Total 23 quality assurance control job vacancies in tower b eon free zone ii

• Melakukan pengecekan check sheet dari bagian produksi
• Melakukan repair barang

Quality Staff (Quality Assurance/Quality Control) 

Mendukung Head of Quality dalam melakukan pengawasan dan tanggung jawab untuk memonitor Quality Department Performance: Penyusunan produk defect termasuk laporan tindakan perbaikan/pencegahan kepada Pelanggan, penyempurnaan rencana sistem Quality Control/ Quality Assurance untuk menjamin kepuasan Pelanggan melalui kualitas produk, Klaim Pelanggan, menindaklanjuti dan berkoordinasi untuk penolakan dari inspeksi pengiriman, penanganan Kontrol Pemasok, dll 

Tugas Pekerjaan:

• Mempersiapkan Audit Eksternal/Internal (Audit ISO/Audit Pelanggan/Audit Perusahaan Grup)
• Melakukan verifikasi klaim pelanggan barang dikembalikan, menyediakan & membantu produksi dalam Kualitas Produk
• Memantau umpan balik kualitas produk bersama dengan tim produksi untuk menjaga kualitasnya
• Memantau dan memverifikasi keluhan pelanggan untuk menganalisis akar penyebab peningkatan kualitas
• Melakukan uji coba untuk sampel baru atau pemasok baru untuk memenuhi spesifikasi kualitas
• Mengembangkan SOP, WI untuk peningkatan proses terkait kualitas dan pengetahuan standar untuk produk baru
• Mengembangkan dan menetapkan spesifikasi kualitas untuk produk
• Mengawasi kualitas lini produksi.
• Menganalisis masalah kualitas yang ditemukan di lapangan.
• Berkoordinasi dengan departemen terkait mengenai masalah kualitas yang ada.
• Melaksanakan dan memantau hasil keputusan terhadap kualitas hasil produksi
• Buat rencana aksi untuk menghilangkan masalah – PICA (Continual Improvement)
• Menyiapkan laporan dan menandatangani dokumen sesuai prosedur yang ada
• Membuat laporan kualitas mingguan/bulanan

 

Persyaratan:

• Kandidat harus memiliki setidaknya Gelar Sarjana di Teknik Metalurgi, Teknik Industri, Teknik Mesin atau terkait dari universitas terkemuka.
• Setidaknya 3 Tahun pengalaman kerja di bidang terkait diperlukan untuk posisi ini.
• Memiliki keahlian di bidang teknik mesin terutama dalam sistem otomasi, desain bagian/mekanisme bergerak kecil, robotika presisi tinggi, proses manufaktur, dan mekatronik.
• Akurat, perhatian terhadap detail, bijaksana, dan cepat belajar adalah suatu keharusan.
• Memiliki keterampilan interpersonal, kepemimpinan, dan resolusi konflik yang sangat baik.
• Memiliki kreativitas, logika, visi, dan keterampilan pemecahan masalah yang luar biasa.
• Memiliki kemampuan komunikasi yang baik dalam bahasa Inggris baik lisan maupun tulisan.
• Bersedia bekerja di Tangerang, Banten

 

Pertanyaan dari perusahaan

SEN Quality Assurance Manager

Service care Solution are currently recruiting for a SEN Quality Assurance Manager in Tower Hamlets

The SEN Quality Assurance Manager will manage and lead the SEND Quality Assurance Framework and processes in ensuring high quality Education, Health and Care Plans (EHCPs) for children and young people with Special Educational Needs and/ or Disabilities (SEND).

Pay rate - £266.24 per day / £350 ltd (umbrella)

Main Responsibilities

As a SEN Quality Assurance Manager, you will be responsible for:

• To oversee the processes within the Quality Assurance Framework, continually improving the quality of advice provided for, and quality of issued, EHCPs following assessment and review.
• To support the SEND Service Manager in reporting on the quality of EHCPs to the SEND Improvement Board through audits and findings of the Quality Assurance Group.
• To deliver training and tools to the SEND Service regarding coproduction, keeping the child/young person at the heart of a person-centred approach and having regard to the voice of the child/young person and the aspirations of the family at all times.

Requirements:

• Enhanced DBS
• Experience in a similar role
• An extensive knowledge of the Children and Families Act 2014 and the associated SEND Code of Practice.

Working with Service Care Solutions comes with many benefits, including:

• A specialist consultant within an experience and dedicated recruitment team
• Excellent rates of pay
• Payroll services twice a week

If you are interested in the SEN Quality Assurance Manager role, or know of anyone who may be, please contact Emma at Service Care Solutions on 01772 208964 or email emma.petricco@servicecare.org.uk

Service Care Solutions also offers a £250 referral bonus! So if you know of anyone who would be perfect for this position and they are placed into work, you will receive £250 for the referral once their probationary period has been completed!

1. Perencanaan

a.Merencanakan fasilitas akomodasi (Mess) untuk staff/pekerja di site, jika client tidak memfasilitasi hal tersebut.

b.Menetapkan langkah dan strategi link untuk memenuhi pekerja (seputaran lokasi proyek) yang dibutuhkan di lokasi sesuai permintaan Client dengan berkoordinasi dengan Disnaker/Kepala Desa/Tokoh adat/dll setempat.

c.Membuat strategi proses yang berkaitan dengan karyawan pekerja proyek menyangkut kesehatan (P3K), tenaga kerja (BPJS), dll.

d. Bersama dengan klien menyusun kebutuhan tenaga kerja serta jadwal kebutuhan tenaga kerja tersebut diperlukan di site.

2. Pelaksanaan

a. Melakukan proses recruitment pekerja di lapangan untuk memenuhi permintaan Client.

b. Melengkapi administrasi seperti absensi pekerja, segala macam perjanjian, surat menyurat terkait kelengkapan di proyek, BPJS dll.

c.Melengkapi kebutuhan safety pekerja (jika tidak disediakan oleh Client) bersama sama dengan Site Coordinator bagi pekerja di lapangan.

d. Membuat rekapitulasi absensi pekerja berdasarkan daily basis pekerja yang menjadi dasar sistem penggajian serta dilaporkan ke kantor pusat.

e.Membuat Database karyawan (dilengkapi dengan alamat/mobile phone) dilengkapi dengan performancenya selama bekerja di proyek (bersama dengan Site Coordinator) tersebut.

Reporting Line

• This position reports to the QHSEE Team Leader

Primary Responsibilities    

• Assists the QHSEE Team Leader in the securing of government licenses and permits of the various OGC operations, coordinating in the Division’s training programs and updating of learning and development records of OGC members. Acts as a Deputy Quality Manager, in the absence of the QHSEE Team Leader. Also acts as Deputy Document Controller.

Specific Responsibilities   

• Prepare training materials and facilitates training, if necessary
• Reserve resources needed for the training such as conference room, projector, trainer, etc.
• Facilitate the corporate trainings of newly hired NR-OGC employees on the following topics: ISO 17020/ISO 17025/9001 Awareness Training, Employee Induction, Basic Safety, Crystal, etc.
• Assist the Document Controller in ensuring that documented information:

• are created, reviewed and updated as necessary.
• external documents are distributed accordingly and obsolete copies are timely retrieved
• ensuring that SharePoint Repository and other monitoring reports are kept updated

• Assists the Quality Manager in ensuring the compliance of NR- OGC division thru the following:

• Coordinate with site/lab heads and/ or pollution control officers in securing the requirements for application/ renewal of license/ permit as well as preparation of reports as necessary
• Monitor license/ permit validity and ensure renewal within the lead-time period
• Monitor reports and requirements and ensure submission before deadline
• Act as site Pollution Officer, if necessary

• Consolidate, monitor, update and report Division’s Key performance Indicator, Safety Reports, Customer -related performance report and Training Tracker and ensure timely submission.
• Conduct trainings, audits, inspections, and other QHSEE-related tasks.
• Participates in incident investigations involving personnel within the function line by doing root cause analysis and or other related quality methodologies.

• Performs other related duties as may be assigned to achieve respective section’s goals or for own personal, or professional training, education or development as programmed by the immediate supervisor.
• Complies with the Quality, Health and Safety, Environment and Energy (QHSEE) policies and supporting objectives including, but not limited to:

• Demonstrates strong obligation to SGS QHSEE policies, procedures and work instructions by actively participating in             meetings, projects and events, completes required training, intervenes in unsafe situations, refuses unsafe work, and complies fully with all applicable laws and regulations related to HSEE
• Perform appropriately and immediately to emergency situations and assists other staff members in maintaining readiness to respond to emergencies within the workplace
• Disposes or directs the disposal of waste generated as a part of daily work performed in a safe manner and in compliance with the disposal regulations and requirements, and in accordance with SGS Environmental Management System requirements
• Reports all incidents, including near misses and hazards, that may affect the achievement of QHSEE objectives in accordance with SGS Incident Reporting and Management requirements
• Efficiently uses all equipment, including safety equipment, and company owned property in the manner intended and reports any damaged / lost equipment to immediate superior
• Maintains a safe and tidy worksite according to the organization’s 5S program and guidelines
• Maintains awareness of the safety and health related hazards and environmental aspects and proposes action plans to control the risks to immediate superior or QHSEE Coordinators
• Actively participates in incident investigations and risk assessments as deemed necessary by SGS management
• Fulfills the requirements needed in the success of the QHSEE Management System
• Recognizes the potential consequences of not following the established policies, procedures, and guidelines, including not fulfilling the organization’s compliance obligations

We have a fantastic opportunity to join our award winning team here at eStar as Head of Workshop Control, based in our Mercedes-Benz dealership located in Deeside!

This is an important role within the service team and is responsible for controlling the flow of work through the workshop to maximise its utilisation and ensure that Technicians are working efficiently.

We are looking for someone with a technical background, strong organisation skills and a proactive approach to ensure the smooth running of the workshop.

Package Details:

£35,000 - £38,500, depending on experience
Based onsite in Deeside
42.50 hours per week, Monday - Friday, 07:30 - 17:00
23 days’ holiday each year plus bank holidays
Permanent
Bonus scheme

Benefits:

Additional leave
Bereavement leave
Company events
Company pension
Cycle to work scheme
Discounted car scheme
Discounted gym membership
Enhanced maternity leave
Enhanced paternity leave
Free on-site parking
Long service awards
Paid volunteer time
Referral programme
Sick pay

Key Purpose of the Job:

To control the flow of work through the workshop to maximise its utilisation and ensure that technicians are working efficiently
To ensure that all company policies and procedures applicable to their area of responsibility are adhered to at all times

Accountabilities:

Receive job cards from service reception, pre-time each job and allocate work to Technicians

Obtain authorisation for any additional work required either through service reception or by direct contact with customer

Ensure that all warranty items are identified for each job and that parts replaced are labelled, appropriate documentation completed and passed for action

Receive job cards for completed jobs ensuring that work has been completed correctly; time completed jobs so that job costing can be completed, and ensuring all warranty items are highlighted and all associated documentation is completed

Arrange for customer to be informed that vehicle has been completed

Ensure that the image and levels of customer service within the department is in line with Company standards

Schedule all PDI and used car preparation to ensure that sales department requirements are met

Ensure that all special tools and equipment are kept in good order and that repair requirements are addressed

Ensure that the workshop is kept clean and tidy at all times

Ensure that all customer complaints are dealt with both speedily and effectively

Supervision of the team to ensure that designated duties are performed correctly, highlighting any improvement areas to their immediate supervisor

Identify training requirements for workshop team and Technical Specialists

Ensure that within their area of operation all Company and Trade Associations policies, procedures and minimum standards are met and that all statutory requirements including trading standards, vehicle and consumer legislation, fire, health and safety etc. are adhered to

Handle all internal and external customers and suppliers with courtesy and ensure the Mercedes-Benz experience is delivered to all contacts at all times

Skills and Competencies Required:

Previous experience as a Senior Technician
Strong technical background
Full understanding of Standard Text Times and Warranty procedures
Enthusiasm to deliver the Mercedes Benz customer experience
Strong administration skills
Strong organisation skills
Ability to work effectively within a team environment
Flexible approach to work and adaptable to thrive in a changing environment
IT literate

The Compliance Business Control Officer (MCA Coordinator) reports to a Business Operational Risk Manager (MCA Lead), who is aligned with our business partners and one or more business Assessment Units to help appropriately manage risks arising from our products, services, and business operations. This person will work alongside the MCA Lead to ensure effective risk management is embedded in day-to-day business strategies, and related activities, focusing on strengthening MCA and infusing consistency to the design of Activity, Risk, Control and Monitoring (ARCM) frameworks and execution of ARA and periodic Risk Assessments. This role demands significant coordination across internal business teams and other support and control groups within the organization. Developed communication and diplomacy skills are required to guide, influence, and convince others, in particular colleagues in other areas.

Key Responsibilities:

• Partner with Process Owner to evaluate process activity, conduct risk assessments, and design adequate controls to be executed by Process Owner
• Engage with 2nd line partners to confirm regulatory & operational risks are identified and proper controls are in place.
• Coordinate, analyze and follow-up actions related to ORM/ICRM reviews and challenges.
• Support centralized monitoring team(s) with design of monitoring in-line with design of control.
• Lead, coordinate, and document MCA/ARA elements (e.g., Inherent Risk, Taxonomy, etc.) with ICRM, process & control owners, and monitoring teams
• Facilitate periodic Risk Assessment & ARA review sessions with AU / MGE Owner
• Input and update of content to data repositories such as CR&C and MCA Center for ARCM, ARA and periodic Risk Assessment execution, maintenance, and enhancement
• In partnership with process owners, create plans to reduce residual risks.
• Coordinate SMP/EMP applicability assessment and adoption with business, control, and monitoring owners
• Support process owners on Change Initiatives risk evaluations, Issue Management, and Internal/External reviews
• Partner with business process owner to ensure timely action on process or monitoring fails, trends, operational losses, open issues, and action plans from ineffective control.
• Assumes leadership role in ensuring all Citi Risk & Controls (GRC) changes, issues and requirements are cascaded, executed, and closed out.  This includes a range of responsibilities such as standard / enterprise control profile adoption, periodic Risk Assessment requirements, ARA requirements system access reviews, migrations, and change management.
• Independently assess risks and drive actions to address the root causes that persistently lead to operational risk losses by challenging both historical and proposed practices.
• Develop and maintain relationships across the business users and Lines of Defense to better understand and deliver customer requirements by responding to changes in the internal and external business environment.
• Has the ability to operate with a limited level of direct supervision.
• Can exercise independence of judgement and autonomy.

Qualifications:

• 6+ years relevant experience
• Financial Industry experience is a must, Operational Risk would be a plus.
• Project Management Experience
• Experience in Internal Audit or Financial Control would be desirable.
• Expertise in the following would be beneficial: Fraud Awareness and Risk Management Operations and Systems (Information Security Standards, Vendor/Outsourcing Management and MCA Legal and Regulatory Compliance Management of a global operations and a complex environment that includes global teams.

Education:

• Bachelor’s/University degree, Master’s degree preferred

-------------------------------------------------

Job Family Group:

Risk Management

-------------------------------------------------

Job Family:

Operational Risk

------------------------------------------------------

Time Type:

Full time

------------------------------------------------------

Primary Location:

New York New York United States

------------------------------------------------------

Primary Location Salary Range:

$129,840.00 - $194,760.00

------------------------------------------------------

Citi is an equal opportunity and affirmative action employer.

Qualified applicants will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Citigroup Inc. and its subsidiaries ("Citi”) invite all qualified interested applicants to apply for career opportunities. If you are a person with a disability and need a reasonable accommodation to use our search tools and/or apply for a career opportunity review Accessibility at Citi.

View the "EEO is the Law" poster. View the EEO is the Law Supplement.

View the EEO Policy Statement.

View the Pay Transparency Posting

Ciena is committed to our people-first philosophy. Our teams enjoy a culture focused on prioritizing a personalized and flexible work environment that empowers an individual’s passions, growth, wellbeing and belonging. We’re a technology company that leads with our humanity—driving our business priorities alongside meaningful social, community, and societal impact.

Not ready to apply? Join our Talent Community to get relevant job alerts straight to your inbox.

Why Ciena:

· We are big proponents of life-work integration and provide the flexibility and tools to make it a reality with remote work and potentially, part-time work.

· We believe an inclusive, diverse and barrier-free work environment makes for empowered and committed employees.

· We recognize the importance of well-being and offer programs and benefits to support and sustain the mental and physical health of our employees and their families and offer a variety of paid family leave programs.

· We are committed to employee development, offering tuition reimbursement and a variety of in-house learning and mentorship opportunities.

· We know that financial security is important. We offer competitive salaries and incentive programs, RSU’s (job level specific) and an employee share option purchase program.

· We realize time away to recharge is non-negotiable. We offer flexible paid time off!

· Great work deserves recognition. We have a robust recognition program, with ongoing and enhanced awards for exemplary performance.

How You will Contribute:

Join our highly experienced team of engineers delivering: ​

• Next Generation Packet Optical Transport Solutions

• Next Generation Routing and Switching Solution

• Hybrid Layer 0/1/2 switching (OTN/Packet)

• Data Driven North Bound Open Interfaces – YANG/NETCONF/gRPC/REST.

• Solutions enabling Wireless, 5G, SDN, NFV and Virtualized oriented networks.

• Participate in all stages of software development, including requirements analysis, design, implementation, test, and maintenance.

• Detailed design of various features related to Ciena's Packet Optical Portfolio.

• Troubleshoot hardware and software issues and work with hardware, software and verification engineers to identify the root cause and implement solutions.

• Identify root cause, debug & deliver robust timely fixes.

• Provide basic status reporting for own work or that of a small team.

• You are expected to mentor junior engineers and guide them to success.

What Does Ciena Expect of You?

• · Initiative – You’re a self-starter who works with limited direction and is committed to delivering against aggressive deadlines.

• · Agility – you are readily able to make key decisions and manage competing and ever-changing account priorities and largely driven by the product development lifecycle.

• · Communication expertise – the ability to influence and tailor your message and ideas in both English and French to the audience to ensure understanding and consensus.

• · The flexibility to work independently and as part of a broader team – you thrive in a multi-disciplinary team environment, but are comfortable working independently as required.

• · Relationship builder – with a proven ability to influence, you’re able to get work done through others.

• · A commitment to innovation – you keep abreast of the market and competitive developments and are always keen to formulate new ideas and problem solve.

The Must Haves:

• Expertise in OTN Transport, DWDM, Switching, Control Plane technologies, Automation Development using TCL/Python. Exposure to photonics/DWDM, NMS and packet technologies would be a plus.

• Ability to understand customers’ needs, expectations, and perspective. Knowledge of Transport Network Design of Telecom Service Providers and Content Provider Networks, and experience of working with R&D team on product defects in Customer Networks.

• Bachelors or Masters in Electronics Engineering, Computer Science, or Optical Communications with 8+ years of relevant experience of system test in telecommunications domain

• Excellent “C/C++” programming skills with strong debugging and trouble shooting skills.

• Exposure to Network drivers, Sockets, Linux, VxWorks

This role is part of the COO Operations & Technology Transformation team. The COO organization is leading the most critical regulatory & transformation efforts for Citi's CEO, influencing the strategy & direction of Citigroup.

As an Operations and Technology Quality Control Specialist, the role will execute the quality control process by assessing the attributes of risk identification, risk mitigation, root cause analysis, controls design, controls implementation, and controls testing for the technology and operations regulatory commitments.

Excellent communication skills required to influence a wide range of users. Strong Technology Risk Management experience and expertise is required. Prior experience in 2nd or 3rd Lines of defense in the Technology Risk Management or Technology Audit are highly desired for this 1st Line of Defense role.

In-depth knowledge of the industry and peer institutions products/services is highly preferred to contribute to the objectives of the functions. The role requires a thorough understanding of strategic direction of the function within the larger COO organization, combined with a solid conceptual/practical grounding in both the function and/ or area of expertise.

Key Responsibilities:

• Conduct the quality control of the regulatory commitment deliveries aimed to remediate the Consent Order.
• Remain aligned with the remediation efforts of the technology commitments and escalate any risks or issues to the Quality Control Lead.
• Conduct thorough assessment of technology risks and controls aligned with the remediation of regulatory commitments.
• Maintains the SharePoint site for the O&T Transformation Quality Control Team and ensures compliance with the standards and procedures on documentation and tracking.

• Expertise in Technology Risks and Controls and works with colleagues in other areas of Risk Management, Data, Business and Functions and Compliance/Audit to assure appropriate management of identified risks.

• Identifies emerging risk themes across the Technology Plan design and execution.

• Develops processes for data gathering/consuming and sharing emerging threats.
• Partner with Business Functions and Technology Quality Control teams to perform Design Effectiveness Assessments throughout the lifecycle of the Regulatory Commitments.

PERSON SPECIFICATION

Qualifications:

• 7+ years of experience in a complex, financial organization, with particular focus on Technology Development, and/or Risk & Control and/or Operational Risk Management and/or Technology Audit
• Strong understanding of the Software Development Life Cycle (SDLC) best practices, risks, and controls
• Risk & Control experience in business operations and/or technology programs of a financial organization strongly preferred.
• Experience in complex business transformational programs
• Familiarity with Technology Risk Management process including identification, assessment, reporting and monitoring of Risk.
• Understanding of Quality Control or audit process and best practices for review of large transformational or technology programs
• Proven ability to act independently, work quickly and with careful attention to detail, juggle multiple priorities and thrive in a varied, fast-paced environment.
• Proven ability to work well under pressure and within tight deadlines.
• Proven ability to communicate effectively, drive consensus, and influence relationships at senior levels.
• Bachelor’s degree required. Master’s degree preferred.
• Certifications like CISSP, CRISC, CISA, CISM, GIAC, CCSP etc. are highly preferred.

-------------------------------------------------

Job Family Group:

Project and Program Management

-------------------------------------------------

Job Family:

Program Management

------------------------------------------------------

Time Type:

Full time

------------------------------------------------------

Primary Location:

New York New York United States

------------------------------------------------------

Primary Location Salary Range:

$129,840.00 - $194,760.00

------------------------------------------------------

Citi is an equal opportunity and affirmative action employer.

Qualified applicants will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Citigroup Inc. and its subsidiaries ("Citi”) invite all qualified interested applicants to apply for career opportunities. If you are a person with a disability and need a reasonable accommodation to use our search tools and/or apply for a career opportunity review Accessibility at Citi.

View the "EEO is the Law" poster. View the EEO is the Law Supplement.

View the EEO Policy Statement.

View the Pay Transparency Posting

The qualified candidate will serve as an Information Assurance professional within an established Information Security team. Under the direction of the Information System Security Manager (ISSM) the position specific responsibilities will include:

Primary Responsibilities

• This role may include a combination of duties to protect information and maintain security controls for an entire system, site, or program to reduce risk.
• Assist in managing risks related to the use of processing, storing, or transmitting information within an Information System
• Establish, implement, and manage security procedures and practices in support of customer requirements and objectives.
• Reduce or eliminate impact to confidentiality, integrity, or availability of information and information systems.
• Develop and update assessment and authorization documentation of information systems.
• Validate security policies and procedures outlined in the System Security Plan.
• Take corrective action to resolve problems identified and ensure systems are operated, maintained, and disposed of in accordance with established policies and procedures.
• Develop process for the management, review, and retention of security audit data.  Report audit discrepancies to the ISSM.
• Perform security audits IAW established procedures. 
• Establish system specific recovery processes to ensure security features and procedures are properly protected and restored.
• Conduct vulnerability management (scanning, assessment, reporting, and mitigation verification), security reviews and tests of systems to verify security features and controls are functional and effective. Take corrective action to resolve identified vulnerabilities.
• Perform periodic maintenance on systems to include installation of operating system patches and updating virus definitions.
• Install hardware and software as required.
• User account management.

Basic Qualifications

• Ability to obtain a Top-Secret clearance is required for consideration.
• Bachelor's degree in Information Security, Information Systems, Cybersecurity, Information Technology/Network Administration or related discipline, or 2 - 4 years of direct experience may be substituted in lieu of degree.
• Possess a current DoD 8570.01 compliant certification for IAM Level II, e.g. Security + w/CE, or the ability to obtain either within 6 months of employment.
• A working knowledge of Linux-based Information Systems with basic experience with Windows operating systems.
• The qualified candidate shall have excellent customer service skills and the ability to work independently, prioritize, schedule, and complete multiple tasks.

Preferred Qualifications

• Experience conducting security audits of information systems.
• Extensive training or experience with Windows-based Information Systems with a working knowledge of LINUX operating systems.
• Vulnerability assessment and analysis experience utilizing SCAP, ACAS/NESSUS and DISA STIGs
• Experience with DoD implementation of the Risk Management Framework (RMF) and governing directives (NIST, CNSS, DSS, etc.)

Original Posting Date:

2024-02-12

While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.

Pay Range:

Pay Range $65,000.00 - $117,500.00

The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Title:

Instrumentation and Control Systems Engineer

·        Job Description

Responsible for design, specification and services related to control systems including basic process control systems, safety systems, control panels, analyzer systems, telecommunications, field instrumentation and valves etc. May also be responsible for advanced controls optimization. Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in Engineering and a minimum of 11 years related experience, with average experience of 11 - 15 years. Requires sufficient professional experience to assure competence as a fully trained professional. Work requires a broad knowledge of precedents. Also may be responsible for leadership of a functional area on a small project or a segment of a larger project. As the lead, plans, budgets, organizes, coordinates and controls the project and is responsible for employee performance appraisals and for coaching and developing lower level professionals. Certification as a Licensed/Chartered Professional Engineer is preferred.

 

·        Job Posting Description

The I&C Engineer will work as an Owner Engineer supervising EPC Contractor Engineers Seconded to our client. The Engineer independently evaluates, selects, and applies standard Instrumentation and Control Systems engineering techniques, procedures, and criteria, using judgment in making minor adaptations and modifications. Assists in the design of larger and more complex assignments which involve conventional types of plans, investigations and surveys with relatively few complex features for which there are precedents.

Responsibilities:

·        Work on medium or large size engineering projects with supervision.

·        Prepare accurate and complete designs and calculations as required to meet project requirements.

·        Conduct field investigations when needed; produce field reports with detailed sketches.

·        Coordinate with other disciplines and assist engineers and/or designers to ensure effective quality product.

·        Keep up to date on new engineering processes, techniques, and IMS and standards.

·        Investigate and resolve unusual design and field engineering problems by devising new approaches.

·        Ensure that effective methods and design/engineering techniques are used.

·        Resolve project issues and problems.

·        Provide technical guidance to the design team.

·        Collaborate with design team to maximize design value.

·        Provide employee performance feedback to discipline manager.

·        Perform other duties as assigned.

Qualification/ Certification:

·        BS degree in Control System Engineering, Electrical Engineering, or Chemical Engineering with 11 plus years of hands-on engineering experience strongly preferred in petrochemical, midstream or other heavy industries.

·        Excellent verbal, written communication skills required.

·        Knowledge of Instrument calculation computer applications.

·        Ability to integrate new technologies into daily work processes.

·        Experience working with other disciplines understanding their interface requirements.

·        Experience with design and/or construction of plants desirable.

·        Knowledge of NEC, IEC , ISA & IEEE standards, methods and practices.

Skills Requirement:

·        MS Office (Must be highly proficient in Excel and Word, working knowledge in Access)

·        MS Office (Excel and Word) and product proficiency required.

·        Work with Intools (SPI) a plus.

KBR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Title:

Senior Control Systems Commissioning Engineer

Belong, Connect, Grow, with KBR!

       KBR is a company of innovators, thinkers, creators, explorers, volunteers, and dreamers and we all share one goal of improving the World and Beyond: responsibly, and safely. We attract a diverse workforce and the best minds in the world because our expertise thrives on creativity, resourcefulness, and collaboration. 

        At KBR, we care about our employees and the community

       KBR is looking for Senior Control Systems Commissioning Engineer to be based in Offshore for 6/3 rotation – Abu Dhabi UAE

Summary: The ideal candidate would be an experienced Control Systems/Instrument Engineer with formal qualifications and would have the following key skills :

• Experience of ADNOC, BP, Total (or a similar organisation)
• A Broad range of experience, at least 10 years, in the design, construction, commissioning and project management in the Control Systems discipline for the Onshore and Offshore Oil & Gas industry.
• The ability to co-ordinate and provide assurance on all Control Systems, installation and completions actitivities.
• Excellent written and verbal communications skills, and the ability to communicate effectively at all levels.
• Experience of multicultural project teams.
• Requires an in-depth knowledge of instrumentation process control and field start up.
• Requires a conceptual knowledge of specialized control systems ( ie compressor controls, batch, continuous, feedback/feedforward, cascade, theory of control)
• Ability to understand and implement a control strategy and application from P&ID instrument drawings.
• Requires an in-depth knowledge of configuration and applications level software.
• Requires an in-depth knowledge of field I/O devices.
• Specific experience in the roles and responsibilities outlined below.

Anticipated Roles and Responsibilities:

• Provide a positive role in promoting good HSE  culture.
• Evaluation of safety hazards and preparation of risk assessments.
• Witness and validate all Control System Pre-Commissioning & Commissioning activities.
• Witness and validate Control Systems  Commissioning at Yard, Offshore & Onshore locations.
• Generate discipline status indices by system.
• Provide input to planning team to establish commissioning network, priorities, durations and look ahead schedules.
• Provide input into man-hour estimates for all work to be carried out and provide input to the reporting system.
• Identification of any areas of workscope minimisation during the course of the project.
• Review  Commissioning & start up spares including Vendor spare parts and consumable list.
• Identification of materials, tools & test equipment required for commissioning.
• Review vendor packages for compliance with specifications witness running tests and final factory acceptance.
• Identification of temporary equipment required for commissioning of the facility Systems and liaison with suppliers of temporary equipment.
• Assist installation contractor & monitor execution of work to achieve mechanical completion.
• Acceptance of Mechanically Complete sub-systems from the fabricator including punch out, clearance and handover.
• Interface with Engineering support personnel on technical matters.
• Respond to site queries raised by Construction Contractor regarding Control Systems issues
• Provide technical support to the installation construction supervisers.
• Witness the installation of all control cabinets including suppliers panels.
• Witness installation of ICSS System and subsequent power up.
• Witness installation, splicing and testing of fibre optic cables systems.
• Witness installation and testing of all data highway cables.
• Witness installation of telecommunications equipment & LAN/WAN networks & subsequent power up.

Production of Commissioning Procedures.

• Develop a software control procedure for all programmable systems.
• Responsible for the management and backup of software.
• Identify / arrange & supervise supplier representatives to assist commissioning.
• Carry out Site Acceptance Test of ICSS.
• Witness testing software configuration against control narratives.
• Witness testing of graphic linking.
• Validate data base management.
• Ensure correct configuration of serial link data between ICSS & suppliers control systems & maintain an As-Built register of Bit Maps.
• Witness control loop and system application tuning.
• Witness and validate Cause & Effect logic testing of ICSS.
• Validate Commission telecommunications system including GA/PA & CCTV systems.
• Witness Commission Control Building office LAN/WAN & networking system.
• Provide assistance to operations during start up.

Client – MCA/Risk Assessment/Control Design (AVP)

Description –

The Client organization was established to drive enterprise-wide approaches to client coverage, identifying and filling in gaps or reducing duplication to ensure consistency throughout the firm. Additionally, it plays a leading role coordinating the allocation of capital and other financial, technology and human resources towards the client segments with the best returns potential. Finally, it is responsible for managing wholesale credit and counterparty risk for the organization.

About the Role –

MCA/Risk Assessment/Control Design (AVP)

This report into Client – MCA/Risk Assessment/Control Design Team and will manage several critical control-related processes as well as support projects to build or enhance the businesses control framework.

This will primarily include the transformation and the ongoing coordination and management of the department’s MCA / RCSA, interaction with the Consent Order work streams and the development of the MCA Review and Challenge program.

This is an exciting opportunity for a practically minded professional with a very good understanding of financial controls framework, with a keen interest to learn more and make a difference, and ultimately shape the ICM business of the future.

The incumbent will be working closely with Client business units, Business Managers, ICG Control teams, as well as partner areas such as Operational Risk, Compliance, Audit, Operations and Technology

Key Responsibilities –

• Lead components of the MCA transformation work as required by the Global Consent Order remediation program
• Ensure that Operational Risk Levels are within the defined parameters
• Maintain and enhance the department's Manager Control Assessment (MCA/RCSA) with regards to completeness and quality
• Lead MCA annual and quarterly review and challenge sessions
• Production of Risk and Control metrics for the Business Risk and Control Committee (BRCC)
• Development of MCA Risk and Control framework
• Collaborate with first and second line teams, as well as related partner areas to investigate and resolve control issues
• Represent Client at MCA governance forums and take ownership of submissions / follow-ups
• Provide support to partner areas and control functions on an ad-hoc basis (e.g. Compliance enquiries, Audit engagements)
• Actively partner with the Issue Management and Controls Testing teams to ensure that deficient processes and areas are covered, and to ensure that any findings are reflected appropriately

Qualifications and skills required –

• At least 5 years of relevant work experience in Financial Services in Business Risk, Operational Risk, Compliance, and/or governance and control
• Proven experience in Risk Management, including monitoring and identification of risks within relevant department and enterprise organization
• Proven experience in independently handling enhancement projects and interacting with teams across all lines of defense
• Excellent presentation skills’ ability to present findings and adjust accordingly to appropriate audience
• Excellent problem-solving skills; ability to see the big pictures with high attention to critical details
• Excellent written and verbal communication
• Interpersonal skills with the ability to work collaboratively and with people at all levels of the organization and across different geographic locations
• A proactive and “no surprises” approach in communicating issues
• Range of experience demonstrating flexibility in skillset and approach
• Has the ability to operate with a limited level of direct supervision
• Undergraduate degree required

-------------------------------------------------

Job Family Group:

Risk Management

-------------------------------------------------

Job Family:

Business Risk & Control

------------------------------------------------------

Time Type:

Full time

------------------------------------------------------

Primary Location:

Tampa Florida United States

------------------------------------------------------

Primary Location Salary Range:

$87,280.00 - $130,920.00

------------------------------------------------------

Citi is an equal opportunity and affirmative action employer.

Qualified applicants will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Citigroup Inc. and its subsidiaries ("Citi”) invite all qualified interested applicants to apply for career opportunities. If you are a person with a disability and need a reasonable accommodation to use our search tools and/or apply for a career opportunity review Accessibility at Citi.

View the "EEO is the Law" poster. View the EEO is the Law Supplement.

View the EEO Policy Statement.

View the Pay Transparency Posting

Description –

The Client organization was established to drive enterprise-wide approaches to client coverage, identifying and filling in gaps or reducing duplication to ensure consistency throughout the firm. Additionally, it plays a leading role coordinating the allocation of capital and other financial, technology and human resources towards the client segments with the best returns potential. Finally, it is responsible for managing wholesale credit and counterparty risk for the organization.

About the Role –

MCA/Risk Assessment/Control Design (VP)

This report into Client – MCA/Risk Assessment/Control Design Team and will manage several critical control-related processes as well as support projects to build or enhance the businesses control framework.

This will primarily include the transformation and the ongoing coordination and management of the department’s MCA / RCSA, interaction with the Consent Order work streams and the development of the MCA Review and Challenge program.

This is an exciting opportunity for a practically minded professional with a very good understanding of financial controls framework, with a keen interest to learn more and make a difference, and ultimately shape the ICM business of the future.

The incumbent will be working closely with Client business units, Business Managers, ICG Control teams, as well as partner areas such as Operational Risk, Compliance, Audit, Operations and Technology

Key Responsibilities –

• Lead components of the MCA transformation work as required by the Global Consent Order remediation program
• Ensure that Operational Risk Levels are within the defined parameters
• Maintain and enhance the department's Manager Control Assessment (MCA/RCSA) with regards to completeness and quality
• Lead MCA annual and quarterly review and challenge sessions
• Production of Risk and Control metrics for the Business Risk and Control Committee (BRCC)
• Development of MCA Risk and Control framework
• Collaborate with first and second line teams, as well as related partner areas to investigate and resolve control issues
• Represent Client at MCA governance forums and take ownership of submissions / follow-ups
• Provide support to partner areas and control functions on an ad-hoc basis (e.g. Compliance enquiries, Audit engagements)
• Actively partner with the Issue Management and Controls Testing teams to ensure that deficient processes and areas are covered, and to ensure that any findings are reflected appropriately

Qualifications and skills required –

• At least 7 years of relevant work experience in Financial Services in Business Risk, Operational Risk, Compliance, and/or governance and control
• Proven experience in Risk Management, including monitoring and identification of risks within relevant department and enterprise organization
• Proven experience in independently handling enhancement projects and interacting with teams across all lines of defense
• Excellent presentation skills’ ability to present findings and adjust accordingly to appropriate audience
• Excellent problem-solving skills; ability to see the big pictures with high attention to critical details
• Excellent written and verbal communication
• Interpersonal skills with the ability to work collaboratively and with people at all levels of the organization and across different geographic locations
• A proactive and “no surprises” approach in communicating issues
• Range of experience demonstrating flexibility in skillset and approach
• Has the ability to operate with a limited level of direct supervision
• Undergraduate degree required

-------------------------------------------------

Job Family Group:

Risk Management

-------------------------------------------------

Job Family:

Business Risk & Control

------------------------------------------------------

Time Type:

Full time

------------------------------------------------------

Primary Location:

New York New York United States

------------------------------------------------------

Primary Location Salary Range:

$129,840.00 - $194,760.00

------------------------------------------------------

Citi is an equal opportunity and affirmative action employer.

Qualified applicants will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Citigroup Inc. and its subsidiaries ("Citi”) invite all qualified interested applicants to apply for career opportunities. If you are a person with a disability and need a reasonable accommodation to use our search tools and/or apply for a career opportunity review Accessibility at Citi.

View the "EEO is the Law" poster. View the EEO is the Law Supplement.

View the EEO Policy Statement.

View the Pay Transparency Posting

The Manager of Quality Control & Technical Services is a strategic professional within Citi's Aviation department, who closely follows latest trends in own field and adapts them for application within own job and the business. Typically a small number of people within the business provide the same level of expertise. Excellent communication skills required in order to negotiate internally, often at a senior level. Developed communication and diplomacy skills are required in order to guide, influence and convince others, in particular colleagues in other areas and occasional external customers. Accountable for significant direct business results or authoritative advice regarding the operations of the business. Necessitates a degree of responsibility over technical strategy. Primarily affects a sub-function. Responsible for handling staff management issues, including resource management and allocation of work within the team/project.

Accountability

This is an administrative position reporting directly to the Director of Maintenance in White Plains / West Harrison, NY.

Job Description

The Manager of Quality Control & Technical Services has a broad portfolio of responsibilities, including, but not limited to:  ensuring that aircraft maintenance and all associated record-keeping is performed in compliance with FAA, manufacturer’s, and Citigroup Aviation requirements and standards; managing the maintenance departments external and internal compliance and reporting obligations; fulfilling all other duties assigned by the Director of Maintenance.

Job Role & Responsibilities:

• Serve as active and engaged quality control inspector during return to service of aircraft.
• Assist the Director of Maintenance with managing Quality Control delegated technicians as required when not available for return to service oversight.
• Oversee, maintain, and administer the full life cycle of Citigroup MX Tracking processes (CAMP/CMP) and ensure they are being properly completed.
• Perform full life cycle review of aircraft paperwork for accuracy and completeness.
• Ensure that appropriate entries are made in permanent aircraft maintenance records.
• Manage technical publications currency to ensure regulatory compliance as necessary for the performance of maintenance, preventative maintenance, and alterations.
• Monitor aircraft discrepancy records to ascertain that corrective action has been taken on all mechanical irregularities listed by crewmembers, in accordance with procedures specified in GMM.
• Ensure compliance with FAA Airworthiness Directives – maintain compliance records and tracking system.
• Maintain a repository for aircraft records: Registrations, Certificates, 337’s, STC’s, ICA’s, AD’s, etc.
• Manage calibration program. Maintain records for precision tool/test equipment and ensure that equipment is calibrated within the specified frequency.
• Manage and maintain Tool Control program. Update and revise as required to meet industry best practices.
• Ensure proper identification, storage/protection, segregation of serviceable, un-repairable and rejected items, and proper tags/identifications.
• Submit reports of defects or unairworthy conditions to the FAA if warranted.
• Assist DOM as required with the FAA in conducting inspections of company operated aircraft or company facilities.
• Oversee auditing and authorizing contracted vendors working on company aircraft including internal and external audits.
• Assist assigned Aircraft Lead Technicians oversee the quality of the work performed on company aircraft by outside vendors.
• Oversee the Maintenance Department training program, including the scheduling and compliance with all required training.
• Assist to develop, maintain, and update the Department’s General Maintenance Manual to ensure alignment with industry best practices.
• Coordinate with the Safety Manager for all maintenance related safety issues.
• Gather and record data sufficient to monitor the performance reliability and dispatchability of the aircraft and issue regular reports for Senior Management review.
• Perform other tasks and duties as assigned by the Director of Maintenance.

Qualifications:

• 8-10+ years proven quality experience with managing, implementation, and direction of quality control and assurance programs, preferably in FAA Part 121, 135, 145, or Part 91 maintenance operations.
• Demonstrated knowledge of the Code of Federal Regulations and standards relating to aircraft maintenance and operations.
• Experience with Safety related programs and initiatives; OSHA, Environmental, Ramp processes, ISO, etc. (preferred)
• Experience with internal and external auditing – administrative and process based.
• Experience with Root Cause Analysis – leading investigations and resolving issues with recommendations for improvement.
• Fluency in all aspects of MTX Tracking systems (CAMP, CMP, etc.) and documentation structure.
• Experience and fluency in tracking, compiling, and reporting on aircraft dispatch reliability and operational availability metrics.
• Fluency in Microsoft Office products, including Word, Excel, Power Point, OneNote, and Teams.

Education & Training:

• Bachelor's or University degree or equivalent experience, required.
• Possesses a valid FAA Airframe and Power Plant license, required.
• Possesses a valid Inspection Authorization, preferred.

This job description provides a high-level review of the types of work performed. Other job-related duties may be assigned as required.

-------------------------------------------------

Job Family Group:

Corporate Services

-------------------------------------------------

Job Family:

Aircraft Operations

------------------------------------------------------

Time Type:

Full time

------------------------------------------------------

Primary Location:

West Harrison New York United States

------------------------------------------------------

Primary Location Salary Range:

$192,000.00 - $288,000.00

------------------------------------------------------

Citi is an equal opportunity and affirmative action employer.

Qualified applicants will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Citigroup Inc. and its subsidiaries ("Citi”) invite all qualified interested applicants to apply for career opportunities. If you are a person with a disability and need a reasonable accommodation to use our search tools and/or apply for a career opportunity review Accessibility at Citi.

View the "EEO is the Law" poster. View the EEO is the Law Supplement.

View the EEO Policy Statement.

View the Pay Transparency Posting