This position can be fully remote.

PURPOSE AND SCOPE:

Responsible for the End-to-End quality and sustainability with allocated supply base, validate, and release components, as well as support the definition and implementation of supplier quality functional excellence initiatives. Ensures the company receives top quality product and service at all times and will investigate, root cause, and make recommendations on how to proceed with suppliers who do not meet that requirement.

PRINCIPAL DUTIES AND RESPONSIBILITIES:

• Under close supervision, utilizes established procedures to perform routine assigned tasks to interface directly with suppliers to follow up on the quality and performance issues, manage Supplier Corrective Action Requests.
• Performs on-site and remote supplier quality audits for new suppliers; participates in supplier approval process.
• Documents and follows up on audit results and required actions to be addressed by the supplier.
• Tracks, analyzes, and reports in supplier performance metrics to stakeholders within quality, logistics, and manufacturing management using the appropriate software tools.
• Performs problem analysis, process, and machine capability studies as required, and for determining and proposing statistical process controls for appropriate supplier’s processes. 
• Learns to use professional concepts. Applies company policies and procedures to resolve routine issues.
• Works on problems of limited scope. Follows standard practices and procedures in analyzing situations or data from which answers can be readily obtained.
• Builds stable working relationships internally. 
• Normally receives specific, detailed instructions on all work. 
• Reviews and complies with the Code of Business Conduct and all applicable company policies and procedures, local, state, and federal laws and regulations.
• May refer to higher level staff, if applicable, for assistance with day-to-day problems that may arise.
• Escalates issues to supervisor/manager for resolution, as deemed necessary.
• Assist with various projects as assigned by direct supervisor.
• Other duties as assigned.

Additional responsibilities may include focus on one or more departments or locations.  See applicable addendum for department or location specific functions.

PHYSICAL DEMANDS AND WORKING CONDITIONS:

• The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Up to 30% travel as required.

EDUCATION:

• Bachelor’s Degree required.

EXPERIENCE AND REQUIRED SKILLS:

• Minimum 0 – 2 years of related experience; or an advanced degree without experience.
• Experience using quality tools.
• Problem solving ability, strong analytical skills and diplomacy required.
• Must possess good computer skills.
• Strong oral and written communication skills.

EO/AA Employer: Minorities/Females/Veterans/Disability/Sexual Orientation/Gender Identity

Fresenius Medical Care North America maintains a drug-free workplace in accordance with applicable federal and state laws.

EO/AA Employer: Minorities/Females/Veterans/Disability/Sexual Orientation/Gender Identity

Fresenius Medical Care North America maintains a drug-free workplace in accordance with applicable federal and state laws.

------------------------------------------------------

Job Family Group:

------------------------------------------------------

Job Family:

------------------------------------------------------

Time Type:

------------------------------------------------------

Citi is an equal opportunity and affirmative action employer.

Qualified applicants will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Citigroup Inc. and its subsidiaries ("Citi”) invite all qualified interested applicants to apply for career opportunities. If you are a person with a disability and need a reasonable accommodation to use our search tools and/or apply for a career opportunity review Accessibility at Citi.

View the "EEO is the Law" poster. View the EEO is the Law Supplement.

View the EEO Policy Statement.

View the Pay Transparency Posting

Job Title

Job Description Summary

Job Description

C&W Services is the industry leader in Integrated Maintenance Solutions providing service to more than 600 companies worldwide and is a sister company of Cushman & Wakefield.

C&W Services offers:

• Weekly Pay!
• Comprehensive Benefits that start on your first day!
• Advancement Opportunities!
• Training to work in a Cutting Edge Facility!
• A Safety First Culture!

About the Role:

As a Control Systems Lead, you will lead service technicians on the team with maintaining, troubleshooting, and modifying Material Handling (MHE) controls systems equipment to ensure operational performance. You will support the Operations Maintenance team by designing solutions for difficult problems and managing projects. You will help train, and mentor service technicians and contract technicians.

Responsibilities include, but are not limited to:

• Promote a safe working environment by following all safety procedures
• Troubleshoot and modify software programs for material handling control systems, including PLC/PC controllers, Allen Bradley Controllogix and Compactlogix PLC platform utilizing RSLogix 5000 software package. Including Industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, AS-I, motor control systems, servo drives, frequency drives, and electrical distribution systems.
• Act as first level escalation support for the control system technician teams. Appropriately escalate downtime situations to vendors or headquarters for support to restore equipment operation.
• Apply subject matter expertise in material handling and electronic control systems to maximize building utilization of systems
• Monitor MHE metrics and partner with Controls Technicians and Mechanics to resolve equipment electrical problems that create performance deficiencies. Perform controls systems assessments to maintain and improve equipment reliability
• Partner with Facility Operations leadership, equipment vendors and parts suppliers to plan and coordinate new technology installations. Acting as the technical consultant for capital projects inside the building
• Communicate technical issues and project timelines with building leadership, operations and the maintenance team.  Explain production impacts and work closely with operations and engineering to ensure a thorough understanding of impact to systems
• Develop training plans for Control Systems Technicians

Basic Qualifications:

• Associates degree with a focus in in Electronic Technology or equivalent experience 
• 5+ years of experience with Motor Controls (motor starts, variable frequency drives, DC drives, and standard electrical components) 
• 5+ years of experience with programming HMI components
• 5+ years of experience with Programmable Logic Controls (PLC) programs
• 5+ year of experience with Robotics system components and controls
• 3+ years with SCADA systems and KPI's
• Experiencing interpreting and modifying mechanical and electrical drawings

Preferred Qualifications:

• Bachelor’s degree in Electrical Engineering or related field
• 4+ years of experience in the Electrical fields, or in Control Systems development, troubleshooting and programming
• 4+ years of experience supporting advanced automation controls systems maintenance and development
• 3+ years of experience supporting a wide range of conveyors and sortation systems
• Leadership and project management experience
• Experience with ASRS systems and Computerized Maintenance Management Systems (CMMS)

PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

• Ability to reach overhead, kneel, squat, climb steps/ladders and frequently lift a maximum of 50 lbs. of equipment
• Ability to perform tasks wearing appropriate or required PPE, which may include but is not limited to hard hat, face mask, face shield, and composite toe shoes.
• Regularly required to crouch or bend and reach to install and move equipment
• Ability to move between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day
• Must be able to work in an environment with fluctuating temperatures
• Regularly required to type on a computer for 1-2 hours per day

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.

Job Description Summary

Job Description

We are the makers of possible 

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities. 

We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you’ll be supported to learn, grow and become your best self. Become a maker of possible with us. 

JOB SUMMARY:
The Quality Manufacturing Representative’s primary functions are to assure manufacturing operations meet the quality system requirements, product is released to sterilization and shipping after review of documentation and assisting Quality engineers with quality issues. This position will also provide training, guidance, and input on quality issues to the manufacturing floor. This position will also audit compliance to the quality policy and procedures. The incumbent will participate in continuous improvement and other plant initiatives as needed in support of business goals. This position reports directly to a Quality Engineer.

HOURS: 7AM - 7PM

ESSENTIAL FUNCTIONS:  

• Performs review of manufacturing documentation

• Releases product to the next stage of manufacturing or shipping

• Follows up on manufacturing issues with appropriate parties

• Perform complete inspection of product according to applicable specifications

• Reports issues to the Quality Engineers and assist as needed with quality related issues

• Document all inspections as required

• Update all reports and databases as required for reporting and tracking purposes

• Possess knowledge of Quality System Regulations

• Ensure manufacturing associates are properly trained using documented inspection techniques

• Must perform duties and maintain knowledge to conduct inspections and tasks among all manufacturing/molding departments

• Apply and interpret ANSI Z1.4 and other sampling plans for predicting percent defective and lot acceptance criteria

• Conduct routine product and process audits to assure compliance to the quality system.

• Maintain a clean and safe work environment

• Hold self-accountable to follow all safety policies & procedures

• Good Manufacturing Practices

• Perform all other miscellaneous duties as appropriately directed by Quality Management

REQUIREMENTS:

• HS diploma/GED

• Proficient at reading / writing English

• Good attention to detail

• Ability to give/receive feedback

• Team player able to work well with others

• Plan / Organize tasks based on priority and timelines

• Take initiative (see what needs to be done and do it)

• On the job training provided, however, but be a rapid learner

For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.

Why Join Us?

A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.  

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place.  

To learn more about BD visit https://bd.com/careers 

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status. 

Primary Work Location

Additional Locations

Work Shift

About Us:

How many companies can say they’ve been in business for over 177 years?!

Here at ZEISS, we certainly can! As one of the pioneers of science, ZEISS handles the everchanging environment of our fast-paced world, meeting it with cutting edge technologies and continuous advancements. ZEISS believes that innovation and technology are the key to a sustainable future and solutions for global change. We have a diverse range of portfolios throughout the ZEISS family in segments like, Industrial Quality & Research, Medical Technology, Consumer Markets and Semiconductor Manufacturing Technology. We are a global company with over 42,000 employees and with over 4,000 in the US and Canada alone! Make a difference, come join the team!

What’s the role?

As a Field Service Technician, you get to work with an astonishing team that plays a vital role in Carl Zeiss Industrial Quality Solutions, LLC. Show case your skills and experience by process enhancements focused on installation and servicing of custom equipment. You will interact with customers and cross functional service groups that support and launch ZEISS products into the field. Additionally, you will aid the R&D team with engineering work in relation to design, build, and new system testing. This position will also support the production of systems during various stages of assembly and setup.

Sound Interesting?

Here’s what you’ll do:

• Install, Repair, Troubleshoot, Service and Calibrate high tech machines at customer locations.
• Demonstrate customer service skills and knowledge with a high level of passion and dedication.
• Demonstrate your ability to learn new skills on high tech CMM’s (Coordinate Measuring Machines) utilizing mechanical and electronic aptitude.
• Perform necessary administrative paperwork in a complete and accurate manner.
• Be Solutions-oriented with the ability to work independently in a high pressure, fast-paced and innovative environment.
• Travel requirement is 90-100% within the service area, including international travel as needed.
• Other duties as required.

Job Requirements

Do you qualify?

• Minimum, High School graduate, completed GED or equivalent.
• Or, Tech School, associate, or bachelor’s degree in a technical discipline such as, Electronics, Industrial Mechanics, and the like.
• Or, Training and experience from a Military Technical School.
• Prior experience working with hand tools and basic electrical test equipment.
• Microsoft operating system knowledge is required.
• Capable of unassisted physical lift of one article weighing up to 75 pounds.
• Able and willing to work minimum of 50 hours per work week. Regular + OT.
• Ability to work in an industrial production shop floor environment.
• Valid Driver License required.
• Excellent communication and customer service aptitude.​

Nice to haves:

• Previous experience installing and troubleshooting industrial electronics, machines, or computer systems.
• Previous CMM (Coordinate Measuring Machine) installation and troubleshooting experience is preferred however not required.

ZEISS is an EEO/AA/M/F/Disabled Veteran Employer

Your ZEISS Recruiting Team:

Zeiss provides Equal Employment Opportunity without unlawful regard to an Applicants race, color, religion, creed, sex, gender, marital status, age, national origin or ancestry, physical or mental disability, medical condition, military or veteran status, citizen status, sexual orientation, pregnancy (includes childbirth, breastfeeding or related medical condition), genetic predisposition, carrier status, gender expression or identity, including transgender identity, or any other class or characteristic protected by federal, state, or local law of the employee (or the people with whom the employee associates, including relatives and friends). 

Job Description Summary

Job Description

We are the makers of possible 

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities. 

We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you’ll be supported to learn, grow and become your best self. Become a maker of possible with us. 

Responsibilities

1.      Process service records for Bard/BD Direct and Contract Service Providers (CSP) by reviewing paperwork for accuracy, completeness and correctness.

2.      Coordinate with Field Assurance (FA) in following up with service providers to clarify issues with complaint records so that the records can be closed in a timely manner in accordance with divisional target dates and regulatory requirements.

3.      Perform Device History Reviews (DHR) and Process Failure Mode and Effects Analysis (PFMEA) reviews in support of complaint investigations.

4.      Communicate problems, situations, opportunities, and progress to management.

5.      Additional task requested, as required.

Educational Qualifications & Previous Experience

• High School Diploma or GED required. Associate degree in Business Management, Medical Office Admin, or related field preferred

• 1 to 3 years experience (medical device industry preferred)

• Familarity with service management systems ServiceMax or TrackWise a plus

Professional Skills & Key Competencies

• Proficient skills in Microsoft Office, including Microsoft Word and Excel

• Excellent organizational skills and attention to detail

• The ability to build relationships within the organization

Desired / Additional Skills & Knowledge

• Basic familiarity with MS Office Products (Word, Excel, Outlook)

• Ability to utilize a computer to enter data and prepare reports.

• Ability to lift a 20 lb load from the floor.

• Ability to be able to work with limited supervision.

For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.

Why Join Us?

A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.  

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place.  

To learn more about BD visit https://bd.com/careers 

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status. 

Primary Work Location

Additional Locations

Work Shift

Job Title

Job Description Summary

Job Description

C&W Services is the industry leader in Integrated Maintenance Solutions providing service to more than 600 companies worldwide and is a sister company of Cushman & Wakefield.

C&W Services offers:

• Weekly Pay!
• Comprehensive Benefits that start on your first day!
• Advancement Opportunities!
• Training to work in a Cutting Edge Facility!
• A Safety First Culture!

About the Role:

As a Control Systems Lead, you will lead service technicians on the team with maintaining, troubleshooting, and modifying Material Handling (MHE) controls systems equipment to ensure operational performance. You will support the Operations Maintenance team by designing solutions for difficult problems and managing projects. You will help train, and mentor service technicians and contract technicians.

Responsibilities include, but are not limited to:

• Promote a safe working environment by following all safety procedures
• Troubleshoot and modify software programs for material handling control systems, including PLC/PC controllers, Allen Bradley Controllogix and Compactlogix PLC platform utilizing RSLogix 5000 software package. Including Industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, AS-I, motor control systems, servo drives, frequency drives, and electrical distribution systems.
• Act as first level escalation support for the control system technician teams. Appropriately escalate downtime situations to vendors or headquarters for support to restore equipment operation.
• Apply subject matter expertise in material handling and electronic control systems to maximize building utilization of systems
• Monitor MHE metrics and partner with Controls Technicians and Mechanics to resolve equipment electrical problems that create performance deficiencies. Perform controls systems assessments to maintain and improve equipment reliability
• Partner with Facility Operations leadership, equipment vendors and parts suppliers to plan and coordinate new technology installations. Acting as the technical consultant for capital projects inside the building
• Communicate technical issues and project timelines with building leadership, operations and the maintenance team.  Explain production impacts and work closely with operations and engineering to ensure a thorough understanding of impact to systems
• Develop training plans for Control Systems Technicians

Basic Qualifications:

• Associates degree with a focus in in Electronic Technology or equivalent experience 
• 5+ years of experience with Motor Controls (motor starts, variable frequency drives, DC drives, and standard electrical components) 
• 5+ years of experience with programming HMI components
• 5+ years of experience with Programmable Logic Controls (PLC) programs
• 5+ year of experience with Robotics system components and controls
• 3+ years with SCADA systems and KPI's
• Experiencing interpreting and modifying mechanical and electrical drawings

Preferred Qualifications:

• Bachelor’s degree in Electrical Engineering or related field
• 4+ years of experience in the Electrical fields, or in Control Systems development, troubleshooting and programming
• 4+ years of experience supporting advanced automation controls systems maintenance and development
• 3+ years of experience supporting a wide range of conveyors and sortation systems
• Leadership and project management experience
• Experience with ASRS systems and Computerized Maintenance Management Systems (CMMS)

PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

• Ability to reach overhead, kneel, squat, climb steps/ladders and frequently lift a maximum of 50 lbs. of equipment
• Ability to perform tasks wearing appropriate or required PPE, which may include but is not limited to hard hat, face mask, face shield, and composite toe shoes.
• Regularly required to crouch or bend and reach to install and move equipment
• Ability to move between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day
• Must be able to work in an environment with fluctuating temperatures
• Regularly required to type on a computer for 1-2 hours per day

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.

This position is responsible for providing technical support regarding the chemistry of products, adherence to quality specifications, regulatory and environmental compliance.  The successful candidate will be able to perform chemical testing of batches, line samples, and raw materials along with providing batch adjustments as necessary.   They will also be able to tabulate and summarize a variety of data. This candidate should also be able to actively participate and comply with our Quality, Health, and Environmental programs, including: training initiatives and following all policies and procedures. This position works in a team environment and is required to assist others as necessary.

Quality Control Technician

ABOUT DIVERSEY

Diversey’s mission is to protect and care for people through leading hygiene, infection prevention, and cleaning solutions. We develop and deliver innovative products, services, and technologies that save lives and protect our environment. Over the course of 95 years, the Diversey brand has become synonymous with product quality, service, and innovation. 

Our fully integrated suite of solutions combines patented chemicals, dosing and dispensing equipment, cleaning machines, services, and digital analysis. We are a trusted partner serving more than 85,000 customers in over 80 countries with a network of approximately 8,500 employees globally.

We are the leading global pure play provider to the cleaning and hygiene industry for the institutional and food and beverage markets. We provide customers peace of mind by helping maintain their brand integrity so they can focus on growing their business. Through end-to-end repeatable services, we deliver the highest standards across customer locations to achieve improved operational efficiency and environmental sustainability.

POSITION SUMMARY

This position is responsible for providing technical support regarding the chemistry of products, adherence to quality specifications, regulatory and environmental compliance.  The successful candidate will be able to perform chemical testing of batches, line samples, and raw materials along with providing batch adjustments as necessary.   They will also be able to tabulate and summarize a variety of data. This candidate should also be able to actively participate and comply with our Quality, Health, and Environmental programs, including: training initiatives and following all policies and procedures. This position works in a team environment and is required to assist others as necessary.

KEY RESPONSIBILITIES

• Employs safe work habits and complies with all applicable Diversey safety requirements
• Works closely with the Quality Manager and Supervisor, Plant Management, Production teams, and QA personnel at other sites
• Ensures products are produced according to the Bill of Materials (BOM)
• Provides daily production support including: timely testing, evaluating, and recording test results for raw materials, production batches, and finished products
• Calculates and provides adjustments to products as required and communicates with R&D and Regulatory for process improvements for both mixing and packaging
• Operates/Maintains laboratory instrumentation
• Conducts audits and summarizes data for management review
• Coordinates and performs ATP testing to release micro sensitive products to comply with Hygienic Manufacturing Guidelines
• Provides support to the plant with regard to waste minimization, environmental compliance, regulatory compliance, timely disposition of returns , discrepant product and materials
• Prepares customer Certificates of Analysis (COA’s)
• Reviews and files raw material Certificates of Analysis
• Reviews laboratory work instructions
• Trains and assists plant personnel in the use and standardization of laboratory equipment and procedures in their departments
• Trains new lab personnel in procedures, product analysis, and instrumentation use and maintenance.
• Utilize SPC methods in data collection, Root Cause Analysis, Corrective/Preventive Action effectiveness, and Cost saving/Avoidance Analysis
• Supports the compliance and maintenance of GMP and ISO 9001/14001 documentation
• Performs GMP and ISO 9001 and ISO 14001 audits as scheduled
• Reviews, inspects and authorizes the release of DIN products (GMP) as well as perform routine stability testing on Plant manufactured goods
• Participates in continuous improvement activities such as 5 Why Investigations, Kaizen, TPM, etc.
• Ability to change shifts to cover vacation and needs of the business

REQUIRED QUALIFICATIONS:

• Minimum Education Required: Bachelor’s in Chemistry or related science with minor in Chemistry OR experience may be substituted for education
• Minimum Experience required: 
  • At least 1 year of experience in a Quality Control environment within a GMP regulated facility
  • Experience with IR, UV/VIS, HPLC, and GC instruments
• Physical Requirements:  
  • Ability to stand for periods of up to 4 hours at a time
  • Ability to perform repetitive bending and stretching on a daily basis
  • Ability to lift up to 45 pounds occasionally
  • Employee must use and maintain their PPE, and follow Area specific PPE policies and rules
• Travel: travel will be less than10%

ADDITIONAL QUALIFICATIONS:

• Organizational Skills: Must be able to take and follow directions.
• Communication Skills: Excellent verbal and written skills. 
• Problem Solving: High degree of analysis, problem solving and creativity.
• Technical Skills:  Must be able to solve mathematical problems at the high school level.  Must also have some basic hand tool skills.
• Honesty/Integrity:  Acts with integrity.  Is trusted and seen as a direct, truthful individual.  Can present truth in an appropriate and helpful manner.  Keeps confidences, admits mistakes; doesn’t misinterpret him/herself for personal gain.  Stands up for convictions and values and makes difficult decisions.
• Action Oriented:  Enjoys working hard; is action oriented and full of energy for the things he/she sees as challenging; not fearful of acting with minimal planning; seizes more opportunities than others.
• Teamwork:  Strives for win/win solutions; co-operates with co-workers to achieve goals; provides support and encouragement to co-workers; brings substantive conflicts and disagreements into the open and attempts to resolve them collaboratively.
• Peer Relationships:  Can solve problems with peers with a minimum of noise, is seen as a team player and is cooperative.  Easily gains trust and support of peers, and can be candid with peers.
• Creativity:  Comes up with a lot of new and unique ideas; easily makes connections among previously unrelated notions; tends to be seen as original and value-added in brainstorming settings.
• Dealing with Ambiguity: Can effectively cope with change; can shift gears comfortably; can decide and act without having the total picture; isn’t upset when things are up in the air; doesn’t have to finish things before moving on; can comfortably handle risk and uncertainty.
• Developing Others: Provides challenging and stretching tasks and assignments; will take on those who need help and further development; cooperates with the developmental system in the organization; is a people builder.
• Drive for Results: Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; very bottom-line oriented; steadfastly pushes self and others for results.
• Planning:  Accurately scopes out length and difficulty of tasks and projects; sets objectives and goals; breaks down work into the process steps; develops schedules and task/people assignments; anticipates and adjusts for problems and roadblocks; measures performance against goals; evaluates results.

REPORTING LINE

This role will report into the Quality Supervisor

DIRECT REPORTS

No

BAND:

B05/ Job Code: TW4286

NOTE:

This Position Description describes the principal functions, the level of knowledge typically required, and the scope of responsibility for the position. This should not, however, be construed as an all-inclusive listing of requirements. Individuals may perform other duties as assigned, deemed necessary, and clearly defined via customized job descriptions or objective based management techniques.

Key Role:
Provide on-site day-to-day management and subject matter expertise (SME) support to identify and integrate Combined Joint All Domain Command and Control (CJADC2) systems and capabilities for the DoD. Lead, organize, direct, and coordinate the planning and production of all contract support activities in support of Government personnel and execute CJADC2 tasks harnessing professional expertise in the military, joint warfighting, and event and project management. Interpret technical, and Cyber-specific ideas, concepts, and implementation of CJADC2 into new and existing systems and architectures that support the strategies and other authoritative Government documents and sources, draft fact-based, well-researched, persuasive, and high-impact messages and other textual and editorial content for various internal and external stakeholders and audiences. Maintain situational awareness of CJADC2 issues and work collaboratively with military staff action officers to create, iterate, and update deliverables, from inception to acceptance and approval by the organization.

Basic Qualifications:  

• 5+ years of experience with strategic communications, public relations, C4, Cyber, and executive-level support

• Experience as a staff action officer or program manager

• Ability to strategically communicate a cohesive message to multiple DoD components

• TS/SCI clearance

• Bachelor's degree

Additional Qualifications:  

• Experience with the Joint Staff or in a U.S. military joint environment

• Experience with DoD Program, Planning, Budgeting, and Execution or Acquisition Management

Clearance:  

Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information; TS/SCI clearance is required.

Create Your Career:

Grow With Us

Your growth matters to us—that’s why we offer a variety of ways for you to develop your career. With professional and leadership development opportunities like upskilling programs, tuition reimbursement, mentoring, and firm-sponsored networking, you can chart a unique and fulfilling career path on your own terms.

A Place Where You Belong

Diverse perspectives cultivate collective ingenuity. Booz Allen’s culture of respect, equity, and opportunity means that, here, you are free to bring your whole self to work. With an array of business resource groups and other opportunities for connection, you’ll build your community in no time.

Support Your Well-Being

Our comprehensive benefits package includes wellness programs with HSA contributions, paid holidays, paid parental leave, a generous 401(k) match, and more. With these benefits, plus the option for flexible schedules and remote and hybrid locations, we’ll support you as you pursue a balanced, fulfilling life—at work and at home.

Your Candidate Journey

At Booz Allen, we know our people are what propel us forward, and we value relationships most of all. Here, we’ve compiled a list of resources so you’ll know what to expect as we forge a connection with you during your journey as a candidate with us.

Compensation

At Booz Allen, we celebrate your contributions, provide you with opportunities and choices, and support your total well-being. Our offerings include health, life, disability, financial, and retirement benefits, as well as paid leave, professional development, tuition assistance, work-life programs, and dependent care. Our recognition awards program acknowledges employees for exceptional performance and superior demonstration of our values. Full-time and part-time employees working at least 20 hours a week on a regular basis are eligible to participate in Booz Allen’s benefit programs. Individuals that do not meet the threshold are only eligible for select offerings, not inclusive of health benefits. We encourage you to learn more about our total benefits by visiting the Resource page on our Careers site and reviewing Our Employee Benefits page.

Work Model
Our people-first culture prioritizes the benefits of flexibility and collaboration, whether that happens in person or remotely.

• If this position is listed as remote or hybrid, you’ll periodically work from a Booz Allen or client site facility.
• If this position is listed as onsite, you’ll work with colleagues and clients in person, as needed for the specific role.

EEO Commitment

We’re an equal employment opportunity/affirmative action employer that empowers our people to fearlessly drive change – no matter their race, color, ethnicity, religion, sex (including pregnancy, childbirth, lactation, or related medical conditions), national origin, ancestry, age, marital status, sexual orientation, gender identity and expression, disability, veteran status, military or uniformed service member status, genetic information, or any other status protected by applicable federal, state, local, or international law.

The Opportunity: 

When a user tries a new system, they expect it to be intuitive and run smoothly. Functionality, reliability, and user experience are key to successful information systems—and that means rigorous testing. That’s why we need you, an experienced quality assurance analyst who knows how to thoroughly test software and ensure that our team releases the best system possible. As a quality assurance expert, you’ll work with testers, developers, and engineers on a team that evaluates developed systems for an IT modernization effort. You’ll develop and implement manual and automated testing scripts based on application functional requirements and help provide technical leadership and direction to our testing team.

Using a modern automated test framework, you’ll generate problem resolutions and track quality assurance standards to observe how the system performs, then document the results and communicate defects to the development team so they can start improving the tool. You’ll expand upon your experience in various types of testing, including manual, automation, usability, user acceptance testing, and testing process improvement. This is an opportunity to broaden your skills in documenting and solving system deficiencies as well as leading and mentoring others. Work with us to develop technical solutions that improve government services to the public.

Join us. The world can’t wait.  

You Have:

• 6+ years of experience testing or developing software applications, including functional, integration, regression, and performance testing

• 6+ years of experience with testing frameworks such as Selenium

• Experience designing and executing test scripts, test plans, and procedures and documenting the expected and actual results

• Experience creating and updating automated test cases or scripts

• Experience integrating test frameworks with CI/CD pipelines

• Experience with test methodologies, software release cycle, test effort estimation, and tracking

• Experience with Linux or UNIX environments

• Experience generating and managing test data

• Top Secret clearance

• Bachelor’s degree in CS

Nice If You Have:

• Experience with programming in Python, JavaScript or Java

• Experience with Load or Performance testing

• Experience testing Cloud-based architectures

• Experience with an Agile release methodology

• Experience in backend testing, API testing, UI testing, and DB queries

• Ability to work in a fast-paced and collaborative team environment

• Possession of excellent analytical and problem-solving skills

• TS/SCI clearance with a polygraph

• Master’s degree in CS or a technical-related field

Clearance:  

Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information; Top Secret clearance is required.

Create Your Career: 

Grow With Us 

Your growth matters to us—that’s why we offer a variety of ways for you to develop your career. With professional and leadership development opportunities like upskilling programs, tuition reimbursement, mentoring, and firm-sponsored networking, you can chart a unique and fulfilling career path on your own terms.  

A Place Where You Belong 

Diverse perspectives cultivate collective ingenuity. Booz Allen’s culture of respect, equity, and opportunity means that, here, you are free to bring your whole self to work. With an array of business resource groups and other opportunities for connection, you’ll build your community in no time. 

Support Your Well-Being 

Our comprehensive benefits package includes wellness programs with HSA contributions, paid holidays, paid parental leave, a generous 401(k) match, and more. With these benefits, plus the option for flexible schedules and remote and hybrid locations, we’ll support you as you pursue a balanced, fulfilling life—at work and at home.  

Your Candidate Journey 

At Booz Allen, we know our people are what propel us forward, and we value relationships most of all. Here, we’ve compiled a list of resources so you’ll know what to expect as we forge a connection with you during your journey as a candidate with us.  

Compensation

At Booz Allen, we celebrate your contributions, provide you with opportunities and choices, and support your total well-being. Our offerings include health, life, disability, financial, and retirement benefits, as well as paid leave, professional development, tuition assistance, work-life programs, and dependent care. Our recognition awards program acknowledges employees for exceptional performance and superior demonstration of our values. Full-time and part-time employees working at least 20 hours a week on a regular basis are eligible to participate in Booz Allen’s benefit programs. Individuals that do not meet the threshold are only eligible for select offerings, not inclusive of health benefits. We encourage you to learn more about our total benefits by visiting the Resource page on our Careers site and reviewing Our Employee Benefits page.

Work Model
Our people-first culture prioritizes the benefits of flexibility and collaboration, whether that happens in person or remotely.

• If this position is listed as remote or hybrid, you’ll periodically work from a Booz Allen or client site facility.
• If this position is listed as onsite, you’ll work with colleagues and clients in person, as needed for the specific role.

EEO Commitment

We’re an equal employment opportunity/affirmative action employer that empowers our people to fearlessly drive change – no matter their race, color, ethnicity, religion, sex (including pregnancy, childbirth, lactation, or related medical conditions), national origin, ancestry, age, marital status, sexual orientation, gender identity and expression, disability, veteran status, military or uniformed service member status, genetic information, or any other status protected by applicable federal, state, local, or international law.

Job Description Summary

Job Description

We are the makers of possible 

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities. 

We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you’ll be supported to learn, grow and become your best self. Become a maker of possible with us.

DUTIES/RESPONSIBILITIES

• This role is Primarily located in the 100% Final Inspection Area.

• Perform visual inspection on Finish Good product to assure product meets final acceptance criteria according to inspection checklist.

• Measure materials/products using measurement tools and gauges (calipers, height gauge, rulers, pin gauges, etc.) and generate inspection records. Verify information for accuracy. Ensure that BD’s Good Documentation Practices (GDP) are followed.

• Sample and inspect raw materials, sub-assemblies, and final products for conformance to approved specifications.

• Perform and/or assist in First Article Inspections (FAI), Engineering Evaluations, and Defect Analyses.

• Experience with enterprise software; SAP experience strongly desired.

• Assist in managing activities regarding the disposition of non-conforming materials through Quality Notifications (QN); such as generating, routing, recording and the usage decision into SAP.

• Assist in the execution of Equipment Validations (IQ/OQ) and Test Method Validations (TMV) as an operator.

• Assure compliance to the Quality Management System (QMS).

• Able to learn quickly and work with minimal supervision.

• Perform other duties as assigned.

Education and Experience:

• High School diploma required or previous experience.

Knowledge and Skills:

• IPC-A-610 Specialist Certification desirable.

• Knowledge in GD&T

• One or more years of experience working as engineering technician or QC inspector.

• Knowledge in measuring equipment such as calipers, optical comparators, CMMs, height gauges, etc.

• Knowledge in SAP.

• Ability to work in a fast-paced environment. 

• Knowledge of GMP/SOP/Work Instructions and be able to develop techniques to ensure adherence to quality standards.   

• Ability to work well with others and direct their work activities as required.

• Good analytical skills. 

• May be required to work a flexible schedule. 

For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.

Why Join Us?

A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.  

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place.  

To learn more about BD visit https://bd.com/careers 

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status. 

Primary Work Location

Additional Locations

Work Shift

At BD, we are strongly committed to investing in our associates—their well-being and development, and in providing rewards and recognition opportunities that promote a performance-based culture.  We demonstrate this commitment by offering a valuable, competitive package of compensation and benefits programs which you can learn more about on our Careers Site under Our Commitment to You.

Salary ranges have been implemented to reward associates fairly and competitively, as well as to support recognition of associates’ progress, ranging from entry level to experts in their field, and talent mobility. There are many factors, such as location, that contribute to the range displayed. The salary offered to a successful candidate is based on experience, education, skills, and actual work location. Salary ranges may vary for Field-based and Remote roles.

Salary Range Information

Job Description Summary

Job Description

We are the makers of possible 

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities. 

We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you’ll be supported to learn, grow and become your best self. Become a maker of possible with us. 

DUTIES/RESPONSIBILITIES

• This role is Primarily located in the 100% Final Inspection Area.

• Perform visual inspection on Finish Good product to assure product meets final acceptance criteria according to inspection checklist.

• Measure materials/products using measurement tools and gauges (calipers, height gauge, rulers, pin gauges, etc.) and generate inspection records. Verify information for accuracy. Ensure that BD’s Good Documentation Practices (GDP) are followed.

• Sample and inspect raw materials, sub-assemblies, and final products for conformance to approved specifications.

• Perform and/or assist in First Article Inspections (FAI), Engineering Evaluations, and Defect Analyses.

• Experience with enterprise software; SAP experience strongly desired.

• Assist in managing activities regarding the disposition of non-conforming materials through Quality Notifications (QN); such as generating, routing, recording and the usage decision into SAP.

• Assist in the execution of Equipment Validations (IQ/OQ) and Test Method Validations (TMV) as an operator.

• Assure compliance to the Quality Management System (QMS).

• Able to learn quickly and work with minimal supervision.

• Perform other duties as assigned.

Education and Experience:

• High School diploma, preferred

• Minimum one year experience working as engineering technician or QC inspector

Knowledge and Skills:

• IPC-A-610 Specialist Certification desirable.

• Knowledge in GD&T.

• Knowledge in measuring equipment such as calipers, optical comparators, CMMs, height gauges, etc.

• Knowledge in SAP.

• Ability to work in a fast-paced environment. 

• Knowledge of GMP/SOP/Work Instructions and be able to develop techniques to ensure adherence to quality standards.   

• Ability to work well with others and direct their work activities as required.

• Good analytical skills. 

For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.

Why Join Us?

A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.  

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place.  

To learn more about BD visit https://bd.com/careers 

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status. 

Primary Work Location

Additional Locations

Work Shift

At BD, we are strongly committed to investing in our associates—their well-being and development, and in providing rewards and recognition opportunities that promote a performance-based culture.  We demonstrate this commitment by offering a valuable, competitive package of compensation and benefits programs which you can learn more about on our Careers Site under Our Commitment to You.

Salary ranges have been implemented to reward associates fairly and competitively, as well as to support recognition of associates’ progress, ranging from entry level to experts in their field, and talent mobility. There are many factors, such as location, that contribute to the range displayed. The salary offered to a successful candidate is based on experience, education, skills, and actual work location. Salary ranges may vary for Field-based and Remote roles.

Salary Range Information

Job Description Summary

Job Description

We are the makers of possible 

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities. 

We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you’ll be supported to learn, grow and become your best self. Become a maker of possible with us. 

Job Description:

• Configures, validates, deploys, and administrates quality related software systems.

• Composes and implements validations for CSD&V and AME applications.

• Functions as a domain expert in software validation, provides mentorship, and reviews software development/validation documents written by other individuals.

• Applies compliance and notification trends to identify areas of manufacturing improvement using product knowledge, existing specifications, and engineering principles. 

• As needed, develops and employs technical understanding of product characteristics and functional end-use in order to optimally investigate complaint trends or other targeted product functionality improvements.

• Applies problem solving processes to site quality issues and sources potential software related solutions. Effectively manages project timelines and communicates updates to collaborators.

• Crafts and coordinates training and procedures related to compliance and quality software packages. Builds or modifies plant control plans with process remediation activities.

• Leads or participates on multi-functional process remediation and improvement teams as assigned by local quality management.

• Independently identifies process improvement opportunities and implements software solutions.

Qualifications:

Education/Experience Required:

• BS Degree in Computer Science, Engineering, or a related field

• Accomplished experience and knowledge may be considered in lieu of a degree.

• Experience in medical device, pharmaceutical, or related manufacturing is required.

Preferred:

• Understanding of software/process validation and quality theories

• Six Sigma Certification

• Statistical Process Control Certification (SPC)

• Good Manufacturing Practices knowledge (GMP)

For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.

Why Join Us?

A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.  

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place.  

To learn more about BD visit https://bd.com/careers 

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.
 

PDN

#earlytalent

#ET

Primary Work Location

Additional Locations

Work Shift

Job Description Summary

Job Description

We are the makers of possible 

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities. 

We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you’ll be supported to learn, grow and become your best self. Become a maker of possible with us. 

DUTIES/RESPONSIBILITIES

• This role is Primarily located in the 100% Final Inspection Area.

• Perform visual inspection on Finish Good product to assure product meets final acceptance criteria according to inspection checklist.

• Measure materials/products using measurement tools and gauges (calipers, height gauge, rulers, pin gauges, etc.) and generate inspection records. Verify information for accuracy. Ensure that BD’s Good Documentation Practices (GDP) are followed.

• Sample and inspect raw materials, sub-assemblies, and final products for conformance to approved specifications.

• Perform and/or assist in First Article Inspections (FAI), Engineering Evaluations, and Defect Analyses.

• Experience with enterprise software; SAP experience strongly desired.

• Assist in managing activities regarding the disposition of non-conforming materials through Quality Notifications (QN); such as generating, routing, recording and the usage decision into SAP.

• Assist in the execution of Equipment Validations (IQ/OQ) and Test Method Validations (TMV) as an operator.

• Assure compliance to the Quality Management System (QMS).

• Able to learn quickly and work with minimal supervision.

• Perform other duties as assigned.

Education and Experience:

• High School diploma, preferred

• Minimum one year experience working as engineering technician or QC inspector

Knowledge and Skills:

• IPC-A-610 Specialist Certification desirable.

• Knowledge in GD&T.

• Knowledge in measuring equipment such as calipers, optical comparators, CMMs, height gauges, etc.

• Knowledge in SAP.

• Ability to work in a fast-paced environment. 

• Knowledge of GMP/SOP/Work Instructions and be able to develop techniques to ensure adherence to quality standards.   

• Ability to work well with others and direct their work activities as required.

• Good analytical skills. 

For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.

Why Join Us?

A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.  

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place.  

To learn more about BD visit https://bd.com/careers 

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status. 

Primary Work Location

Additional Locations

Work Shift

At BD, we are strongly committed to investing in our associates—their well-being and development, and in providing rewards and recognition opportunities that promote a performance-based culture.  We demonstrate this commitment by offering a valuable, competitive package of compensation and benefits programs which you can learn more about on our Careers Site under Our Commitment to You.

Salary ranges have been implemented to reward associates fairly and competitively, as well as to support recognition of associates’ progress, ranging from entry level to experts in their field, and talent mobility. There are many factors, such as location, that contribute to the range displayed. The salary offered to a successful candidate is based on experience, education, skills, and actual work location. Salary ranges may vary for Field-based and Remote roles.

Salary Range Information

About Us:

How many companies can say they’ve been in business for over 177 years?!

Here at ZEISS, we certainly can! As one of the pioneers of science, ZEISS handles the everchanging environment of our fast-paced world, meeting it with cutting edge technologies and continuous advancements. ZEISS believes that innovation and technology are the key to a sustainable future and solutions for global change. We have a diverse range of portfolios throughout the ZEISS family in segments like, Industrial Quality & Research, Medical Technology, Consumer Markets and Semiconductor Manufacturing Technology. We are a global company with over 42,000 employees and with over 4,000 in the US and Canada alone! Make a difference, come join the team!

What’s the role?

As a Field Service Technician, you get to work with an astonishing team that plays a vital role in Carl Zeiss Industrial Quality Solutions, LLC. Show case your skills and experience by process enhancements focused on installation and servicing of custom equipment. You will interact with customers and cross functional service groups that support and launch ZEISS products into the field. Additionally, you will aid the R&D team with engineering work in relation to design, build, and new system testing. This position will also support the production of systems during various stages of assembly and setup.

Sound Interesting?

Here’s what you’ll do:

• Install, Repair, Troubleshoot, Service and Calibrate high tech machines at customer locations.

• Demonstrate customer service skills and knowledge with a high level of passion and dedication.

• Demonstrate your ability to learn new skills on high tech CMM’s (Coordinate Measuring Machines) utilizing mechanical and electronic aptitude.

• Perform necessary administrative paperwork in a complete and accurate manner.

• Be Solutions-oriented with the ability to work independently in a high pressure, fast-paced and innovative environment.

• Travel requirement is 90-100% within the service area, including international travel as needed.

• Other duties as required.

Do you qualify?

• Minimum, High School graduate, completed GED or equivalent.

• Or, Tech School, associate, or bachelor’s degree in a technical discipline such as, Electronics, Industrial Mechanics, and the like.

• Or, Training and experience from a Military Technical School.

• Prior experience working with hand tools and basic electrical test equipment.

• Microsoft operating system knowledge is required.

• Capable of unassisted physical lift of one article weighing up to 75 pounds.

• Able and willing to work minimum of 50 hours per work week. Regular + OT.

• Ability to work in an industrial production shop floor environment.

• Valid Driver License required.

• Excellent communication and customer service aptitude.​

Nice to haves:

• Previous experience installing and troubleshooting industrial electronics, machines, or computer systems.

• Previous CMM (Coordinate Measuring Machine) installation and troubleshooting experience is preferred however not required.

Your ZEISS Recruiting Team:

Zeiss provides Equal Employment Opportunity without unlawful regard to an Applicants race, color, religion, creed, sex, gender, marital status, age, national origin or ancestry, physical or mental disability, medical condition, military or veteran status, citizen status, sexual orientation, pregnancy (includes childbirth, breastfeeding or related medical condition), genetic predisposition, carrier status, gender expression or identity, including transgender identity, or any other class or characteristic protected by federal, state, or local law of the employee (or the people with whom the employee associates, including relatives and friends).