Total 8 engineering job vacancies in ipswich ip1 5en

Lecturer in Agricultural Engineering
Within the range of £27,027 to £40,872 per annum pro-rata
35 hours per week, 52 weeks a year

Are you keen to share your skills, knowledge and experience? Would you like a rewarding career in education? We are seeking to recruit qualified professionals in land-based engineering, and who have the ability to share their passion and enthusiasm, and have the ability to encourage and inspire young people.

Required to teach and assess Land-based engineering related subjects up to Level 3 to a wide range of students, you should have relevant up-to-date industry experience in Land-based engineering, supported by a relevant Level 3 qualification or industry related equivalent.

Suffolk New College can provide relevant teacher training to those individuals who can demonstrate the potential to become effective teachers.

This post is based at Suffolk Rural campus, however Suffolk New College is a multi campus therefore you may be required to work at and travel between campuses.
At Suffolk New College, we promote the culture of BeSNC. Implementing BeSNC is not just a choice; it's a commitment to providing the best possible environment for our learners to thrive. It's a commitment to nurturing an inclusive and supportive community where each student, staff and community member can reach their full potential.

Suffolk New College reserves the right to close an advertisement early if we receive sufficient applications for the role.

For further information, please visit www.suffolk.ac.uk

Closing date: Sunday 1st December 2024 at 12:00 Midnight
Interview date: To be Confirmed

This College is committed to safeguarding and promoting the welfare of young people and expects all staff to share this commitment. As part of our on-going commitment to Equality and Diversity, Suffolk New College guarantee to short list all applicants from a black or ethnic minority group who meet the essential criteria and all applicants with a disability who meet the essential criteria. All appointments are subject to Disclosure & Barring Service (DBS) check.

We do not recognise any agencies or search agencies acting on our behalf unless they have been officially engaged. Applicants should apply to us directly and not be persuaded to go via an agency.
The college will not recognise any agency fees for recruitment activities unless an active engagement linked to a specific role has been agreed.
The college will not pay fees associated with CVs or applicants who are sent to the college via agencies on a speculative basis or in response to college adverts.
Agencies should refrain from sending CVs to anyone working for the college on a speculative basis. The college will make approaches to agencies via our HR team if we feel that we need assistance with a post.

Proud member of the Disability Confident employer scheme

• Provides on-site technical assistance and training to field personnel in installation of conservation practices: parallel terraces, ponds, waterways, irrigation systems, agricultural waste mgmt systems, grass-based rotations, pasture planting, etc.
• Performs construction inspections on simple and complex structures for conservation systems. Performs drafting and other graphical work on a computer-aided drafting system and maintains they system equipment and supplies.
• Determines the type, scope and intensity of field investigations and surveys needed. Directs collection of field data and assures adequacy of collected data.
• Designs and supervises the design of complete engineering practices and structures. Prepares job sheets and designs. Prepares as-built plans. Prepares engineering cost estimates and construction performance time estimates.
• Completes payment requests and referrals pertaining to work completed for cost sharing. Documents layout and construction in conservation assistance notes or job diary.
• Selects and applies standard methods of computation for quantities such as concrete, earth fill and excavation. Develops standard drawings on the CAD system.
• Determines engineering training needs for field office personnel and provides training on surveying and engineering equipment.
• Provides instruction in the use of the National Engineering Manual, the Engineering Field Handbook, Agricultural Waste Manual Field Handbook, State Technical Guide, and various technical releases and handbooks.
• Coordinates quality reviews of conservation practices and checks engineering work of field office personnel.

Starting at $54,292 Per Year (GS 8-9)

Engineering Manager

Cardiff, Wales

Full Time, Permanent

£65,000- £75,000

Monday to Friday- Days 37.5 hours per week.

20% Bonus, enhanced pension scheme, 25 days holiday (+ banks) + comprehensive benefits package.

My client, a nationally recognised energy from waste facility is looking for an engineering / maintenance manager to join their team on a full time, permanent basis. The business continues to grow and the upward trend is set to continue with the industry projected for huge growth in the future.

Working as part of the site leadership team, we are looking for candidates that can meet the following requirements:

• Experience in practical implementation of a corporate management system with a flexible approach to ensure that critical work is achieved in a timely and accurate manner.
• Extensive engineering experience of the process industry or power industry, including the management of PSSR legislation.
• Experience working with Maintenance Management systems.
• Strong leadership skills to lead and develop a new team in a start-up scenario with a no compromise approach to health, safety and environmental compliance, preferably at a senior level within a large department.
• Commercial awareness and budgetary responsibility for maintenance and defect support.
• Experience of contractor management to deliver against KPI's.
• Full UK driving license.

Reporting to the general manager, some of your responsibilities will include:

• Provide strong leadership and guidance to the site engineering team, with a safety first mindset.
• Drive improvement across site to deliver a world class operational facility.
• Planning and coordinating shutdowns
• Managing the CAPEX project lifecycle
• Full responsibility for the engineering and maintenance budgets.

Key words: Maintenance Management Preventive Maintenance Maintenance & Repair Continuous Improvement Manufacturing Lean Manufacturing Maintenance Operations Management 5S Root Cause Analysis Engineering Predictive Maintenance Plant Maintenance Equipment Maintenance Total Productive Maintenance (TPM) Facility Management (FM) Electrical Wiring Six Sigma Process Engineering Kaizen Project Planning Project Management Microsoft Project Strategic Planning Microsoft Access Business Strategy AutoCAD Project Engineering SAP Products Planned Preventative Maintenance

Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.

Candidates must be eligible to live and work in the UK.

For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

About Us

JBS Australia is the largest and most respected meat and food producer in Australia. We have a strong portfolio of leading and renowned beef, lamb, pork, salmon and value-added branded products, such as AMH, Swift, Primo, Murray Valley and Huon.

JBS Australia is a part of the global JBS business, the largest animal protein business in the world, and the second largest food company, with operations in North America, South America, Europe, Australia and New Zealand.

The JBS Dinmore Processing Plant is the largest beef facility in the southern hemisphere. Located near Ipswich, in south east Queensland, the facility has a daily production ability of 3,400 cattle and employs approximately 1,500 people. Cattle are sourced from the finest cattle producing regions to produce a diverse range of pasture fed and grain beef products, from commodity to premium. The renowned AMH brand, the award-winning Yardstick, the highly marbled grain fed Pure Prime and our state’s brand, Queenslander Beef and more are all produced at Dinmore.

Why work for JBS Australia?

Convenient Ipswich location; only 28 minutes from the CBD
Access to heavily discounted JBS meat products
Discounts with national automotive and retail partners
Health insurance discounts with Bupa and Medibank Private
Opportunities for sponsorship
Free onsite parking
Onsite Physio available
EBA site with annual pay increases via level pay systems - Starting Rate; Intermediate Rate (partial experience of the plant); Experienced rate (full understanding of the plant)

About the Role

The JBS Dinmore Plant is currently recruiting a qualified Mechanical Engineering Technician to join the team in a full-time role. Reporting to the Maintenance Supervisor, your key responsibilities will include:

Ensuring the availability, reliability and capability of the plant assets
Monitoring, following-up and addressing issues associated with the implementation and progress of planned and unplanned maintenance tasks
Ensuring the continuous improvement of plant equipment and systems
Communicating all equipment and maintenance issues with the Supervisor and management team
Understanding and implementing quality control techniques
Being actively involved with inspections of equipment undergoing rebuild or repair
Assembling and installing new and modified mechanical assemblies, components, machine tools and controls, and hydraulic power systems
Estimating material costs and quantities, and machine requirements

This is a full-time position (short period of day shifts during the training period) with the potential to earn $100,000 plus superannuation or more with additional allowances and/or overtime.


About You

Mechanical trade qualifications and post-trade experience
Experience in maintenance/repair in a fast-paced manufacturing environment
Thorough understanding of maintenance work management practices
Understanding of work planning and scheduling procedures
Experience gained from a large heavy industry organization
Attention to detail and a sense of urgency
Effective and efficient problem-solving skills
Flexibility to work 12-hour shifts (days/nights) including a possible 24/7 roster in the future

The ad is valid for 28 days.

Interested? APPLY NOW!

AUSTRALIAN CITIZENSHIP REQUIRED FOR THIS POSITION: YesRELOCATION ASSISTANCE: No relocation assistance availableCLEARANCE TYPE: AU-Protected (Baseline)TRAVEL: Yes, 10% of the TimeDescriptionWe want you – your perspective and ideas – to propel us forwardOur interns work on projects in aerospace, engineering, and information technology across our business, with real-world activities, tasks and projects to make a difference. One of our values is a commitment to shared success, so our assurance to you is to give you experiences and exposure preparing you to work with high performing and dynamic teams.What’s in in it for you?12 weeks paid internship.A hands on approach to learningThe unique opportunity to work with talented professionals in a Defence aviation environment.Group MentoringFlexible work hours - Achieve a healthy work/life balance with the opportunity to work a 4.5 day week or 9 day fortnight.Networking and collaboration with other like-minded engineering professionalsApplications must be received by the 28th of April. Your Role:As our new Mission Systems…

Click here to view more detail / apply for Intern - Engineering Mission Systems

Engineering Tradesperson (Fitter and Turner) Req. Id:  7609 Date:  12 Apr 2024 Location:  Ipswich, QLD, AU, 4305 Company:  Queensland Rail About us We are a large and fully integrated business that provides services that are pivotal to the success of Queensland and its people. Our culture is one based around safety and performance.   With a growing investment in rail it is an exciting time to be a part of the changing landscape of SEQ. What Queensland Rail has to offer •    Permanent position based in Ipswich •    $79,000 plus up to 12.75% superannuation •    Free rail travel to and from work discounted rail travel for off-duty travel  •    Ongoing support to develop your experience and skills •    Long-term career and stability with an industry leader  •    We pride ourselves on our Safety Culture, we ‘work safe’ so that everyone goes ‘home safe’ •    Access to our new…

Click here to view more detail / apply for Engineering Tradesperson (Fitter and Turner)

Location Ipswich

Engineering Project Manager

We are looking for an experienced Project Manager with technical skills to support our engineering team to install new conveyor systems within our organisation for a 6 to 9 month fix term contract

Day-to-day responsibilities:

Project planning

Field verification of drawings and identifying interference's with existing/new equipment

Raise updates for different project phases, and address concerns, if any, from different groups, prior to start of works onsite.

Project execution

Set-up and manage daily calls with vendors, Provide daily report summary.

Site visits to verify project progress and gather stakeholder/customer feedback. Frequency of site visits to be agreed, address any concerns during these site visits. Escalate any concerns if needed.

Manage any ordered materials (signage, racking, SBL) to be received onsite, inventory and identify any gaps. Coordinate with Ops/RME to transport materials for the material movement and installation.

Coordinate with IT, obtain IDF keys and monitor IDF cabinets during data cable terminations. Validate cable installation and functionality with IT.

Supporting site acceptance tests (4-5d continuous onsite presence)

Project closure

Obtain all documentation from vendor and validate list against vendor deliverables. Validate basic document content (for ex. Declaration of conformity signed, correct DS name, etc.)

Transfer all documentation to appropriate storage location

Qualifications Experience

Working experience in Industrial, Mechanical, Process Engineering or equivalent

Working experience as Project Manager of medium complex projects

Proficiency in tools: AutoCAD, Microsoft Project, Microsoft Excel

Challenge-trg Recruitment Ltd is acting as an employment business in relation to this vacancy

Proud member of the Disability Confident employer scheme

Recruitment 24/7 has a vacancy for a Workshop Team Leader for our engineering client based in the Ipswich region. This position is full-time and permanent, with a competitive salary on offer pending your skills and experience. A regular production bonus is on offer to complement the generous salary. Previous experience within an engineering and/or manufacturing role preferably as a supervisor/team leader is a requirement. Requirements for this position:

You must have excellent organisational, time management, and people skills to successfully lead and guide your team.
Have had experience working as a supervisor and/or team leader.
Understand basic manufacturing processes and have the willingness to learn.
Hold a valid drivers licence. A forklift licence is desirable but not a necessity. For more information, or to apply, please contact our office on (07) 3281 2489 and ask to speak with Recruitment 24/7's Operations Manager Hanna Andersen. Alternatively, please email your resume to applications@recruitment247.com.au All applications are handled with strict confidentiality. We look forward to receiving your application.
Please click here to apply.