Total 42 quality assurance control job vacancies in buckley afb colorado

For additional information on direct hire opportunities with the Air Force please click here.

• Manages Mission Assurance (MA) Program per DoDI 3020.45 with responsibility for implementation of wing-wide installation response and readiness.
• Coordinate, Draft, Plan, Integrate, and Execute all Mission-Focused Complex Mission Assurance and Readiness Exercises at EAFB.
• Plan and design installation exercises-based on Commanders Intent, to include scenario development.
• Draft Exercise Objectives, Master Scenario Events Lists, Commanders Decision Briefs, rehearsals, Warning Orders (WARNORDS), and Operation Orders (OPORDS).
• Conduct vulnerability assessments, All Hazard Threat Assessments/Analysis, along with conducting Mission Analysis Risk Management.
• Responsible for the command and control of exercises through Exercise Control (EXCON), along with assisting the Crisis Action Team (CAT).
• Perform exercise closeout with After Action Reviews (AAR) and archiving exercise documents and developed products to ensure Wing mission requirements and readiness.
• Analyzes data for trends and opportunities for improvement across the organization.
• Assist in Developing a Mission Assurance and Wing Readiness Cross-Walk that depicts Wing readiness and Response Posture.

The primary purpose of this position is: To serve as a first level supervisor, providing planning, directing, organizing, and exercising control over nonsupervisory employees assigned to 57th Operations Support Squadron, Airfield Operations Flight (OSA). To provide air traffic control (ATC) services to military and civilian aircraft operating in a RADAR environment using instrument flight rules (IFR) and visual flight rules (VFR) providing for the safe, orderly, and expeditious flow of air traffic. To provide non-radar services in allocated airspace in the event of radar outages.

• Plans, organizes, and directs the activities of 57 Operations Support Squadron, ensuring that Nellis Air Traffic Control Facility complies with legal and regulatory requirements and meets customer needs
• Exercises supervisory personnel management responsibilities
• Represents the 57 Operations Support Squadron with a variety of installation and functional area organizations
• Provides leadership and mentoring to all assigned air traffic control personnel
• Maintains certification requirements

The primary purpose of this position is: To provide air traffic control (ATC) services to military and civilian aircraft operating in a radar environment using instrument flight rules (IFR) and visual flight rules (VFR) providing for the safe, orderly, and expeditious flow of air traffic. To provide non-radar approach control services in allocated airspace, in the event of radar outages.

• Directs movement of aircraft in flight and on the ground as displayed on radar indicator or pilot reported
• Operates communication and display equipment and provides emergency assistance to aircraft
• Provides instruction and assistance to air traffic control personnel
• Maintains certification requirements

• Works under general supervision of Resident Engineer.
• Determines whether all materials and equipment to be incorporated into finished job meet plans and specifications.
• Ensures proper installation and workmanship, safety requirements, adherence to progress schedules, etc.
• Reviews contractor's shop drawing details to ascertain adherence of the proposed work to contract requirements.
• Work is primarily with solution of technical problems, controversial interpretation of design and/or installation details, proposed contract changes, and progress and payment estimate matters.
• Reviews pre-bid plans and specifications for Biddability/ Constructability/Operability (BCO) on assigned contracts to determine practicality from a construction standpoint.
• Evaluates contractors' price proposals for additional work to be performed under the original contract and payment estimate items for consistency with actual job-site status of work.
• Inspects on-the-job construction progress to ensure that the contractor is maintaining satisfactory progress.

The primary purpose of this position is: To provide visual flight rules (VFR) air traffic control services to aircraft operating in the vicinity of an airport or on the controlled movement area of the airfield, providing for the safe, orderly, and expeditious air traffic flow.

• Controls military and civilian aircraft under visual flight rules (VFR) in a control tower environment
• Observes and reports airport advisories, critical weather information, and equipment outages
• Provides instruction and assistance to air traffic control personnel
• Maintains certification requirements

• Evaluate effectiveness for Fuels Management functions
• Observes, rates and evaluates receipt of incoming petroleum fuel and cryogenic product
• Monitors, evaluates, and rates the inventory and inspection of the storage/distribution system
• Observes, evaluates, and rates operator maintenance of the fuel storage and dispensing equipment
• Utilizes safety practices and procedures following established safety rules and regulations

As a Theater Aerospace Operations Command and Control Specialist, GS-2101-11, you will administer refresher and advance training to ANG military AOC weapons systems positional specialists. Instruct and evaluate AOC assigned technician personnel in advanced aerospace operations applications using current AOC weapons systems of record. Instruct and evaluate enlisted AOC specialties to become instructors. Instruct same to function within established joint doctrinal principles to support the planning and prosecution of theater level joint operations. Monitor progress during training and advise when AOC personnel are ready for positional certification. Interview assigned enlisted AOC personnel to determine operational background in their respective weapons systems/specialties. Prescribe type, sequence, and extent of required training. Perform as instructor and/or examiner, evaluating and examining AOC personnel to determine preparation for the application of aerospace force/operations, proficiency during actual operations, instructional ability, technical competence, and post operations critique. Determine progress and proficiency levels, provide requalification evaluations, and direct/provide specialized remedial or additional training as necessary.

The primary purpose of this position is: To provide visual flight rules (VFR) air traffic control services to aircraft operating in the vicinity of an airport or on the controlled movement area of the airfield, providing for the safe, orderly, and expeditious flow of air traffic.

• Controls military and civilian aircraft in a Visual Flight Rules (VFR) control tower environment
• Observes and reports airport advisories, critical weather information, and equipment outages
• Provides instruction and assistance to air traffic control personnel
• Maintains certification requirements

The primary purpose of this position is: To provide visual flight rules (VFR) air traffic control services to aircraft operating in the vicinity of an airport or on the controlled movement area of the airfield, providing for the safe, orderly, and expeditious air traffic flow.

• Controls military and civilian aircraft under visual flight rules (VFR) in a control tower environment
• Observes and reports airport advisories, critical weather information, and equipment outages
• Provides instruction and assistance to air traffic control personnel
• Maintains certification requirements

• Plans, directs, and implements in-plant quality assurance programs for contracts assigned to the Contract Management Office (CMO).
• Guides, motivates, and oversees subordinates with a focus on project/program issues.
• Assumes ownership of processes and products as appropriate.
• Resolves diverse, highly complex problems across multiple areas and disciplines.
• Uses innovative approaches to resolve unusual and difficult issues that significantly impact important policies and programs.
• Anticipates problems, then develops solutions and action plans to ensure program/mission success.
• Completes multiple project and program goals within established guidelines.

• Designs/implements/maintains a risk-based surveillance program and assessment plan associated with the quality assurance provisions of contracts.
• Identifies opportunities for process improvements by analyzing data.
• As a member of a multi-functional or technical team, implements the overall Quality Program for diverse products and services to support the U.S. Government’s acquisition at one or more supplier facilities.
• Ensures contractor compliance with design, manufacturing, repair, overhaul, and modernization requirements.
• Independently audits/surveys contractor processes to ensure compliance with customer/contractual requirements.
• Investigates customer complaints/concerns about contractor quality performance and processes which impact user satisfaction, then provides data about the complaints.
• Provides technical support to DCMA team members, assisting with analyzing contractual issues, and determining the best course of action to support the contractor and customers.

As a Joint Interface Control Analyst, GS-0301-12, you will apply broad and expansive knowledge and education of military, civil, and data link capabilities in support of AOC operations. Responsible to the CONR JICO in the daily execution and personnel training of the multi-TDL operation in and around the CONUS which includes working with all U.S. and Canadian military services. Responsible for conducting the continued planning, re-planning and problem resolution to establish, execute, and maintain an effective long-term CONR data link architecture and OPTASKLINK in the face of technology change, increasing amount of data link assets, and increasingly complex operational interoperability issues. Responsible to maintain an understanding of the various weapon systems' data link capabilities and limiting factors with regards to protocols, bandwidth, and message implementation. Responsible to maintain functional knowledge of AOC command and control (C2) equipment in the nee cell and HCC equipment room. This includes operations, test and training with regards to appropriate message filters, network data load, crypto, assigned frequency, and network timing. Responsible to act as the watch officer responsible for the daily operation of the nee and for providing an accurate single integrated air picture (SIAP) to all network participants in and around the CONUS to maintainairspace control and safety of flight for operational and training assets. Authorizes and directs real-time changes to OPTASKLINK parameters to include data load, crypto, frequency, time slots, or network timing to trouble shoot and deconflict multi-TDL operations, test and training across the area of operation. Responsible to execute the JICO duties in the absence of the CONR JICO. Responsible to identify the TDL current and future information exchange requirements for the various systems missions tasked by our leadership.

As a ASOC Interface & Procedural Control Instructor, GS-2101-11 you will:

Perform the full range of WG-5823-10 duties and responsibilities. Possess the knowledge and skills found at the journey level as well as those required for planning, accomplishing, and maintaining a functional shop maintenance program.

Plan and lay out work to be accomplished in the shop, which is then completed by the incumbent and lower graded mechanic(s). Independently determine appropriate maintenance procedures such as how and when the work should be accomplished. Estimate manpower, equipment and material requirements. Devise and maintain all program plans and records, skilled in surveillance and troubleshooting techniques, and is able to determine maintenance/repair procedures needed without benefit of technical supervisory guidance. Plan, organize and direct shop maintenance programs/procedures under general supervision. Determine approach, methods and courses of action required to accomplish the mission of the shop in an effective and efficient manner.

May provide recommendations and input to the supervisor concerning personnel actions such as performance appraisals, awards, position descriptions changes, disciplinary actions, leave, etc. Implement safety regulatory requirements. Ensure that other workers in the shop wear appropriate safety equipment and follow pertinent safety precautions.

Perform other duties as assigned.

• Serves as a team leader for a quality assurance team, assigning work, providing feedback, checking progress, arranging training for team members, and providing input to supervisor.
• Reviews contracts to identify specification requirements needed from contractors.
• Communicates with contractors to ensure contractual compliance of contractor processes.
• Assesses contractor/subcontractor/vendor quality assurance controls; then adjusts product audits.
• Creates risk management program to mitigate the Governments risk by analyzing data/contractual requirements, preparing surveillance plans, and addressing specific customer/Organizational requirements.
• Evaluates supplier quality systems using data validation, post-award first article meetings, and suppliers test reports, then recommends dis/approval to contracting officers.
• Evaluates suppliers responses to quality issues and requests corrections.
• Retains relevant data, correspondence, audits, etc.

As a Theater Aerospace Operations Command and Control Officer, GS-2101-12, you will administer refresher and advanced training to ANG military AOC weapons systems positional specialists. Instructs rated pilots, navigators, air battle managers, space operations specialists, and other AOC assigned personnel in advanced aerospace operations applications using current AOC systems of record. Instructs and evaluates all AOC specialists to become instructors. Instructs such personnel to function within established joint doctrinal principles to plan and prosecute theater-level joint operations. Monitors progress during training and advises when AOC personnel are ready for positional certification.