Total 319 maintenance repair job vacancies in florida usa

The duties of this position include but not limited to:

• Starts, stops, and regulates the utilities and their system components.
• Ensures that steam pressure is maintained at all times.
• Responsible for changing charts, receiving fuel oil shipments, monitoring the central liquid oxygen levels, and preparing orders for materials and/or services.
• Provides preventative maintenance according to predetermined routine guidelines on various mechanical equipment and systems.
• Makes decisions based on data trends to determine the need for adjustment and/or repair.
• Follows instructions and operating procedures and conveys ideas both orally and in writing.
• Troubleshoots, maintains, and repairs system components.
• Resolves emergency heating, ventilation, and air conditioning calls.

Work Schedule: 12 hour rotating shifts or as required for Medical Center coverage determined by URSO Supervisor
Position Description Title/PD#: Utility Systems Repair Operator/PD02727A and PD02727A
Critical Skills Incentive (CSI): Not Approved
Relocation/Recruitment Incentives: Not authorized

Starting at $34.58 Per Hour (WG 11)

Such assignments may include but not limited to:

• Assists maintenance workers in performing general maintenance, repair and/or alterations to such items as: doors, floors, floor covering, walls, ceiling, windows, electrical switches, receptacles and light fixtures, commodes, wash basins and showers.
• Assists in performing repair of recreation/mess equipment and appliances and other related maintenance and/or custodial duties.
• Assists in the performance of simple plumbing repairs, replacing faucets or washers; repairing toilet flushing devices; clearing clogged drains, and tightening leaking pipe joints.
• Assists in the performance of light maintenance on air conditioning units and intermediate maintenance on equipment in the facility.
• May assist in the performance of minor electrical repairs to switches and boxes, and replace electric lights, fuses and fixtures.
• Drives motor vehicles to and from work sites, warehouses, and dumps.
• Maintains maintenance shop in a safe and clean condition.
• Observes environmental, safety, security and housekeeping rules and regulations.
• Performs a varied of recurring duties to maintain and ensure upkeep of all MWR department ball fields,parks/picnic areas and outdoor recreational areas throughout a multitude of MWR programs CAT A,B, and C.
• Dragging, raking, installing bases, home plates and pitching rubbers, laying out foul lines and playing field boundaries, repairing backstops, and mowing grass on near all MWR recreational facilities.
• Trims, edges, rakes and mows grass at all assigned MWR recreational areas and playing fields.
• Polices all MWR assigned areas, collects and disposes of trash and garbage, usually using a pickup truck or light duty vehicle to transport to disposal area.
• Operates a light duty vehicle, grounds maintenance equipment, which includes weed eater, trimmers, edgers, backpack blowers, push and riding mowers.
• Assist in the preparation of activities, indoor and outdoor, for special events and program support.
• Performs other duties as assigned.

Starting at $23.59 Per Hour (NA 5)

A selectee receiving a first appointment to the Federal Government (Civil Service) is entitled only to the lowest step of the grade for which selected. The display of a salary range on this vacancy shall not be construed as granting an entitlement to a higher rate of pay.

Major Duties:

• The primary function of Maintenance Workers is to clean restrooms, stock restroom supplies and clean other facilities by vacuuming, sweeping, dusting and cleaning windows.
• In addition, maintenance workers collect and dispose of trash from roadsides and parking lots, remove limbs and other obstructions from roadsides and grounds.
• Maintenance workers also operate small equipment such as leaf blowers, string trimmers and hedge trimmers; in addition to operating push lawn mowers and zero turn mowers.
• Maintenance Workers also perform minor maintenance duties on all park facilities and historical structures and assist higher-level tradesmen on more complex tasks.
• Maintenance Workers most often work alone and possess all necessary authority and autonomy to execute normal duties.

Starting at $21.42 Per Hour (WG 5)

Responsible for the maintenance and repair of the institution buildings and structures, through the supervision of inmate workers.

Supervises and trains inmate workers in various phases associated with the construction, repair, maintenance, and renovation of buildings and related structures, grounds, fixtures and utilities, requiring the use of a variety of trade practices such as carpentry, masonry, plumbing, cement work, painting, welding, roofing, and other related trades.

Responsible for design and development of plans, specifications and blueprint drawings.

Responsible for adhering to safety procedures for hazardous material handling, OSHA requirements, and environmental issues.

Responsible for the ordering and purchasing of all material/equipment needed to perform assigned projects.

Along with all other correctional institution employees, incumbent is charged with responsibility for maintaining security of the institution. The staff correctional responsibilities precede all others required by this position and are performed on a regular and recurring basis.

Starting at $37.70 Per Hour (WS 08)

Leadership duties to include:

• Pass on instructions received from supervisors to team members, getting work started and assigning the immediate tasks to be performed by individual team members;
• Working alongside team members and setting the pace;
• Demonstrating proper work methods;
• Ensuring that needed plans, blueprints, materials and tools are available, and that needed stock is obtained from supply storage areas;
• Obtain needed information or decisions from supervisors on problems that arise during the work;
• Maintaining a current knowledge, and answering questions of the other workers on procedures, policies, written instructions and other orders;
• Seeing to it that there is enough work to keep everyone on the team busy;
• Checking work in progress and when finished to ensure the supervisor's instructions on work sequence, procedures, methods, and deadlines have been met;
• Urging or advising other team members to follow instructions received from supervisors and to meet deadlines;
• Assuring that team members follow safety and housekeeping rules;
• Report to supervisors the status and progress of work, and any causes of work delays;
• Answer questions of supervisors on overall work operations and problems, such as the need for additional on-the-job training.

Work to be performed:

Interprets construction and project renovation blueprints, prepares layouts and sketches, prepares purchase requests for tools, material and equipment needed to ensure. Work must be accurate and to specifications according to job requirements. Performs work in at least two of the following trades in the maintenance and repair of grounds, exterior structures, buildings and related fixtures and utilities from initial layout to completion.

Plumbing: installs, modifies and repairs new and existing utility, supply and disposal systems and equipment such as sewage, water, oil and gas distribution systems, water closets, tubs, fire sprinkler systems and showers. Works from building plans, blueprints and sketches.

Carpentry: Uses skilled techniques to construct, install, repair and modify wood and wood substitute structures and items requiring close tolerance fit and structural soundness. Assembles items using a variety of joining techniques and are skilled in the operation of general and precision carpentry and wood working equipment and are able to produce finished products with precise fits, accurate dimensions and acceptable appearance.

Painting: Performs special coating methods such as marbling and graining using coating materials prepared in special as well as common ways and by applying coating techniques that ensure surfaces have a smooth-textured and decorative appearance and meet thickness and level requirements.

Electrical: Installs, modifies repairs, maintains, and troubleshoots, tests and loads new and existing electrical lines, circuits, systems, associated fixtures, controls and equipment at a skilled journeyman level. Works from building plans, blueprints, wiring diagrams, engineering drawings, and electrical maintenance and repair manuals to plan and lay out the routing, replacement, type, size, gauge, balance, load, continuity and safe operation of electrical lines and lighting, circuits, systems, equipment and controls. Determines and places distribution panels, junction boxes, fittings and connections and Installs wiring, couplings, conduit, relays, fixtures, transformers and other electrical devices. Plans and lays out work, tracing hard-to-locate defects or problems and completing repairs and installations with little or no technical advice using a wide variety of test equipment such as voltmeter, ammeter, wattmeter and ohmmeter.

Masonry: Plans and lays out work to be done for repair, alteration or construction of exterior and interior surfaces and structures built of brick, block, glass block, terra cotta, stone and various artificial and natural stone. Cuts and shapes materials used for constructing and repairing window and door openings and corners. Ensures courses are laid evenly and that completed work blends with existing brickwork.

Observes required safety, sanitation and hazardous waste disposal rules and regulations. Operates vehicle to transport tools and materials to work site.

Performs other related duties as assigned.

Starting at $31.34 Per Hour (NA 10)

PRIMARY PURPOSE: To serve as Deputy to the Special Operation Maintenance Group (SOMXG) Commander in a group with more than 1500 funded authorizations. With the commander, the incumbent oversees the complex, numerous, and varied day-to-day aircraft maintenance activities that the SOMXG provides to the installation mission. The incumbent is authorized to make technical and executive decisions for the SOMXG Commander in all areas of functional responsibility; represents the group and the commander at meetings, conferences, official functions, and community events; and, when acting as the senior group official in the absence of the commander, possesses the same authority and prerogatives as the commander, excluding UCMJ authority which is vested in military officers only. Exercises executive level supervisory and managerial authorities.

DUTIES:

1. As deputy to the commander, plans, organizes, and oversees the day-to-day support activities that the SOMXG provides to the installation.
2. Exercises supervisory personnel management responsibilities.
3. Represents SOMXG with a variety of installation and functional area organizations.
4. Participates in special projects and initiatives and performs special assignments to include long-term planning, functional/technical advice and guidance, and continuity of management.

Starting at $122,198 Per Year (GS 14)

• You will analyze scheduling data to determine necessary corrective actions that will improve maintenance schedule performance.
• You will determine manpower needs or material requirements based on projected maintenance work.
• You will complete scheduled maintenance work within established timeframes and guidelines.
• You will confirm measuring instruments (e.g., mechanical, electrical, and electronic) are operational.
• You will determine materials used to meet maintenance and operations project requirements.

Starting at $41.78 Per Hour (WS 10)

• You will operate electrical test equipment (e.g., voltage detectors, multimeters) to determine the presence of electrical energy.
• You will conduct visual inspections and operational tests to determine the need for maintenance or repair work.
• You will lay out job systems and components from blueprints and sketches in compliance with federal, state, and local codes.
• You will follow instructions specified in work orders to perform maintenance and repair work.

Starting at $32.09 Per Hour (WG 10)

As a SURFACE MAINTENANCE REPAIRER (TITLE 32), WG-5801-8, you will perform limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assist higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Make routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Perform work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. Perform limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determine when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.

PHYSICAL EFFORT: Work is performed in tiring or uncomfortable positions for long periods. There is frequent standing, bending, reaching, stretching, climbing, and crouching; or working on top of, under, and in tight compartments or cramped or awkward positions. Performs strenuous work while standing, lying, or sitting. Frequently lifts and carries items, unassisted, weighing up to 40 pounds; and often exerts similar effort in pushing, pulling, and positioning parts, assemblies, and equipment. Frequently lifts and moves heavier items with the assistance of other workers or with lifting devices such as jacks, hoists, and cranes. May be required to work from ladders or work platforms at varying heights.

WORKING CONDITIONS: Work is performed both inside and outside. When inside, the incumbent is frequently exposed to drafts, changing temperatures, and noise which is difficult to talk above. When outside, the incumbent is exposed to bad weather, in mud or snow, and in wet or icy areas. The incumbent is frequently exposed to irritations or discomfort from dust, heat, fumes, and hard damp floors or ground. Typically works on parts and systems, which are dirty, oily, or greasy. Frequently exposed to the possibility of cuts, burns, bruises, and sprains while repairing, positioning, and moving equipment. Often exposed to the possibility of falls while repairing, positioning, and moving equipment; and skin irritations from acid, fluids, and lubricants. Uses safety equipment such as protective ear devices, hard hats, hard-toe shoes, respirators, and protective clothing, which may be uncomfortable to wear or use and may be worn or used for long periods.

Starting at $24.66 Per Hour (WG 8)

As a SURFACE MAINTENANCE REPAIRER (TITLE 32), WG-5801-8, you will perform limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assists higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Make routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Perform work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. Perform limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determine when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.

PHYSICAL EFFORT: Work is performed in tiring or uncomfortable positions for long periods. There is frequent standing, bending, reaching, stretching, climbing, and crouching; or working on top of, under, and in tight compartments or cramped or awkward positions. Performs strenuous work while standing, lying, or sitting. Frequently lifts and carries items, unassisted, weighing up to 40 pounds; and often exerts similar effort in pushing, pulling, and positioning parts, assemblies, and equipment. Frequently lifts and moves heavier items with the assistance of other workers or with lifting devices such as jacks, hoists, and cranes. May be required to work from ladders or work platforms at varying heights.

WORKING CONDITIONS: Work is performed both inside and outside. When inside, the incumbent is frequently exposed to drafts, changing temperatures, and noise which is difficult to talk above. When outside, the incumbent is exposed to bad weather, in mud or snow, and in wet or icy areas. The incumbent is frequently exposed to irritations or discomfort from dust, heat, fumes, and hard damp floors or ground. Typically works on parts and systems, which are dirty, oily, or greasy. Frequently exposed to the possibility of cuts, burns, bruises, and sprains while repairing, positioning, and moving equipment. Often exposed to the possibility of falls while repairing, positioning, and moving equipment; and skin irritations from acid, fluids, and lubricants. Uses safety equipment such as protective ear devices, hard hats, hard-toe shoes, respirators, and protective clothing, which may be uncomfortable to wear or use and may be worn or used for long periods.

Starting at $23.49 Per Hour (WG 8)

As a SURFACE MAINTENANCE REPAIRER (TITLE 32), WG-5801-8, you will perform limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assist higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Make routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Perform work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. Perform limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determine when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.

PHYSICAL EFFORT: Work is performed in tiring or uncomfortable positions for long periods. There is frequent standing, bending, reaching, stretching, climbing, and crouching; or working on top of, under, and in tight compartments or cramped or awkward positions. Performs strenuous work while standing, lying, or sitting. Frequently lifts and carries items, unassisted, weighing up to 40 pounds; and often exerts similar effort in pushing, pulling, and positioning parts, assemblies, and equipment. Frequently lifts and moves heavier items with the assistance of other workers or with lifting devices such as jacks, hoists, and cranes. May be required to work from ladders or work platforms at varying heights.

WORKING CONDITIONS: Work is performed both inside and outside. When inside, the incumbent is frequently exposed to drafts, changing temperatures, and noise which is difficult to talk above. When outside, the incumbent is exposed to bad weather, in mud or snow, and in wet or icy areas. The incumbent is frequently exposed to irritations or discomfort from dust, heat, fumes, and hard damp floors or ground. Typically works on parts and systems, which are dirty, oily, or greasy. Frequently exposed to the possibility of cuts, burns, bruises, and sprains while repairing, positioning, and moving equipment. Often exposed to the possibility of falls while repairing, positioning, and moving equipment; and skin irritations from acid, fluids, and lubricants. Uses safety equipment such as protective ear devices, hard hats, hard-toe shoes, respirators, and protective clothing, which may be uncomfortable to wear or use and may be worn or used for long periods.

Starting at $24.16 Per Hour (WG 8)

As a SURFACE MAINTENANCE REPAIRER (TITLE 32), WG-5801-8, you will perform limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assist higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Make routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Perform work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. Perform limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determine when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.

PHYSICAL EFFORT: Work is performed in tiring or uncomfortable positions for long periods. There is frequent standing, bending, reaching, stretching, climbing, and crouching; or working on top of, under, and in tight compartments or cramped or awkward positions. Performs strenuous work while standing, lying, or sitting. Frequently lifts and carries items, unassisted, weighing up to 40 pounds; and often exerts similar effort in pushing, pulling, and positioning parts, assemblies, and equipment. Frequently lifts and moves heavier items with the assistance of other workers or with lifting devices such as jacks, hoists, and cranes. May be required to work from ladders or work platforms at varying heights.

WORKING CONDITIONS: Work is performed both inside and outside. When inside, the incumbent is frequently exposed to drafts, changing temperatures, and noise which is difficult to talk above. When outside, the incumbent is exposed to bad weather, in mud or snow, and in wet or icy areas. The incumbent is frequently exposed to irritations or discomfort from dust, heat, fumes, and hard damp floors or ground. Typically works on parts and systems, which are dirty, oily, or greasy. Frequently exposed to the possibility of cuts, burns, bruises, and sprains while repairing, positioning, and moving equipment. Often exposed to the possibility of falls while repairing, positioning, and moving equipment; and skin irritations from acid, fluids, and lubricants. Uses safety equipment such as protective ear devices, hard hats, hard-toe shoes, respirators, and protective clothing, which may be uncomfortable to wear or use and may be worn or used for long periods.

Starting at $24.16 Per Hour (WG 8)

As a SURFACE MAINTENANCE MECHANIC (TITLE 32), WG-5801-10, you will troubleshoot, perform maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Utilize embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Remove and disassemble engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Make the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Conduct readiness and repair inspections on vehicles and associated equipment supported by the activity.

PHYSICAL EFFORT:Work is performed in tiring or uncomfortable positions for long periods. There is frequent standing, bending, reaching, stretching, climbing, and crouching; or working on top of, under, and in tight compartments or cramped or awkward positions. Performs strenuous work while standing, lying, or sitting. Frequently lifts and carries items, unassisted, weighing up to 40 pounds; and often exerts similar effort in pushing, pulling, and positioning parts, assemblies, and equipment. Frequently lifts and moves heavier items with the assistance of other workers or with lifting devices such as jacks, hoists, and cranes. May be required to work from ladders or work platforms at varying heights.

WORKING CONDITIONS: Work is performed both inside and outside. When inside, the incumbent is frequently exposed to drafts, changing temperatures, and noise which is difficult to talk above. When outside, the incumbent is exposed to bad weather, in mud or snow, and in wet or icy areas. The incumbent is frequently exposed to irritations or discomfort from dust, heat, fumes, and hard damp floors or ground. Typically works on parts and systems, which are dirty, oily, or greasy. Frequently exposed to the possibility of cuts, burns, bruises, and sprains while repairing, positioning, and moving equipment. Often exposed to the possibility of falls while repairing, positioning, and moving equipment; and skin irritations from acid, fluids, and lubricants. Uses safety equipment such as protective ear devices, hard hats, hard-toe shoes, respirators, and protective clothing, which may be uncomfortable to wear or use and may be worn or used for long periods.

Starting at $30.13 Per Hour (WG 10)

The primary purpose of this position is: To serve as an Air Reserve Technician (ART) to serve as the Maintenance Operations Superintendent providing staff support to unit maintenance activities including but not limited to contingency/war/mobility planning; budgeting; maintenance planning and scheduling, productivity data analysis, and training, maintenance operations center, maintenance supply support; manpower; support agreements; and other. Plans, organizes, coordinates, and directs full-time activities of the Maintenance Operations and advises the Maintenance Group (MXG) Senior ART concerning assigned programs.

Duties:

1. Manages, develops, and directs key programs and activities for Maintenance Operations and the Maintenance Group (MXG).
2. Directs the accomplishment of a variety of special projects/studies for the wing/group.
3. Provides technical and administrative supervision over a work force of civilian and ARTs.
4. Represents Maintenance Operations at conferences, working groups, management reviews as well as with a variety of installation and functional area organizations.
5. Plans for and supports preparations to provide aircraft maintenance and logistics personnel, equipment, supplies and expendables to sustain both wartime and peacetime operations.
6. Advises the Maintenance Group senior ART/Commander on maintenance support matters.

Starting at $72,553 Per Year (GS 11)

• Plans and lays out work from blueprints, sketches, drawings, specifications, guides, codes, and work orders.
• Troubleshoots HV AC/R systems with complex problems and extensive repairs requiring judgment to locate
  malfunctions.
• Installs, repairs, and maintains large commercial and industrial ventilation, refrigeration, air conditioning
  (AC), and cooling systems with complex problems and extensive repairs.
• Installs, modifies, overhauls, repairs, and maintains a variety of complex beating boilers and/or heating.
  systems, single and multiple fuel power boilers, and associated auxiliary and pollution control equipment.
• Performs essential electrical work incidental to the maintenance and operation of HV AC/R systems.
• Performs preventive maintenance on HV AC/R systems and equipment..

Starting at $32.09 Per Hour (WG 10)