Total 460 maintenance repair job vacancies in new york ny usa

Major Duties

• Performs a variety of tasks involved with installing, modifying, troubleshooting and repairing new and existing systems, including, but not limited to: condensers, chillers, air handlers, compressed air, humidifying, dehumidifying, filtering, refrigerators, freezers and computer based Energy Management Control Systems (EMCS).
• Maintains, repairs and installs new and existing plumbing systems, to include, but not limited to: high/ low pressure piping, sanitary sewer, steam heat, steam generation, circulating, vacuum, and condensate pumps, expansion tanks, radiators, lavatories, commodes, and water heaters.
• Works from building plans, blueprints and sketches to plan and layout routing of piping, vents, wiring, refrigeration lines, ductwork and valves.

• Reads and interprets blueprints and wiring diagrams relative to the assigned equipment and utility systems. He/she must be able to read and understand technical manuals and instructions on air conditioning and refrigeration equipment, as well as pumps, valves, gas and oil fired boilers and furnaces.
• Estimates cost, both labor and material, and prepare lists of materials for the completion on any job to be done
• Uses hand and power tools, to include, but not limited to: multi-meters, diagnostic equipment, air velocity meters, flue gas analyzer, grinders, pipe threading machine, pipe cutter, Oxy-Acetylene torch, refrigeration gauges, and motorized drain cleaner.
• Troubleshoots, calibrates, balances and operates central heating, ventilation, air conditioning, and steam systems and their associated equipment and controls within the facility.
• At a minimum, possesses a Universal Technician certification in accordance with 40 CFR part 82, subpart F, as well as a Gas Fitters License.
• Creates leak-free joints in piping and tubing systems by using the appropriate method, to include, but not limited to: solder, silver solder, Teflon sealant, and compression fittings.
• Possesses the knowledge of electrical wiring and related components of pumps, air handlers, chillers, water heaters, exhaust fans, electronic valves, etc. and be able to troubleshoot, repair and/or install such items.

• Confers with the Maintenance Scheduler and/or the M&R Operations Supervisor regarding his findings relative to maintenance and repairs to utility systems and equipment and helps plan and coordinate the repair of any issues.
• Knows codes and regulations pertaining to the practice of HVAC, refrigeration, plumbing and steam. Plumbing includes but is not limited to domestic water, heating/cooling piping, natural gas/propane, compressed air, sanitary drain piping.
• Plans his/her work in compliance with the prescribed standards of quality and quantity in accordance with established policy, codes, and regulations.
• Performs maintenance of all air conditioning and refrigeration equipment, including changing oil, replacing gaskets, replacing defective lines and/or valves including expansion valves, back pressure valves, water control valves, pressure regulators, compressors, receivers, condensers, evaporators, and automatic controls.
• Performs maintenance, repair, and installation on, but not limited to the following dietetic equipment: reach-in and walk-in refrigerators/freezers and all related components, ice making machines, hot-cold food carts, and lowerators.
• Maintains, repairs and modifies compressed air systems (excluding Medical Air) throughout the facility to ensure proper operation, pressure and filtration.
• Performs maintenance and repair, extensions and alterations to all piping, fixtures, appliances and appurtenances in connection with any of the following: sanitary drainage or storm drainage facilities; the venting systems; the water supply system; gas distribution within or adjacent to buildings, structures or conveyance and throughout the grounds of the medical center.
• Installs and maintains all types of equipment such as lavatories, commodes, showers, and dietetic equipment, hot water heaters, boilers, radiators, pressure regulating valves, sprinkler systems, sterilizers, steam traps, back-flow preventers, and all thermostatic equipment.
• Makes preventive maintenance inspections of all steam, water, and gas lines, and on fixtures and appliances, relative to those portions of utility systems.
• Performs the following related tasks in connection with said duties: pipe covering, welding, brazing, sheet metal work and minor electrical work such as controls on pumps and HV AC equipment, chrono-flow and motorized valves, vacuum pumps and pneumatic systems and piping or plumbing related to x-ray and dental equipment.
• Follows all Lock-Out Tag-Out procedures as required by OSHA and VA regulations.

Job reference:
008179Salary:
Starting from £26,000 + on call allowance and 27 days holidayClosing date:19/11/2024
Department: Delivery Frontline
Location: York - Bootham Park Hospital (Mobile position)

Employment Category: Employee
Hours Per Week: 37.5
We have a great opportunity for a Maintenance Operative-Fabric. This will be to join our team based in
York
-
Bootham Park Hospital .
The starting salary for this role is from £26,000
(depending on experience) plus on call allowance.This is a permanent, full time position working 37.5 hours per week.This is a mobile role covering the North Yorkshire area.
Requirements for the role:Qualifications - At least one of the below:

• NVQ Level 2 or higher BTEC/City & Guilds or equivalent in Plumbing/Carpentry
  and joinery.
• Formal apprenticeship or craft trained equivalent.

Additional Requirements:

• Driving licence is essential
• Must be comfortable using technological devices to log jobs.
• On-Call availability
• Desirable to have industry experience
• Ability to work alone and/or as part of a wider team as this role will require you to work cohesively with other Technical Disciplines.

Please note, DBS Checks & DVLA checks will be required for this role.
Key Responsibilities:

• Ensure compliance in accordance with Health, Safety & Wellbeing Policies, relevant company Technical Guidance, Process and Procedures, Statutory Regulations, Approved Codes of Practice and any applicable aspects of HTMs.
• Deliver Scheduled, Reactive and Remedial maintenance services as directed by the PPM planner (CAFM), helpdesk or Technical Services Supervisor, ensuring that operational standards are always maintained.
• To also support the work that is included in minor works mangers activities.
• Undertake routine repairs or minor works including joinery, painting and decoration, general building works, ground works or general plumbing.
• To maintain effective site log books at all company premises where required, ensuring that they are completed in a timely and accurate manner.
• Support the Projects/Construction team and Team Leader in delivering minor capital works to company premises.
• Complete suitable risk assessments prior to undertaking works and undertake works as per instructions within any relevant permit or work plan

What you need to do now
If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.
If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.

Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The purpose of the position is to serve as an inspector of surface maintenance equipment to ensure that physical and operating characteristics are within acceptable standards and specifications. Duties involve complex inspection work that requires a wide variety of inspection processes and techniques. May assist higher graded inspectors, as required.

• Inspects a large variety of heavy-duty mobile equipment (i.e., combat, tactical, etc.) and automotive vehicles (i.e., attack tanks, large cranes, tank retrievers, fire trucks, bridge transporters, armored vehicle launched bridges, bulldozers, road graders, crawler tractors, power shovels, self propelled earth compacting equipment, self propelled artillery, etc.). May also inspect heavy artillery, small arms, powered support and other equipment or components of equal or lesser complexity. May assist higher-graded inspectors to perform inspections on equipment repairs.
• Inspects complex, interrelated mechanical, hydraulic, pneumatic, electronic and electrical systems, equipment and their components while in operation or in a standby condition. Inspects and performs tests to braking, steering, and differential systems, which are mechanically integrated with the transmission; to large engines, which directly power multiple hydraulic and pneumatic systems; to intricate fuel injection systems; to turret stabilization systems; and to other systems combined in a single, complex mechanical assembly. Uses specially designed testing methods and test equipment such as computerized test sets, precision gauges, electronic sensors, injector test stands, engine scopes, etc., to assure that tolerance and safety factors have been met.
• Inspects equipment to determine repairs needed. Utilizes established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s). Considers a variety of factors such as cost and availability of parts, man-hours, and impact of time constraints on the mission to assess whether repair is economical. Recommends to a higher echelon to condemn equipment when the repair costs exceed the established MEL. Prepares lists of needed repairs, parts, and man-hours authorized. Performs in-process inspections to assure that equipment is being repaired in accordance with pertinent requirements. Performs final inspection, certifying that equipment is in satisfactory operating condition, or rejects the work and returns the equipment to the repair shop with specific reports prescribing additional repairs.
• Serves as inspector on Command Maintenance Evaluation Teams (COMET) and/or as a member of Maintenance Assistance and Instruction Teams (MAIT).
• Performs other duties as assigned.

(1) Performs limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assists higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Performs work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.
(2) Performs limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determines when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.
(3) Removes, replaces, adjusts, cleans and installs parts and components such as wheel seals, switches, sensors, fuel pumps, water pumps, power steering pumps, brakes, filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, battery cables, and other items of similar complexity.
(4) Independently performs routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts. Receives guidance and instruction from a higher graded mechanic or supervisor to perform non-routine and more complex repairs on portions of major assemblies and/or systems. May provide field maintenance at unit locations as part of a "contact team". Recovers and evacuates inoperable vehicles from the unit location of breakdown.
(5) Conducts limited readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs Preventive Maintenance Checks and Services (PMCS) and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc. Performs other preventive maintenance operations as required to ensure that equipment is functioning properly.
(6) May perform routine maintenance and limited repairs on basic communication equipment such as radios, field telephones, amplifiers, switchboards, recorders, intercoms by removing and replacing components and elements. Performs minor body and fender, or other metal repairs, using peening hammers, dollies and limited welding. Performs limited repairs and routine maintenance on small arms and accessory equipment by replacing worn or damaged parts. Makes minor repairs to canvas and leather items using bonding/sealing compounds and hand tools such as awls, canvas needles etc.
(7) In conjunction with or in the absence of the Tools and Parts Attendant, may maintain supply documentation, and the receipt, store, issue, and inventory of tools and parts used in the trades operation.(8) Performs other duties as assigned.

• Assist the Operations Manager/Executive & Building Supervisor on a day to day operations
• Attend to the breakdown of the air-conditioning system, plumbing and electrical issue
• Attend to complaints, calls and queries from tenants on operation related matters
• Troubleshoot some minor technical / facility problems
• Carry out preventive maintenance according to maintenance work schedule
• Conduct daily inspections (checklist)
• Recommend and suggest preventive maintenance or repair to the Operations Manager/Executive & Building Supervisor to minimize emergency breakdown of service
• Carry out joint inspections with the term service provider during the regular servicing
• Supervise to ensure that repair and replacement work are carried out properly by a term service provider or contractor in a timely manner
• To supervise & monitor term service providers & contractors to make sure they comply with workplace safety & health legislation, guideline & code of practice
• To sign off service provider service report
• To assist in Marcom events when necessary such as sound system & lightings
• To call & coordinate M&E breakdown with the service provider
• To inspect daily for units under fitting out during fit-out period and units under reinstatement
• Check the vacant unit/units which are taking-over or handing-over, to draw up technical / building specifications eg. to confirm the electrical / exhaust capacity, water & drainage provisions etc.

(1) Performs limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assists higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Performs work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.(2) Performs limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determines when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.(3) Removes, replaces, adjusts, cleans and installs parts and components such as wheel seals, switches, sensors, fuel pumps, water pumps, power steering pumps, brakes, filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, battery cables, and other items of similar complexity.(4) Independently performs routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts. Receives guidance and instruction from a higher graded mechanic or supervisor to perform non-routine and more complex repairs on portions of major assemblies and/or systems. May provide field maintenance at unit locations as part of a "contact team". Recovers and evacuates inoperable vehicles from the unit location of breakdown.(5) Conducts limited readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs Preventive Maintenance Checks and Services (PMCS) and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc. Performs other preventive maintenance operations as required to ensure that equipment is functioning properly.(6) May perform routine maintenance and limited repairs on basic communication equipment such as radios, field telephones, amplifiers, switchboards, recorders, intercoms by removing and replacing components and elements. Performs minor body and fender, or other metal repairs, using peening hammers, dollies and limited welding. Performs limited repairs and routine maintenance on small arms and accessory equipment by replacing worn or damaged parts. Makes minor repairs to canvas and leather items using bonding/sealing compounds and hand tools such as awls, canvas needles etc.(7) In conjunction with or in the absence of the Tools and Parts Attendant, may maintain supply documentation, and the receipt, store, issue, and inventory of tools and parts used in the trades operation.(8) Performs other duties as assigned.

Major Duties: This is not an all-inclusive list

A SURFACE MAINTENANCE MECHANIC LEADER, WL-5801-11, (1) Leader Duties: a. Assigns work orders to specific crewmembers and selects workers for various jobs on the basis of knowledge, skills, and abilities. Passes on to workers instructions received from the supervisor, demonstrates proper work methods, and starts work. Insures that needed plans, blueprints, material, and tools are available, and that needed stock is obtained from supply locations.
b. Assures that there is enough work to keep everyone in the work crew busy. Checks work in progress and when finished for compliance with supervisor's instructions, work orders, and established shop procedures on work sequence, procedures, methods and deadlines; and directs or advises other workers to follow supervisor's instructions and to meet deadlines. Answers workers' questions regarding procedures, policies, written instructions, and other directives. Interprets work instructions and assists lower graded repairers or trainees in the more difficult and complex tasks.
(2) Non-Supervisory Duties: a. Performs maintenance, troubleshooting, and major repair on heavy-duty mobile equipment, combat, tactical, and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, bulldozers, power shovels, tanks, tracked combat vehicles, all terrain vehicles, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and/or overhauls, as a regular and recurring duty, a variety of the mechanically complex major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.
b. Troubleshoots equipment with a variety of the mechanically complex major systems and diagnoses difficult performance problems and the cause of mechanical failures by means of visual and auditory checks, uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of specialized original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair
c. Removes and disassembles engines and complex major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures, and improvises repair techniques when standard procedures are not available. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems.
d. Independently performs repairs and maintenance functions with little or no supervision in remote locations. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work on interconnected complex systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems
e. Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT).
f. Performs electrical repairs on complex state of the art electrical and electronic systems requiring extensive training on specialized diagnostic equipment to identify problems.
g. Assists in the maintenance of production reports and records, and makes recommendations to the supervisor.

Performs other duties as assigned.

Main Responsibilities

1. Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.
2. Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification
3. Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals
4. Prepare operational and maintenance schedule as per MIS
5. Work closely and collaborate with the customer support team to ensure customer satisfaction.
6. Identify potential upselling opportunities at client site during regular or ad-hoc maintenance
7. Remote monitoring of the system operation and performance and reach site if any emergency.
8. Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.
9. Working with a team and deliver the work within the planned schedule.
10. Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.
11. Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

1. Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent
2. Electrical or Mechanical troubleshooting experience would be advantageous
3. HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment
4. Strong communication and analytical skills.

Main Responsibilities

Maintain and monitor complex clients’ systems:

• Responsible for technical support for complex systems and problems, ensuring performance of the asset (client) is maintained throughout the course of the contract
• Collate and evaluate statistical data related to the performance of the assets
• Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

Manage responses to emergency situations:

• Facilitate responses to emergency situations and recovery activities
• Evaluate and provide fast resolution to critical field performance issues
• Visit sites to diagnose BBP operational issues and develop resolution plans for complex cases that cannot be easily resolved
• Review and approve recommended repair works for major equipment and system failures
• Check performance deviations and define root cause for any performance issues and to escalate to either Engineering or Performance team, as needed.

Provide oversight on maintenance work:

• Responsible for the planning of corrective, preventive and predictive maintenance activities to ensure BBP equipment and client systems are fully functional and in optimal operating condition, preserving BBP energy savings
• Optimise maintenance plans and schedules for inspection, testing, repair and predictive maintenance of equipment and systems to minimise downtime and costs
• Provide technical guidance on equipment and systems maintenance
• Endorse resourcing requirements to achieve operational state in accordance with BBP expectations
• Drive internal and subcontractor compliance with the health & safety standards and practices

Support Customer Support/Business Development teams in creating further business opportunities:

• Foster close collaboration with Customer support team to ensure client performance and satisfaction
• Advise customer support team to correct inefficient uses of energy, both technically and procedurally and to support with data justification
• Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

Organise and develop the team:

• Coach and train Central Maintenance engineers
• Drive talent recruitment and development for the department in alignment with organisational strategy

Qualifications

• Diploma/Degree in Electrical or Mechanical Engineering, Controls, Energy or Environmental Engineering.
• Possess people management experience
• 2-5 years’ experience in an Energy or Mechanical Engineering is an added advantage
• Professional Energy/Sustainability related certification a plus
• Qualification in Refrigeration and Air-conditioning and Energy Management will be an added advantage
• Well versed with HVAC systems, basic knowledge, good understanding on ACMV system and equipment
• Ability to understand piping and ducting and to oversee installation of instrumentation works (power meters, temperature sensors, and pressure sensors).
• Strong written and oral communication skills for customer interaction and report writing
• A willingness to learn and work in a team environment with extensive contact with clients
• Strong communication skills with the ability to work autonomously
• Self-starter with strong analytical and troubleshooting skills
• High level of initiative with the ability to work under pressure and extended hours, if required to meet deadlines