Total 96 engineering job vacancies in mather afb california

• Serves as management consultant on aircraft production process, equipment, tooling and their subsystem design, operations, modification, and replacement.
• Accomplishes research and investigations to determine appropriate Non-Destructive Inspection (NDI) techniques for any aircraft structure, engine and their subcomponents.
• Works with organizational managers, budget personnel, and engineering authorities to develop and gain approval for proposed NDI equipment and tooling programs/projects.

• Plans and administers service contracts relating to base maintenance, repair, and recurring service requirements.
• Technical representative for contracting officer. Interprets and clarifies plans, specifications, and other proposal documents.
• Provides information and advice to construction agents concerning contractor services, products, and requirements on a regular basis.
• Develops and implements a contract quality assurance inspection schedule for all contract services acquired.
• Summarizes results of evaluations of contract performance and calculates recommended changes in payment as required; prepares funding estimates and all supporting data in connection with justification of budget requirements to support all acquired contract services and modifications to contracts.

• Uses a variety of contracting processes to provide engineering oversight for construction, architecture, or engineering contracts.
• Prepare and maintain project documentation, such as logs, reports, photographs, correspondence, status reports, record of meetings, conversations, etc.
• Evaluate architecture/engineering studies, plans and specifications to determine constructability, conformance with project scope, and agency requirements.
• Conducts inspections and assessments, including condition assessments of civil works facilities, buildings, mechanical and electrical systems, transportation infrastructure, and construction site conditions.
• Serves as the Contracting Officer's Representative (COR) to implement and administer a variety of contracts.

Continued from Summary: The primary purpose of this position is to ensure optimal resource decisions are made and executed across civil engineer activities and ensure data and information from all shops are applied to the applicable Asset Management Plan (AMP) and other investment and execution plans. Utilize proactive data and information from Sustainment Management Systems to conduct performance analysis, risk-based sustainment decision making, resource optimization, and life-cycle requirements planning. Additionally, serve as an interface with customers to collect and validate user requirements. Perform Preventive Maintenance analysis and planning; corrective maintenance analysis and planning; and provide support to the Engineering Flight (CEN) on cradle-to-grave project execution within a Civil Engineer Squadron at an installation.

Duties/Responsibilities:

• Manages and executes Asset Management Plans (AMP) and/or Sub-Asset Management Plans (Sub-AMP) for entire installation.
• Integrates and synchronizes Operations Flight work force for Sustainment Management Systems (SMS) data standards, collection, and analysis.
• Integrates and synchronizes Operations Flight work force for preventive maintenance (PM).
• Integrates and synchronizes Operations Flight contract project development, review, construction, and integration, and warranty management pertaining to respective portfolio.

• You will prepare, lift, and move missiles and test assets for scheduled flight and ground events.
• You will handle and transport weapons on station using trucks, fork trucks, and cranes as required.
• You will assist with planning, coordination, and monitoring of in-house test and evaluation projects for Technical Project Offices (TPOs) at China Lake.
• You will assist engineers and contractors in the testing and integration of developmental software or missile components in accordance with publication manuals or approved SOPs.
• You will interact with test squadrons, TPOs, contractors, as well as on station and off station organizations in the movement, handling, and testing of flight weapons and weapon test vehicles.
• You will assist in the management of ordnance inventory for all explosive items in support of the TPO program to which you are assigned.

• Manages and executes Asset Management Plans (AMP) and/or Sub-Asset Management Plans (Sub-AMP) for entire installation.
• Integrates and synchronizes Operations Flight work force for Sustainment Management Systems (SMS) data standards, collection, and analysis.
• Integrates and synchronizes Operations Flight work force for preventive maintenance (PM). Manages PM program in the appropriate approved IT system (e.g. NexGen IT/ACES-WIMS) and maintains records IAW prescriptive requirements.
• Integrates and synchronizes Operations Flight contract project development, review, construction, and integration, and warranty management pertaining to respective portfolio.

• Provides administrative and technical guidance to the office staff and other field offices.
• Prepares contract modifications initiated in the field for unlimited dollar amounts.
• Performs or directs a variety of related duties.

• You will be responsible for project management oversight of facilities projects supporting Sustainment, Restoration and Modernization (SRM), 233 initiative, and earthquake recovery work.
• You will be responsible for oversight of construction processes from project induction through construction completion, for a variety of complex projects and for conventional facilities and installations.
• You will coordinate necessary permits for construction (dig permits, utility locates, etc.) as well as necessary certifications for elevators, fire protection, and cranes.
• You will interact with activity service providers to ensure program requirements are met.
• You will use a variety of tools and trade practices, such as carpentry, masonry, plumbing, cement work, painting, flooring, framing, roofing, t-bar/ceiling grid, door, and window installation and repairs.

1. Plans and administers service contracts relating to base maintenance, repair, and recurring service requirements.

2. Technical representative for contracting officer. Interprets and clarifies plans, specifications, and other proposal documents.

3. Provides information and advice to construction agents concerning contractor services, products, and requirements on a regular basis.

4. Develops and implements a contract quality assurance inspection schedule for all contract services acquired.

5. Summarizes results of evaluations of contract performance and calculates recommended changes in payment as required.

6. Prepares funding estimates and all supporting data in connection with justification of budget requirements to support all acquired contract services and modifications to contracts.

1. Plans and administers service contracts relating to base maintenance, repair, and recurring service requirements.

2. Technical representative for contracting officer. Interprets and clarifies plans, specifications, and other proposal documents.

3. Provides information and advice to construction agents concerning contractor services, products, and requirements on a regular basis.

4. Develops and implements a contract quality assurance inspection schedule for all contract services acquired.

5. Summarizes results of evaluations of contract performance and calculates recommended changes in payment as required.

6. Prepares funding estimates and all supporting data in connection with justification of budget requirements to support all acquired contract services and modifications to contracts.

• Develops business case for new depot equipment, facility systems, and utilities; and for upgrade, repair, and maintenance requirements of each.
• Develops, manages, and conducts engineering and technical group related training programs.
• Maintains surveillance over construction contractors to ensure overall compliance with contract specifications, schedules, etc.
• Takes the lead in performing project management planning, design, and troubleshooting work for establishing new industrial workload plans and for modifying existing workload layouts as needed.
• Coordinates projects with other engineering disciplines or with architects.
• Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

The primary duties of this position are:

• Serves as first line supervisor.
• Identifies priorities and reviews, monitors, coordinates, and assesses work assignments of staff.
• Ensures equal opportunity for employees in hiring, selection for training, promotion, awards, and other career development opportunities.
• Plans, organizes, and conducts materials investigation and testing programs as the technical expert and authority on matters of construction materials.
• Collaborates directly with Project, Regional, and Denver Office engineers, designers, and geologists in resolving issues and verifying engineering decisions.
• Plans, organizes, directs, and conducts all earth and concrete control testing, inspection of pipe manufacturing, and laboratory activities.
• Arranges for the establishment of field laboratories at various remote locations to accomplish construction control and testing. Ensures set up and calibration of testing equipment.
• Performs materials tests and reporting for construction activities including, but not limited to, the following: Concrete and aggregate production facilities, tests earthen works, borrow area investigations, etc.
• Develops and implements an internal management process for coordinating and scheduling laboratory staff systems.
• Implements soil investigation procedures and advises Regional personnel on field testing techniques and methodology for determining soil types, quantities, and physical characteristics of materials available for construction of facilities at various locations.

• You will be responsible for technical and repair support of diversified and complex shipboard techniques and processes relating to Ships Systems.
• You will provide engineering support for the planning, execution, and closeout of depot level availabilities on surface ships.
• You will plan work and assign tasks to subordinates, set priorities and approve work schedules.
• You will evaluate performance of personnel, mentor, give advice and counsel on work and administrative matters.
• You will prepare, submit and justify the Branch's tasking agreements with other commands.
• You will manage branch finances to ensure proper utilization and expenditures.

The primary duties of this position are:

• Serves as first line supervisor.
• Identifies priorities and reviews, monitors, coordinates, and assesses work assignments of staff.
• Ensures equal opportunity for employees in hiring, selection for training, promotion, awards, and other career development opportunities.
• Plans, organizes, and conducts materials investigation and testing programs as the technical expert and authority on matters of construction materials.
• Collaborates directly with Project, Regional, and Denver Office engineers, designers, and geologists in resolving issues and verifying engineering decisions.
• Plans, organizes, directs, and conducts all earth and concrete control testing, inspection of pipe manufacturing, and laboratory activities.
• Arranges for the establishment of field laboratories at various remote locations to accomplish construction control and testing. Ensures set up and calibration of testing equipment.
• Performs materials tests and reporting for construction activities including, but not limited to, the following: Concrete and aggregate production facilities, tests earthen works, borrow area investigations, etc.
• Develops and implements an internal management process for coordinating and scheduling laboratory staff systems.
• Implements soil investigation procedures and advises Regional personnel on field testing techniques and methodology for determining soil types, quantities, and physical characteristics of materials available for construction of facilities at various locations.

• Applies extensive knowledge of industrial engineering processes to perform long-range pre-production planning for prime and support workload requirements relevant to depot maintenance.
• Develops/revises standards including labor, material, equipment and facilities for operations cards, labor, and material standards necessary for documentation of work requirements on engine workload and subsequent analysis for refinement.
• Determines the impact of proposed workload changes by planning acceleration or deceleration of production schedules.
• Attends provisioning conferences for material and equipment.