commercial controls are in place and adhered to
• Control the commercial aspects of the supply chain gearing maximum leverage and work seamlessly within the business
• Responsible for overseeing some members of the team
• Firm Understanding of Schedule of Rates for Building Works and disrepair building maintenance surveying background would be desirable
• Previous experience working in the social housing/local authority sector
• Strong team player with excellent communication skills
• Proactive approach to work
• Proven track record for being Reliable and punctual
• Must hold a driving licence and have access to a vehicle

Key Knowledge:

• Social Housing, Building Contractor and local authority industry knowledge
• IT and Excel Literate

If this sounds like a role that suits your profile, then feel free to get in touch.

Test Technician

£24,224 per annum, rising after successful completion of training and probation
Monday - Thursday 08.30 - 17.00, Friday finish at 15.30
Andover
Permanent contract

Benefits of working for our client are:
* Early finish on a Friday
* 4x times salary life assurance
* Profit share scheme
* Plenty of room for progression
* Free parking

We have an exciting opportunity within our highly successful and well-established client, who has a state of the art manufacturing facility which produces bespoke and batch electrical components. They are currently seeking a proactive and driven Test Technician to join their expanding team.

The successful candidate will be responsible for:
* Testing of products
* New and existing product programming
* Building assemblies following drawings/instructions
* Providing feedback about failures

Suitable candidates will demonstrate:
* Previous production testing experience in a manufacturing environment
* Test equipment knowledge
* Hand soldering
* Computer literate

If you are interested please apply now, or for more information please contact us on 01264 332242

Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role.

We are committed to protecting the privacy of all of our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website. https://uk.gigroup.com/

Proud member of the Disability Confident employer scheme

VEHICLE TECHNICIAN
Basic Salary: £33,000
OTE: £38,000
Location: Andover

Benefits:
4 Day Week
Free Holidays
Company Tool Scheme
Company Work Wear
Staff Discounts
Staff Referral Scheme

Are you an enthusiastic, team player, hard working Vehicle Technician looking for a new opportunity or challenge within a Car Dealership?

Responsibilities of a Vehicle Technician
·Work in ranges from servicing a vehicle to general vehicle repair.
·Good technical skills.

Skills and Qualifications of a Vehicle Mechanic
·MUST HOLD an NVQ Level 2/3 in Vehicle Maintenance and Repair
·Previous Vehicle Technician experience within the automotive industry
·Hold your own tools and toolbox
·Full manual UK Driving Licence

Please contact Ryan McArthur @ Auto Skills and quote job number: 48470

Job Title

Job Description Summary

Job Description

C&W Services is the industry leader in Integrated Maintenance Solutions providing service to more than 600 companies worldwide and a sister company of Cushman & Wakefield.

C&W Services offers:

• Weekly Pay!
• Comprehensive Benefits that start on your first day!
• Advancement Opportunities!
• Training to work in a Cutting Edge Facility!
• A Safety First Culture!

About the Role

As a Maintenance Technician II, you will use your skills to support the Operations Maintenance team in repairing and maintaining material handling equipment and pneumatic systems throughout the building. You will have the opportunity to install, maintain and repair automated packaging and distribution equipment. In addition to developing your skills, you will mentor junior technicians to grow in their roles. 

Responsibilities include, but are not limited to:

• Promote a safe working environment by following all safety procedures
• Complete preventative maintenance routines with proper documentation
• Troubleshoot electrical and mechanical problems related to all Material Handling Equipment (MHE) which includes belts, motors, photo-eyes, relays, and more
• Maintain a positive working relationships across all of the Operations facility
• Track and store department inventory

Basic Qualifications:

• High school diploma or equivalent
• 2+ years of experience with automated conveyor systems and controls
• 2+ years of experience in the repair of material handling equipment
• 2+ years of experience conducting predictive and preventative maintenance procedures
• 1+ years of metal and wood fabrication
• 1+ years of blueprint and electrical schematic reading
• 1+ year of knowledge with electrical and electronic principles

Preferred Qualifications:

• Associates or higher degree from a vocational school or college with a focus in the Mechanical or Electrical field
• 2+ years apprenticeship or equivalent experience in the Mechanical or Electrical field
• Experience with Material Handling Equipment (MHE) safety standards accordance with Original Equipment Manufacturer (OEM) and Safety standards
• Project Management experience
• Experience with a Computerized Maintenance Management System (CMMS)
• Experience with robotic operation and maintenance
• Able to troubleshoot basic input and output functions

PHYSICAL DEMANDS:
 The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

• Must have ability to reach overhead, kneel, squat, climb steps/ladders, frequently lift a maximum of 50 lbs. of equipment
• Ability to perform tasks wearing appropriate or required PPE, which may include but is not limited to hard hat, face mask, face shield, and composite toe shoes. 
• Regularly required to crouch or bend and reach to install/move equipment
• Involves movement between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day
• Work in an environment with fluctuating temperatures
• Regularly required to type on a computer for 1-2 hours per day

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.

Job Title

Job Description Summary

Job Description

C&W Services is the industry leader in Integrated Maintenance Solutions providing service to more than 600 companies worldwide and a sister company of Cushman & Wakefield.

C&W Services offers:

• Weekly Pay!
• Comprehensive Benefits that start on your first day!
• Advancement Opportunities!
• Training to work in a Cutting Edge Facility!
• A Safety First Culture!

About the Role

As a Maintenance Technician III, you will lead service technicians on the team in the installation and repair of automated packaging and distribution equipment. You will support the Operations Maintenance team in by designing solutions for difficult problems and managing projects. You will help train, and mentor service technicians and contract technicians.

Responsibilities include, but are not limited to:

• Promote a safe working environment by following all safety procedures
• Maintain and troubleshoot all conveyor systems in the building
• Lead and audit preventative maintenance procedures.
• Install, maintain, and troubleshoot relay logic, ladder diagrams, control components, photo-eyes, motor starters, limit switches, proximity sensors, solenoids, etc.
• Create and close out work orders with data including labor hours, equipment maintenance and parts used
• Maintain a positive working relationship across all of the Operations facility
• Develop training plans for service technicians
• Develop work plans for emergency repair of critical assets

Basic Qualifications:

• High school diploma or equivalent
• 5+ years of experience working with automated conveyors and controls
• 5+ years of experience with electrical and electronic principles, National Electrical Code (NEC), and industrial electronics
• 5+ years of experience conducting preventative maintenance
• 5 + years of experience reading blueprints and schematics
• 5 + years of experience with Programmable Logic Controls (PLC) programs
• 3+ years of work order management

Preferred Qualifications

• Associates or higher degree from a vocational school or college with a focus in the Mechanical or Electrical field
• 4+ years apprenticeship or equivalent experience in the Mechanical or Electrical field
• Previous leadership experience
• Previous vendor management experience
• Experience with robotic maintenance

PHYSICAL DEMANDS:
 The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
  • Ability to reach overhead, kneel, squat, climb steps/ladders, frequently lift a maximum of 50 lbs. of equipment
  • Ability to perform tasks wearing appropriate or required PPE, which may include but is not limited to hard hat, face mask, face shield, and composite toe shoes. 
  • Regularly required to crouch or bend and reach to install and move equipment
  • Ability to move between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day
  • Must be able to work in an environment with fluctuating temperatures
  • Regularly required to type on a computer or stand-up desk and for 1-2 hours per day

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.

Why Patients Need You

Our breakthroughs would not make it to the hands of patients without our pharmaceutical manufacturing team. We rely on a team of dedicated and agile members, who understand the importance and impact of their role in Pfizer’s mission. Patients need colleagues like you who take pride in their work and always look to improve outcomes. You will help to ensure that patients and physicians have the medicines they need, when they need them.

What You Will Achieve

You will support the execution of production according to Standard Operating Procedures and production schedule. Working with interdisciplinary teams, you will implement process improvements and participate in process troubleshooting.

As part of technical operations, you will be developing and applying your knowledge of procedures, techniques, tools, materials and equipment. Your receptiveness to new ideas will enhance the team’s ability to achieve goals and targets.  You will follow standard procedures to complete tasks and identify process issues or problems that involve direct application of your skills/knowledge.

It is your hard work and focus that will help in making Pfizer ready to achieve new milestones and help patients across the globe.

How You Will Achieve It

• Manage own time, professional development and be accountable for own results.
• Support implementation of new technology for process execution and/or analysis.
• Review documentation daily as well as perform data entry.
• Assist in inventory tracking, maintenance scheduling, and troubleshooting of mechanical equipment.
• Executes Standard Operating Procedures (SOPs) for unit operations and maintain current training status for SOPs.
• Complete a variety of accountability reports, pull samples for identification/testing and perform routine product/process functional tests online.
• Responsible for daily facility sanitization of the manufacturing suites controlled environments in accordance with routine requirements and special sanitization requests as needed.

Qualifications

Must-Have

• High School Diploma or GED

Nice-to-Have

• Bachelor's Degree
• Basic mechanical knowledge and experience in using hand tools.
• Manufacturing experience in a Good Manufacturing Practices (cGMP) or other regulated environment.

PHYSICAL/MENTAL REQUIREMENTS

• Requires the moving of heavy equipment and the ability to lift ~50 pounds. The incumbent needs to take the necessary safety precautions when working with pressurized systems, steam, and corrosive chemicals. 

• The incumbent is required to attain detail knowledge of the operational equipment. 

• The incumbent will be required to solve problems regarding site assessment, specific units used in Biopharmaceutical manufacturing. 

• The incumbent must be able to express ideas into SOPs, MFRs and be able to use a multitude of programs including Excel, Word, Power Point, etc. 

NON-STANDARD WORK SCHEDULE, TRAVEL OR ENVIRONMENT REQUIREMENTS

1st shift 6am - 6pm, rotating.

Work Location Assignment: On Premise

OTHER JOB DETAILS

• Last Date to Apply for Job: March 19, 2024
• Referral Bonus Eligibility: YES
• Eligible for Relocation Package: NO

Relocation assistance may be available based on business needs and/or eligibility.

DaVita is seeking a Patient Care Technician who is looking to give life in an outpatient dialysis center. You can make an exceptional difference in the lives of our patients and their families dealing with end-stage renal failure or chronic kidney disease. Do you desire to deliver care in an empathetic, compassionate way - the way you'd want your own care to be?

If you haven't considered Nephrology before, read on as we think that you should.

Joining DaVita as Patient Care Technician (PCT) is an exciting opportunity to jump start your career in the health care industry! With paid, extensive training, you will gain the skills needed to care for our patients and build a network of other health care professionals across the geography where you live. Once you have successfully completed training, you will join a holistic team of care professionals – including nurses, dietitian, social workers, and other experienced PCTs – to care for our patients. It's not a job, it's giving life and a career based on passion and purpose.

DaVita – which is Italian for "giving life" – is working to provide quality service to patients, partners, and teammates. Our mission is to be the Provider, Partner, and Employer of Choice.

Our PCTs also find DaVita professionally fulfilling. To help advance your career, we offer clear paths to higher levels of responsibility and compensation through our Clinical Ladders program. Through DaVita's Bridge to your Dreams program, teammates who have been in their role for six consecutive months and in good standing, are eligible to receive tuition assistance up front to pursue their dream of becoming a DaVita RN and getting their Associates Degree in Nursing. We also have dedicated training to become a Facility Administrator, and training to become a Regional Operations Director. Your success is driven by your performance and desire.

Some details about this position:

• No Dialysis experience is required.

• Training may take place in a facility or a training clinic other than your assigned home clinic

• Potential to float to various clinics during and after your training

• You must have a flexible schedule and be able to work mornings, evenings, weekends, and holidays

What you can expect:

• Direct Patient Care. Spend the majority of your day in direct one-on-one patient care to provide safe, comfortable and hygienic dialysis treatment.

• Our PCTs care for multiple patients.

• Technician Duties. To monitor patients before, during and after dialysis treatment including measuring and recording stats, patient observations, and hemodialysis machine setup. Please note you will have exposure to blood and needles.

• Building long-term relationships with your patients who are suffering from end stage renal disease and are receiving treatment on average 3 times/week. You will also be responsible for educating patients on Kidney Dialysis related topics.

• Team. Cross functional team of clinicians including technicians, nurses, dietitians, social workers and leadership. PCTs work under the supervision of a RN.

What we'll provide:

DaVita Rewards package connects teammates to what matters most including:

• Comprehensive benefits: Medical, dental, vision, 401(k) match, paid time off, PTO cash out

• Support for you and your family: family resources, EAP counseling sessions, access Headspace®, backup child and elder care, maternity/paternity leave, pet insurance, and more

• Paid training

Requirements:

• Desire to enter the health care field to care for other people in need

• High school diploma or equivalent

• Must be comfortable working around blood and needles

• Must be comfortable mixing acid or bicarb

• Physical and mental ability to work long hours (some shifts are 12+ hours) on your feet so wear comfortable shoes! Our work ends when it's safe for our patients.

• Willingness to train and work across multiple clinics within the territory as needed.

• Health care experience a plus including: BONENT Certified, Certified Hemodialysis Technician (CHT), Certified Nursing Assistant (CNA), Certified Medical Assistant (CMA), or Phlebotomy certification.

DaVita is a clinical leader! We have the highest percentage of facilities meeting or exceeding CMS's standards in the government's two key performance programs. We expect our teammates to commit to improving patient health through clinical goal setting and quality improvement initiatives.

Ready to make a difference in the lives of patients? Take the first step and apply now.

Salary/ Wage Range

Compensation for the role will depend on a number of factors, including a candidate’s qualifications, skills, competencies and experience and may fall outside of the range shown. DaVita offers a competitive total rewards package, which includes a 401k match, healthcare coverage and a broad range of other benefits. Learn more at https://careers.davita.com/benefits  

Job Title

Job Description Summary

Job Description

C&W Services is the industry leader in Integrated Maintenance Solutions providing service to more than 600 companies worldwide and a sister company of Cushman & Wakefield.

C&W Services offers:

• Weekly Pay!
• Comprehensive Benefits that start on your first day!
• Advancement Opportunities!
• Training to work in a Cutting Edge Facility!
• A Safety First Culture!

About the Role

As a Maintenance Technician II, you will use your skills to support the Operations Maintenance team in repairing and maintaining material handling equipment and pneumatic systems throughout the building. You will have the opportunity to install, maintain and repair automated packaging and distribution equipment. In addition to developing your skills, you will mentor junior technicians to grow in their roles. 

Responsibilities include, but are not limited to:

• Promote a safe working environment by following all safety procedures
• Complete preventative maintenance routines with proper documentation
• Troubleshoot electrical and mechanical problems related to all Material Handling Equipment (MHE) which includes belts, motors, photo-eyes, relays, and more
• Maintain a positive working relationships across all of the Operations facility
• Track and store department inventory

Basic Qualifications:

• High school diploma or equivalent
• 2+ years of experience with automated conveyor systems and controls
• 2+ years of experience in the repair of material handling equipment
• 2+ years of experience conducting predictive and preventative maintenance procedures
• 1+ years of metal and wood fabrication
• 1+ years of blueprint and electrical schematic reading
• 1+ year of knowledge with electrical and electronic principles

Preferred Qualifications:

• Associates or higher degree from a vocational school or college with a focus in the Mechanical or Electrical field
• 2+ years apprenticeship or equivalent experience in the Mechanical or Electrical field
• Experience with Material Handling Equipment (MHE) safety standards accordance with Original Equipment Manufacturer (OEM) and Safety standards
• Project Management experience
• Experience with a Computerized Maintenance Management System (CMMS)
• Experience with robotic operation and maintenance
• Able to troubleshoot basic input and output functions

PHYSICAL DEMANDS:
 The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

• Must have ability to reach overhead, kneel, squat, climb steps/ladders, frequently lift a maximum of 50 lbs. of equipment
• Ability to perform tasks wearing appropriate or required PPE, which may include but is not limited to hard hat, face mask, face shield, and composite toe shoes. 
• Regularly required to crouch or bend and reach to install/move equipment
• Involves movement between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day
• Work in an environment with fluctuating temperatures
• Regularly required to type on a computer for 1-2 hours per day

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.