Total 43 maintenance repair job vacancies in davis monthan afb arizona

• Lead team members in timely completion of monthly scheduled workload and unscheduled breakdown maintenance.
• Distribute and balance workload among team members in accordance with established policy and immediate priorities.
• Diagnose malfunctions, troubleshoot to isolate failures, and complete repairs in a wide variety of diagnostic and therapeutic medical and dental equipment.
• Perform scheduled preventive maintenance, calibration, function verification, and safety testing on a wide variety of diagnostic and therapeutic medical and dental equipment.
• Advise management, professional staff, and executive management on technical matters regarding maintain/upgrade/replace decisions within particular area of expertise.

• The duties may include, but are not limited to:
• Performs basic preventive maintenance of existing air conditioning equipment and refrigeration units with a scheduled maintenance check list.
• Performs basic electrical repairs and maintenance, to include changing defective switches, receptacles, electric motors, fixtures, and small appliances.
• Performs a variety of routine plumbing tasks.
• Performs general maintenance tasks on steam equipment such as checking pressure gauges and regulators; and reports any defects.
• Performs standard sheet metal work from a pattern provided, including cutting, bending, rolling, and joining with materials such as galvanized steel, aluminum, and stainless steel.
• Performs routine ground maintenance such as spraying, watering, raking, and general upkeep of facility grounds.
• Operates forklift after receiving training and certifications from local or state agencies to do so when required.

Requires a general knowledge of carpentry, minor electrical work, plumbing, painting and related trades. Repair surfaces by such methods as sanding, scraping, or wire brushing for applications of coating materials such as painting, staining, varnishing or shellacking on furniture on furniture, dry walls, ceilings, trims, etc. cutting and installing carpet. Repairs and performs preventative maintenance on small equipment and appliances to include hand tools, vacuums, irons, installs hardware to repair sluggish drains, replace washers and tighten screws on fittings or faucets. Remove and replace minor electrical items such as wall switch covers, etc., fill out and complete AF Form 332 for Civil Engineering attention. Coordinate work with CE and other agencies to complete projects. Load, unload or relocate heavy and or bulky items from trucks conveyances, carry and assemble or reassemble items. Use heavy power equipment, mowers etc., adjust, clean, oil and preform maintenance. Cut and trim trees and shrubs. Operates a variety of vehicles including trucks, sedans, and crew cab pickup trucks that weigh up to 10,000 lbs., plow trucks and other snow removal equipment. Completes records and accident reports. Purchases equipment/repair parts as needed. Identifies to supply personnel large costs/quantity items needed to perform work. Performs other related duties as assigned.

If interested in applying for this position you may preview the online application: https://apply.usastaffing.gov/ViewQuestionnaire/12622272

This position works under a trails maintenance leader or other higher-graded employees. The incumbent primarily assists in maintenance and construction of graded and paved trails, trail drainage, trail bridges, and guard rails. Assists in the installation, repair and replacement of water diversion bars, cribbing and retainer walls. Removes windfalls, rockslides, surface outcroppings and debris from trails. Builds up tread surfaces in eroded areas. Installs stepping stones at creek crossings where bridges cannot be constructed. Safely and effectively, uses hand power tools required for the job and has the ability to maintain these tools properly. May perform work on roads, trail signs, parking lots, boundary fence; corral repair and construction.

The purpose of this position is to perform minor construction and repair on existing structures involving standard measurements, specifications, instructions, and basic shop mathematics. Installs exterior and interior trim using preplanned materials, such as baseboard, and molding. Replaces broken or missing acoustical ceiling tile, broken door and window trim, window screens, stairway steps, wooden porches, door jambs, and other damaged wood components. Interprets specifications, such as work orders with sketches or easily understood blueprints and technical instructions to plan and layout work. Repairs and refinishes furniture and repairs.

Follow inspections conducted by incumbent or specific information (work orders), locates and makes repairs to plumbing that can be accomplished by installing, removing, cleaning, replacing, modifying, package, and sealing defective parts of utility, supply, gas distribution, and disposal systems such as dirty traps, sections of broken tile or pipe, and leaky drains using existing routes, openings, hangers, and levels. Caulks and seals such things as elbows, union joints, and tiles or pipes, faucets, and shower drains. Checks operation and completes needed repairs to small parts and sections of existing systems, such as water heaters, disposal units, and faucets.

Prepares wood and metal surfaces to be painted; mixes and prepares coating aerial, and applies coating materials. Prepares surfaces by scraping, wire brushing, masking, spackling, and sanding surfaces. Mixes and thins coating materials to obtain desired consistency following specific written directives. Applies coating materials, such as primers, paints, varnishes, and shellacs, using standard application techniques and ensures that the coating finish meets surface protection requirements.

Makes minor electrical repairs by replacing fixtures, switches, stove burners, electrical cords, bulbs, and fluorescent fixtures. Responsible for the maintenance and upkeep of gasoline powered equipment to ensure equipment is in good mechanical and safe operating condition. Performs routine maintenance such as oil change, minor adjustments, spark plugs cleaning and replacement on such equipment. Performs routine inspection and minor maintenance on Lodging vehicles to include oil change, battery checks, condition of brakes, filling tanks with gasoline, checking fluid levels, hoses and filters, changing fan belts, and replacing lights.

Required to move equipment, furniture, and supply items between quarters, supply room and warehouses. Drives vehicles weighing up to I0,000 pounds to various locations both on and off base. May operate a government vehicle to include light truck, sedan, golf cart, etc.

If interested in applying for this position you may preview the online application: https://apply.usastaffing.gov/ViewQuestionnaire/12620453

• Performs the simpler aµd more routine tasks of the plumbing trade.
• Performs simpler and more routine carpentry duties.
• Performs simpler and more routine duties of the air conditioning equipment trade.
• Provides support for all crafts in the Operations and Maintenance(O&M) section.
• Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.

The primary purpose of this position is to serve as the Senior Air Reserve Technician (ART) Officer with overall supervision and management of either an Aircraft Maintenance Squadron, a Maintenance Squadron, an Equipment Maintenance Squadron or a Component Maintenance Squadron at an Air Force Reserve Command (AFRC) unit-equipped or associate unit.

RESPONISIBILITIES:
1. Plans, organizes, and oversees the activities of the squadron. Manages assigned maintenance resources and ensures production meets operational requirements and technical standards. Recommends procedural and technical improvements and modifications.
2. Exercises supervisory personnel management responsibilities to include personnel and position management, equal opportunity, security, and safety. Advises employees regarding policies, procedures and directives of management. Maintains sound positions management practice when determining types and numbers of positions to support the organizational mission.
3. Represents organization with a variety of installation and functional area organizations. Establishes, develops, and maintains effective working relationships with internal and external customers. Meets with key customers and coordinating officials to assess customer satisfaction, explain organization policy and procedures, and resolves significant problems that arise.

• As deputy to the commander, plans, organizes, and oversees the day-to-day operations of the Maintenance Group. Provides executive leadership and managerial insight to subordinate 27 SOMXG squadrons.
• Exercises supervisory personnel management responsibilities. With the 27th Special Operations Maintenance Group (SOMXG) Commander, directs, coordinates, and oversees the work of more than 1600 personnel, comprised of three maintenance squadrons and one maintenance operations support squadron.
• Represents the 27 SOMXG Commander with a variety of installation and functional area organizations. Establishes, develops, and maintains effective working relationships with installation command; commanders and deputies of other groups on the installation;
• Manages assigned resources to achieve peak mission support with greatest economy. Analyze operational trends forecasts requirements and identifies shortfalls.
• Participates in special projects & initiatives & performs special assignments to include long-term planning, functional/technical advice & guidance & continuity of management from the Maintenance perspective.

This position is located with the CSMS in Phoenix, AZ. The purpose of this position is to troubleshoot, repair, maintain, inspect, and/or overhaul a variety of complex combat, tactical, commercial, and special purpose vehicles and equipment having complicated mechanical and non-mechanical systems with a variety of interconnected systems. Provides technical guidance and specialized team leadership to lower grade employees.

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.

Responsible for the maintenance and upkeep of equipment to make sure they are in good mechanical and safe operating condition. Performs routine inspection and minor maintenance on all vehicles assigned to Outdoor Recreation. Uses and maintains tools and equipment. Utilizes hand and power tools such as but not limited to: drills, power saws, routers, standard hand tolls, straight edge, chalk line, tapes, rules, caulking items, pipe wrenches, rollers, putty knife, etc. Must maintain all current certification required to complete all assigned tasks (ie HAZMAT, Safety, Motor Vehicle Operating, etc). Drives/operates vehicles/equipment weighing up to 10,000 pounds at various locations both on and off base. Operates field-type tractors with attachments to maintain the grasses and brush in all areas. Operates Snow Removal and Grooming Equipment to include Snow Maker. Performs other related duties.

Physical Effort: The work requires considerable bending, standing, kneeling, climbing, and stooping. On site work requires physical exertion when handling heavy and bulky materials. Work typically requires climbing ladders. Frequently caries and lifts materials and equipment weighing up 40 pounds unassisted, and occasionally lifts or moves heavier items with the assistance of lifting devices or other workers.

If interested in applying for this position you may preview the online application: https://apply.usastaffing.gov/ViewQuestionnaire/12625699

Duties include but are not limited to the following:

• Install and repair a variety of commercially manufactured locking devices, including combination locks which are typically installed i.e., security units as safes, vaults, cabinets and chests.
• Set up coding systems involving varying types of locks and keyways.
• Utilize arithmetic in setting up a coding system and selecting the correct size of pins.
• Troubleshoot lockouts in mechanical security system to determine which components are malfunctioning.
• Interpret technical manuals and specifications when testing and repairing locking mechanisms.
• Fabricate parts when they are not available in the shops stock, reshapes parts by grinding and filing.
• Solve problems that require decisions when modifying and reworking locking devices for special security objective.
• Improvise and apply advanced neutralization techniques.

Be a successful applicant. Watch this 5 minute video to learn how to create a federal resume.

Major Duties:

• Incumbents to this position will be required to use a variety of hand and power tools to perform trail repair and construction work. This work is performed in front-country and remote wilderness locations often employing minimum tool standards and techniques.
• These responsibilities include but are not limited to digging ditches, stone wall repairs, grading trail surfaces and installing water-bars and retainer-bars.
• To facilitate construction of these features you will be required to operate jackhammers, chainsaws, gas-powered drills, picks, rock-bars, hammers, shovels, and various other hand and power tools.
• Some tools require certification prior to operation. You will be required to obtain and provide certification documents prior to use of these tools.
• If selected for this position, you will be required to operate a vehicle for traveling to and from the jobsite.

• Instructs students through assigned blocks of instruction at basic and/or advanced levels.
• Develops and/or revises lesson plans and training materials for fighter crew chief curriculum.
• Monitors and evaluates student progress and performance.
• Inputs necessary data into the Technical Training Management System (TTMS).
• Maintains professional and technical expertise.

• Conducts classroom, laboratory or field instruction
• Develops and/or revises training materials
• Evaluates student progress and performance
• Counsels students to identify and help resolve problems as required
• Maintains professional and technical expertise
• Accomplishes special projects

As a SURFACE MAINTENANCE MECHANIC INSPECTOR, WG-5801-11, you will perform the following duties:

(1) Inspects a large variety of heavy-duty mobile equipment (i.e., combat, tactical, etc.) and automotive vehicles (i.e., attack tanks, large cranes, tank retrievers, fire trucks, bridge transporters, armored vehicle launched bridges, bulldozers, road graders, crawler tractors, power shovels, self propelled earth compacting equipment, self propelled artillery, etc.). May also inspect heavy artillery, small arms, powered support and other equipment or components of equal or lesser complexity. May assist higher-graded inspectors to perform inspections on equipment repairs.

(2) Inspects complex, interrelated mechanical, hydraulic, pneumatic, electronic and electrical systems, equipment and their components while in operation or in a standby condition. Inspects and performs tests to braking, steering, and differential systems, which are mechanically integrated with the transmission; to large engines, which directly power multiple hydraulic and pneumatic systems; to intricate fuel injection systems; to turret stabilization systems; and to other systems combined in a single, complex mechanical assembly. Uses specially designed testing methods and test equipment such as computerized test sets, precision gauges, electronic sensors, injector test stands, engine scopes, etc., to assure that tolerance and safety factors have been met.

(3) Inspects equipment to determine repairs needed. Utilizes established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s). Considers a variety of factors such as cost and availability of parts, man-hours, and impact of time constraints on the mission to assess whether repair is economical. Recommends to a higher echelon to condemn equipment when the repair costs exceed the established MEL. Prepares lists of needed repairs, parts, and man-hours authorized. Performs in-process inspections to assure that equipment is being repaired in accordance with pertinent requirements. Performs final inspection, certifying that equipment is in satisfactory operating condition, or rejects the work and returns the equipment to the repair shop with specific reports prescribing additional repairs.

(4) Serves as inspector on Command Maintenance Evaluation Teams (COMET) and/or as a member of Maintenance Assistance and Instruction Teams (MAIT).

(5) Performs other duties as assigned.

*The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description (PD#:D1285000). https://acpol2.army.mil/ako/fasclass/search_fs/search_fasclass.asp