Total 19 maintenance repair job vacancies in turners falls massachusetts

Performs entry level carpentry repairs using simple measures and hand tools on such tasks as replacing broken planks on picnic tables, repairing siding or wooden benches with nails, reapplying/repairing molding, or installing shelving, signage, or items like waysides. Repairs minor wood structures, such as park benches, waste baskets, and signs. Uses circular or hand saw to make straight and routine cuts. Work is supervised throughout completion. Assists with removing structures. In performing this work the incumbent typically uses simple measuring devices such as tape measures and squares; and hand and power tools such as hammers, bars, handsaws, screw drivers, and skill saws. Performs simple operational maintenance on heating, venting and air conditioning equipment by cleaning out condenser tubing, cleaning the cooling tower, inspecting, and replacing filters. Replaces toilet seats, installs soap and paper towel dispensers, unplugs sinks and toilets using a plunger. Assists in planting, transplanting, fertilizing, mulching, watering, and pruning under specific instructions and under supervision. Cleans and prepares buildings, walls, trim, and floor surfaces for painting by sanding, scraping, or wire brushing. Performs touch-up painting on tools and equipment, wood, or metal surfaces. Stains slats in park benches or on waste baskets. Paint's garbage cans, gates, signposts, and other features. Inspects, maintains, and replaces light bulbs in a variety of fixtures both inside and outside. Incumbent removes damaged portions of walls or other similar architectural features in preparation for repair of damage. Performs elementary patch work on small holes in buildings or walls. Under the direction of a higher graded worker, incumbent removes deteriorated roofing materials in preparation for reroofing. As directed and under supervision, applies new wood, asphalt, or other materials as appropriate to roof structure. Uses hand tools related to roofing repairs such as brooms, scrapers, ladders, and square shovels. Mow's lawns using large, complex industrial-type (walking and riding type) power mowers and a small domestic power mower. Performs routine maintenance and repair on equipment. Performs custodial services and laborer related task.

This is an open continuous vacancy announcement.Applicants will be referred periodically throughout the announcement period. Final application disposition will be completed once all positions have been filled or the announcement reaches the end of the open period stated in the announcement. The first cut-off date is 11:59 pm EST, DECEMBER 13, 2024.
Initial consideration will be given to candidates whose applications have been received before the first cut-off date. Qualification requirements must be met for those applications submitted by the first cut-off date.

Voyageurs National Park - Chad Nevalainen - (218) 240-4472 - chad_nevalainen@nps.gov or Steve Schultz, steve_schultz@nps.gov, 218-283-6600

Voyageurs National Park is located in northern Minnesota. The park encompasses over 218,000 acres of boreal forest and water along the Canadian border. The park is a class one air shed, and the lakes of the park are identified as outstanding resource value waters within the State. Lakes include Rainy, Kabetogama, Namakan and Sand Point; along with 26 smaller remote lakes.

The area made up a portion of the Voyageurs highway that opened the North American Continent to European settlement. The waterways of the park were integral to the growth and movement of the Ojibwe people of the region. The majority of work in the park requires access via boat in the summer or snowmobile in the winter. During winter operations the park maintains over 100 miles of snowmobile trails and 25 miles of ice roads.

• Serves as maintenance mechanic, performing work in variety of trades in carpentry, plumbing, painting and mechanical trades. Such trades involving, but not limited to maintenance of dam control tower facilities, buildings and structures.
• Operation of hydraulic systems, electrical equipment, machinery, mechanical tools, use of backhoe, tractor etc.
• Installation and construction of buildings/structures, as well as modification and repairing of current structures and buildings.
• Performs more difficult carpentry work that involves utilizing skills and techniques required to install, repair, or modify wood products such as building renovation, door/window frames, walls, furniture, etc.
• Maintenance of water treatment plants requiring filtration processes; electrical work; welding etc.
• Performs repair of electrical fixtures, defective wiring, etc. requiring the removal and replacement, splicing, and soldering or tightening of connections.
• Electrical work also involves repair or replacement of such items as switches, defective wiring, controls, circuit breakers, receptacles, ballast's, and lighting fixtures.
• Operates utility vehicles and other equipment including trucks up to 5-ton stake or dump trucks, backhoes, tractors, and other engineering equipment required to complete assignments.

• As a journeyman, repairs, installs, remodels or alters doom, door fames and trim, all kinds of hardware, shelves, staging, furniture, floors, walls, toilet partitions, wall coverings and partitions.
• Erects partitions of metal studs and gypsum wallboard or prefabricated materials.
• As a journeyman, performs maintenance, repair, alterations and construction of exterior and interior surfaces and structures built of a variety of brick, block and stone and lays common and face brick, tile firebrick, glazed tile, ceramic tile, cinder and cement block, glass block, terra cotta and various artificial and natural stone to repair and construct such items as walls, walks, manholes, boilers and catch basins.
• Mixes, applies and finishes plaster surfaces in the construction and repair of interior walls and ceilings and performs new plastering on all types of backgrounds such as metal, wood or gypsum lath, wallboard, and masonry surfaces as well as repairing and patching plaster surfaces.
• Under general guidance of the Supervisory Maintenance Mechanic, initiates (drafts) requests for supplies for necessary (steel studs, sheet rock, doors, hardware, cement block, concrete mix, lath and plaster mix, ceiling grids and acoustical tiles, etc.) for the specific construction task.
• Constructs all new space partitions using dry wall construction and/or masonry tile, as appropriate, and is responsible for delivery of a thoroughly finished product that matches the quality of the original hospital construction.
• Possesses thorough familiarity with accreditation and building code requirements and the ability to improvise when established methods are not practical.
• Interprets blueprints, drawings, building codes, practices and standards of the trade.
• Fills in the gaps on incomplete blueprints and sketches and knowledge of advanced shop mathematics to plan and compute work with features such as arcs or circles.
• Possesses an extensive knowledge of the working properties, gradations in quality and other characteristics of the variety of material used in hospital construction.
• Demonstrates thorough knowledge and extensive experience in the mason and plastering
  trade practices and is skilled in applying work methods and techniques in a variety of
  exacting plaster, work such as running baseboards, moldings, cornices and applying
  special finishes.
• As a journeyman, uses safety and precision of any carpentry tools and equipment in both shop and field work, including work involving curves, angles and irregular shapes which must have exact measurements or fits.
• Uses tools common to the plastering trade such as angle trowels, screeds, plaster's hawk, straight edges and cement mixers.
• Possesses comprehensive knowledge of the techniques and procedures of brick, block, tile and stonework.
• Constructs sills, lintels and arches.
• Performs decorative brickwork, veneer, tile and cut, shape finish stone.
• Uses a variety of hand and power tools such as brick or napping hammer, brick or skill saw, stone axe, pick chisel and hammer.
• Uses a variety of building crafts including carpentry, masonry, cement work, plastering and other related trades. Typical construction projects include equipment installation (HVAC, nourishment kitchen, film processor, etc.), renovation of office space including relocation of walls, doors, plumbing and lighting etc.
• Works from detailed engineering drawings with complete specifications or from only rudimentary conceptual sketches of the construction to be performed.
• Plans, lays out and completes work according to accepted trade standards following work orders, blueprints, building plans, sketches and building codes. This includes determining details such as dimensions, type of structure, material to be used and assembling tools and material needed to complete assignments.
• Completes finishing work to obtain a smooth surface and to obtain proper texture and is able to perform angular, rounded and overhead plastering.
• As the senior journeyman of the construction crew, reviews dimensional layout of the construction boundaries including locations of new walls, plumbing fixtures, conduit penetrations, etc. and for the erection of any necessary dust confining barriers.
• Uses and maintains a complete set of hand and power tools including but not limited to: saws, planes, sanders, routers and drills in order to accomplish different tasks such as cut bevels, rabbets, chamfers, dados, grooves and miter joints.

(1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.

(2) Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.

(3) Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.

(4) Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.

(5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.

(6) May maintain and repair electronics communication equipment by removing and replacing components and elements. Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms.

Performs other duties as assigned.

The above duty description does not contain all details of the official position description. For more details, please contact the POC listed above.

(1) Performs maintenance, troubleshooting, and major repair on heavy-duty mobile equipment, combat, tactical, and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, bulldozers, power shovels, tanks, tracked combat vehicles, all terrain vehicles, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and/or overhauls, as a regular and recurring duty, a variety of the mechanically complex major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. Makes repairs and modifications to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc., for use or placement in systems for which they were not specifically designed. Improvises work when standard procedures do not apply.

(2) Troubleshoots equipment with a variety of the mechanically complex major systems and diagnoses difficult performance problems and the cause of mechanical failures by means of visual and auditory checks, uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of specialized original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.

(3) Removes and disassembles engines and complex major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures, and improvises repair techniques when standard procedures are not available. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. Repairs equipment with a variety of interconnected systems to include state of the art electrical and electronic, fuel injection, interconnected gear reduction, multiple engine, and similarly complex systems. Improvises, substitutes, or alters components or parts to fit into systems for which the items were not specially designed or finds other ways to correct defects when existing methods and procedures do not give desired results.

(4) Independently performs repairs and maintenance functions with little or no supervision in remote locations. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work on interconnected complex systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team."

(5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.

(6) Performs electrical repairs on complex state of the art electrical and electronic systems requiring extensive training on specialized diagnostic equipment to identify problems.

(7) Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned. Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production.

(8) Performs other duties as assigned

(1) Performs maintenance, troubleshooting, and major repair on heavy-duty mobile equipment, combat, tactical, and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, bulldozers, power shovels, tanks, tracked combat vehicles, all terrain vehicles, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and/or overhauls, as a regular and recurring duty, a variety of the mechanically complex major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. Makes repairs and modifications to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc., for use or placement in systems for which they were not specifically designed. Improvises work when standard procedures do not apply.

(2) Troubleshoots equipment with a variety of the mechanically complex major systems and diagnoses difficult performance problems and the cause of mechanical failures by means of visual and auditory checks, uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of specialized original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.

(3) Removes and disassembles engines and complex major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures, and improvises repair techniques when standard procedures are not available. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. Repairs equipment with a variety of interconnected systems to include state of the art electrical and electronic, fuel injection, interconnected gear reduction, multiple engine, and similarly complex systems. Improvises, substitutes, or alters components or parts to fit into systems for which the items were not specially designed or finds other ways to correct defects when existing methods and procedures do not give desired results.

(4) Independently performs repairs and maintenance functions with little or no supervision in remote locations. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work on interconnected complex systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team."

(5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.

(6) Performs electrical repairs on complex state of the art electrical and electronic systems requiring extensive training on specialized diagnostic equipment to identify problems.

(7) Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned. Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production.

(8) Performs other duties as assigned.

(1) Performs maintenance, troubleshooting, and major repair on heavy-duty mobile equipment, combat, tactical, and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, bulldozers, power shovels, tanks, tracked combat vehicles, all terrain vehicles, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and/or overhauls, as a regular and recurring duty, a variety of the mechanically complex major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. Makes repairs and modifications to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc., for use or placement in systems for which they were not specifically designed. Improvises work when standard procedures do not apply.

(2) Troubleshoots equipment with a variety of the mechanically complex major systems and diagnoses difficult performance problems and the cause of mechanical failures by means of visual and auditory checks, uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of specialized original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.

(3) Removes and disassembles engines and complex major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures, and improvises repair techniques when standard procedures are not available. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. Repairs equipment with a variety of interconnected systems to include state of the art electrical and electronic, fuel injection, interconnected gear reduction, multiple engine, and similarly complex systems. Improvises, substitutes, or alters components or parts to fit into systems for which the items were not specially designed or finds other ways to correct defects when existing methods and procedures do not give desired results.

(4) Independently performs repairs and maintenance functions with little or no supervision in remote locations. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work on interconnected complex systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team."

(5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.

(6) Performs electrical repairs on complex state of the art electrical and electronic systems requiring extensive training on specialized diagnostic equipment to identify problems.

(7) Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned. Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production.

(8) Performs other duties as assigned.

(1) Planning: Plans use of subordinate workers, equipment, facilities, and materials on a week-to-week or month-to-month basis. Establishes deadlines, priorities, and work sequences, and plans work assignments based on general work schedules, methods, and policies set by the supervisor. Coordinates work with supporting or related work functions controlled by other supervisors. Determines the number and types of workers needed to accomplish specific projects. Determines skills, materials, and equipment required to do the work. Redirects individual workers and resources to accomplish unanticipated work. Informs the supervisor of the need to revise work schedules and re-estimate labor and other resources. Participates in the initial planning of current and future work schedules, staffing needs, estimates, and recommendations as to scheduling projected work. Assists the supervisor with quarterly funding distribution and decisions, based on operational needs for units supported by customer activities. Reviews funding requirements, prioritizes request and allocates funding based on readiness, training, and mobilization requirements. Provides management with workload data, estimates, and recommendations to facilitate more effective management decisions for staffing and funding requirements to support customer units.

(2) Work Direction: Assigns tasks to be performed based on readiness and explains work requirements, methods, and procedures. Investigates work related problems such as excessive costs or low productivity and determines causes. Implements corrective actions within authority to resolve work problems. Recommends solutions to staffing problems, engineering requirements, and work operations directed by other supervisors. Ensures work in progress and completed work meets established standards by implementation of a quality control and assurance program within the organization. Ensures equipment repairs do not exceed maintenance expenditure limits in accordance as established by regulation and or policies. Manages maintenance backlog through coordination with other maintenance activities. Evacuates and accepts equipment, repairs, and services to and from other maintenance facilities. Assures tools, special tools, test measurement and diagnostic equipment, personal protective equipment, repair parts, petroleum, oils and lubricants, and other materiel are available when needed.

(3) Administration: Plans and establishes overall leave schedules. Determines training needs of subordinates and arranges for accomplishment. Sets performance standards, and makes formal appraisals of subordinate work performance. Initiates recommendations for promotion or reassignment of subordinates. Ensures that regulations governing safety and housekeeping are observed with appropriate protective clothing and equipment being utilized.

(4) Performs non-supervisory work, such as, transporting equipment, performing maintenance tasks, etc.

(5) Develops, publishes, and ensures employee compliance with standing operating procedures for the activity supervised. Implements and complies with agency, state, and federal regulatory Occupational Safety and Health, and environmental requirements. Ensures use of quality conformant products through compliance with established materials shelf life programs. Ensures all aspects of Force Protection to include physical security, facility and vehicle key control, property accountability, access control and employee protection in accordance with established policies and regulations. Implements procedures to account for all real property, installation property, MTO&E (Modified Tables of Organization and Equipment) property, TDA (Tables of Distribution and Allowances) property, and installed equipment located at or assigned to the facility in accordance with state and federal regulations and policies. Ensures subordinates are trained, qualified, and equipped with proper personnel protective equipment, environmental mediation equipment and materials. Ensure the employees wear appropriate safety equipment and follow pertinent safety precautions.

(6) Prepares for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises. May be required to perform such additional duties as structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operation, maintenance of facilities and equipment, or to serve as a team member on boards to cope with natural disasters or civil emergencies.

(7) Performs other duties as assigned.

(1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.

(2) Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.

(3) Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.

(4) Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.

(5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.

(6) May maintain and repair electronics communication equipment by removing and replacing components and elements. Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms.

Performs other duties as assigned

(1) Leader Duties:
a. Assigns work orders to specific crewmembers and selects workers for various jobs on the basis of knowledge, skills, and abilities. Passes on to workers instructions received from the supervisor, demonstrates proper work methods, and starts work. Insures that needed plans, blueprints, material, and tools are available, and that needed stock is obtained from supply locations. Works along with other workers and sets pace performing non-supervisory repair work of the same kind and level as that done by the group led. Work performed by the incumbent involves troubleshooting, maintenance and major repairs on heavy-duty mobile equipment, combat, tactical, and automotive vehicles.
b. Assures that there is enough work to keep everyone in the work crew busy. Checks work in progress and when finished for compliance with supervisor's instructions, work orders, and established shop procedures on work sequence, procedures, methods and deadlines; and directs or advises other workers to follow supervisor's instructions and to meet deadlines. Answers workers' questions regarding procedures, policies, written instructions, and other directives. Interprets work instructions and assists lower graded repairers or trainees in the more difficult and complex tasks. Provides information to the supervisor on status and progress of work, causes of delays, and overall work operations and problems. Assures that safety and housekeeping rules are followed.

(2) Non-Supervisory Duties:
a. Performs maintenance, troubleshooting, and major repair on heavy-duty mobile equipment, combat, tactical, and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, bulldozers, power shovels, tanks, tracked combat vehicles, all terrain vehicles, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and/or overhauls, as a regular and recurring duty, a variety of the mechanically complex major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. Makes repairs and modifications to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc., for use or placement in systems for which they were not specifically designed. Improvises work when standard procedures do not apply.

b. Troubleshoots equipment with a variety of the mechanically complex major systems and diagnoses difficult performance problems and the cause of mechanical failures by means of visual and auditory checks, uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of specialized original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.

c. Removes and disassembles engines and complex major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures, and improvises repair techniques when standard procedures are not available. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. Repairs equipment with a variety of interconnected systems to include state of the art electrical and electronic, fuel injection, interconnected gear reduction, multiple engines, and similarly complex systems. Improvises, substitutes, or alters components or parts to fit into systems for which the items were not specially designed or finds other ways to correct defects when existing methods and procedures do not give desired results.

d. Independently performs repairs and maintenance functions with little or no supervision in remote locations. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work on interconnected complex systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team."

(3) Performs other duties as assigned.

The position is the first line supervisor of the Carpentry & Lock Shop staff and S/he would serve under the direct supervision of the Maintenance & Operation (M&O) Supervisor.

• The incumbent has full administrative control and supervision of the Carpentry & Lock Shop
  personnel and is responsible for the maintenance and repair of all buildings, planning and
  executing in-house construction and remodeling projects, contributes to project development
  and works with contractors performing work.
• S/he ensures compliance with fire/smoke barrier penetration work to ensure penetrations are sealed and documented as repaired upon completion of work; conducts inspections to assure quality control of work performed by shop personnel; conducts life safety inspections and assigns work from such inspections;
• The incumbent organizes and plans work of subordinates into the most productive working group and determines priorities of work projects to ensure accomplishment on a planned schedule and on a timely basis.
• Individual must be well versed at the journeyman level in carpentry, masonry, painting, window maintenance, locksmith and door closer repair work.
• Individual will have a good working knowledge of different woods, paints and the various other materials. Must know the safety codes associated with the trades for which they are responsible.
• Creates follow-up measures on critical or urgent items identified during inspections and coordinates all
  needed repairs or maintenance; prioritizes, integrates and coordinates various work activities
  for optimum effectiveness and efficiency of utilizing man-hours, equipment and funding
  resources to meet user, program, and/or mission needs.
• Incumbent is responsible for ensuring that all work is performed according to established
  policies, procedures, and VA, Joint Commission (JC), OSHA & NFPA requirements.
• S/he identifies and makes economically sound recommendations
  concerning building structure, building maintenance, modernization or replacement planning.
• Develops budgets and project estimates for emergency repairs, minor in-house construction
  and improvement projects, equipment replacement, preventative maintenance (PM), in house
  or contracted labor & material costs by assisting in developing the scope of work, generating
  work requests and setting the worksite and hourly performance standards for trade shop
  personnel.

• The position is that of a Working Supervisor and as such requires considerable walking and/or
• driving while making work inspections or responding to emergency situations.
• Work requires standing, stooping, bending, sitting, crawling, climbing and reaching. Incumbent must be able to supervise work for prolonged periods of time while working around high voltage, steam lines, ladders, staging, mechanical rooms, catwalks, steam tunnels and/or crawlspaces.
• Frequently lifts and carries tools, materials, equipment, ladders, scaffolding and supplies up to 50 pounds unassisted. Occasionally lift and carry items over 100 pounds with assistance or mechanized equipment.
• Emergency situations will require the employee to work in extreme hot, cold, stressful situations or darkness to direct employees and correct the incident at hand.

• This is a Non Bargaining Unit Position.
• This position is in the Competitive Service.
• This is a temporary, not to exceed 120 days position which may be extended or converted to a permanent position without further competitive procedures.
• Veterans' Preference: Veterans Preference does not apply for internal or other current permanent federal agency employee.
• The incumbent is required to maintain a valid driver's license issued from any state.

(1) Inspects a variety of armament materiel such as towed and self-propelled artillery, tank turrets and weapons, small arms, chemical weapons and similar materiel as well as optical and fire control equipment. Uses a wide variety of test and diagnostic equipment such as borescopes, pullover gauges, nitrogen pressure gauge, and other tools and tests used in inspection of armament to determine extent of repairs required and assure that repairs or modifications meet quality assurance standards.

(2) Inspects equipment received for maintenance to determine repairs needed and parts required or to determine if Modification Work Orders (MWO) have been applied. Inspects new and old equipment removed from storage or before issue to units to ensure equipment is operating properly. Inspects equipment to determine repairs needed.

(3) Inspects equipment to determine repairs needed. Utilizes established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s). Considers a variety of factors such as cost and availability of parts, man-hours, and impact of time constraints on the mission to assess whether repair is economical. Recommends to a higher echelon to condemn equipment when the repair cost exceeds the established MEL. Prepares lists of needed repairs, parts, and man-hours authorized. Performs in-process inspections to assure that equipment is being repaired in accordance with pertinent requirements. Performs final inspection, certifying that equipment is in satisfactory operating condition, or rejects the work and returns the equipment to the repair shop with specific reports prescribing additional repairs

(4) Inspects the full range of equipment as described above at remote worksites in support of field organizations, field units during field exercise training periods, or before major pieces of equipment are sent for repair to a supporting maintenance facility. Serves as inspector on Command Maintenance Evaluation Teams (COMET) and/or as a member of Maintenance Assistance and Instruction Teams (MAIT).

(5) Performs other duties as assigned.

1) Leader Duties:

a. Assigns work orders to specific crewmembers and selects workers for various jobs on the basis of knowledge, skills, and abilities. Passes on to workers instructions received from the supervisor, demonstrates proper work methods, and starts work. Insures that needed plans, blueprints, material, and tools are available, and that needed stock is obtained from supply locations. Works along with other workers and sets pace performing non-supervisory repair work of the same kind and level as that done by the group led. Work performed by the incumbent involves troubleshooting, maintenance and major repairs on heavy-duty mobile equipment, combat, tactical, and automotive vehicles.

b. Assures that there is enough work to keep everyone in the work crew busy. Checks work in progress and when finished for compliance with supervisor's instructions, work orders, and established shop procedures on work sequence, procedures, methods and deadlines; and directs or advises other workers to follow supervisor's instructions and to meet deadlines. Answers workers' questions regarding procedures, policies, written instructions, and other directives. Interprets work instructions and assists lower graded repairers or trainees in the more difficult and complex tasks. Provides information to the supervisor on status and progress of work, causes of delays, and overall work operations and problems. Assures that safety and housekeeping rules are followed.

(2) Non-Supervisory Duties:

a. Performs maintenance, troubleshooting, and major repair on heavy-duty mobile equipment, combat, tactical, and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, bulldozers, power shovels, tanks, tracked combat vehicles, all terrain vehicles, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and/or overhauls, as a regular and recurring duty, a variety of the mechanically complex major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. Makes repairs and modifications to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc., for use or placement in systems for which they were not specifically designed. Improvises work when standard procedures do not apply.

b. Troubleshoots equipment with a variety of the mechanically complex major systems and diagnoses difficult performance problems and the cause of mechanical failures by means of visual and auditory checks, uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of specialized original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.

c. Removes and disassembles engines and complex major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures, and improvises repair techniques when standard procedures are not available. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. Repairs equipment with a variety of interconnected systems to include state of the art electrical and electronic, fuel injection, interconnected gear reduction, multiple engines, and similarly complex systems. Improvises, substitutes, or alters components or parts to fit into systems for which the items were not specially designed or finds other ways to correct defects when existing methods and procedures do not give desired results.

d. Independently performs repairs and maintenance functions with little or no supervision in remote locations. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work on interconnected complex systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.

Performs other duties as assigned.

The above duty description does not contain all details of the official position description. For more details, please contact the POC listed above.

• Performs work involved in the maintenance, repair and overhaul of installed mechanical equipment and control systems utilized in the provision of basic utility services as required by the activity assigned to accomplish this mission.
• Installs, maintains, and modifies utility connections and processing equipment, as required. Uses specialized diagnostic and test instruments compatible with the various manufacturer's equipment.
• Inspects, troubleshoots, repairs and replaces mess hall equipment, refrigerated and display storage units, food service equipment, dishwasher and disposal units. Inspects, repairs, and replaces signs, traffic control devices and guardrails.
• Operates backhoes, front end loaders, dump trucks, graders and sanders to push, plow and remove snow and ice from roadways and parking lots.
• Clears and opens channel ditches of debris.

As a SURFACE MAINTENANCE MECHANIC, WG-5801-10, you will perform the following duties:

(1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.

(2) Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary

.(3) Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.

(4) Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.

(5) May maintain and repair electronics communication equipment by removing and replacing components and elements. Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms.

(6) Performs other duties as assigned.

*The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description (PD#:D1194000). https://acpol2.army.mil/ako/fasclass/search_fs/search_fasclass.asp