Total 30 engineering job vacancies in exeter devon ex1 1ae

Location: Devonport, Plymouth, GB, PL1 4SG
Onsite or Hybrid: OnSite
Programme Title: Higher Level Engineering Apprenticeship
Level: 4
Salary:
Year 1: £22,393
Year 2: £28,543
Year 3: £33,611
Year 4: £35,422
Location: Devonport, Plymouth
Application closing date: March 2025
Programme start date: September 2025
Role ID: 60372

The Higher Level Engineering Apprenticeship at Babcock is your opportunity to embark on a rewarding career in engineering. Our engineering apprentices are at the forefront of maintaining the Royal Navy's fleet and play an integral role in creating a safe and secure world.

About the Programme:
Join our exciting 3.5-year Higher Level Engineering Apprenticeship programme, where you'll specialise in one of three distinct trades: Mechanical, Electrical, or Naval Architecture.

No matter the trade route you take, you'll be gathering, analysing and interpreting information and data to make impactful decisions and solve real-world problems.

You'll be responsible for creating or updating technical documentation, reports, or specifications that include information on quality, reliability, production schedules, costing, and more. This could include setting out how a product must be designed, manufactured, tested, modified, maintained, stored, transported, commissioned, or decommissioned.

Along the way, you'll gain skills that will set you up for the future which may include:

• Data analysis and interpretation - Extracting, analysing, and interpreting engineering and manufacturing data to draw accurate conclusions and make informed decisions.
• Project Management - Utilising project management tools for effective decision-making and risk assessment.
• Problem-solving - Applying problem-solving techniques such as Root Cause Analysis (RCA) Process Failure Modes Effects Analysis (PFMEA) and more, to identify root causes and enhance quality.
• Lean tools and techniques - Utilising lean tools and techniques such as Six Sigma and 8 Wastes to drive efficiency and minimise waste.
• Computer-based software system/packages - Utilising Computer Aided Design (CAD), Data Analytics, and Databases.
• Documentation control - Ensuring compliance with quality standards through proper documentation and processes.
• Financial planning - Undertaking financial planning, recording, and review processes and documentation such as departmental budgets, estimating, cost control and cost forecasting.
• Communication and stakeholder management - Communicating findings through various media, including presentations and reports.

Throughout the apprenticeship, you'll have the chance to work at various locations on our site, gaining valuable insights into all our operations.

It's a dynamic work environment, where every day brings new opportunities. From conducting external supplier inspections to driving efficiencies on our production shop floor, or even overseeing internal and external audits - your day will be filled with meaningful contributions.

Your education/training:
In the first year, you'll spend your time at college, followed by one day per week in the second and third years, with the remaining four days onsite. The fourth year will be dedicated to onsite training.

During your apprenticeship, you'll have the opportunity to earn a HNC in Engineering. After successfully completing the apprenticeship End Point Assessment, you'll receive a nationally recognised certificate as a Level 4 Engineering Maintenance Technician.

What you'll need:

• A minimum of 5 GCSE's at grade C/4 (Or equivalent) including English and Maths and 3 A-Levels (or equivalent) at grade C or above, including Maths and a Science or Technology based subject.
• Many of our early careers roles are subject to Security Clearance and Trade Control restrictions which mean that your place of birth, nationality, citizenship, or residency you hold or have held may impact which roles you are eligible for. Further details are available at United Kingdom Security Vetting: clearance levels - GOV.UK (www.gov.uk). For our early careers roles, you must be able to achieve BPSS (Baseline security and many of them require you to be eligible for full Security Clearance.

What you'll get:
We will provide you with a supportive and engaging environment where you can grow your career. In addition, you'll benefit from:

• Fully funded qualification
• Personal development training and opportunities
• Minimum 28 days holiday allowance including bank holidays
• Competitive pension scheme
• Employee share scheme
• Flexible benefits including cycle to work scheme and employee shopping savings portal

You'll also have the chance to get involved in our STEM outreach activities and volunteering opportunities, which our apprentices find incredibly rewarding.

Your career development:
It's hard to beat the variety of fantastic opportunities and business experiences you'll receive. You can expect real world encounters and exposure to exciting projects that will really help you navigate where you want to take your career.

Plus, when you join us, you'll be automatically enrolled onto our Apprentice Development Programme. Through a series of digital and face to face sessions, presented by wellbeing and performance experts and our external partners, we will equip you with the knowledge and tools you need to thrive and perform at your very best on your programme and beyond.

Closing dates:
Please be aware that if there is a high level of interest in this programme, applications may close earlier than advertised. To give yourself the best chance of being considered for a place on this programme, please submit your application as early as possible.

#babdestnuc

Proud member of the Disability Confident employer scheme

Engineering Team Lead - Plymouth

Up to £50000 - Day Shift - Matched pension up to 10% - Progression opportunities - Life assurance - Private Medical - 24 days holiday - Cycle to work scheme - Critical cover

If you have experience within a first class manufacturing environment and looking for either a step up or a new opportunity then this one is for you!

A globally known FMCG company in the Plymouth area are looking for an Engineering Team Lead to join their department. This role will involve managing a team of multi skilled engineers, planning maintenance, supporting continuous improvement, coaching team members and developing the maintenance across the department, improving reliability and efficiencies.

Package and Benefits:

• Up to £50000
• Days - Monday to Friday
• Matched pension up to 10%
• Progression opportunities
• Life assurance
• Private Medical
• 24 days holiday
• Cycle to work scheme
• Critical cover

Role & Responsibilities:

• Managing and coaching a team of multi skilled engineers
• Working alongside the maintenance manager to plan maintenance activities (repairs and breakdowns)
• Training and development of staff and keeping skills up to date
• Supporting all continuous improvement objectives
• Manage and executing planned and unplanned maintenance activities
• Thorough record keeping of all maintenance / engineering tasks - SAP

Knowledge, Skills & Experience:

• Manufacturing / FMCG industry experience
• HNC or a degree on engineering/related field
• 5 years of more experience within manufacturing or technical environments
• Electrical and mechanical engineering skills
• Experienced in man management

Please contact Hermione Jones for more information.

Hermione@hunterselection.co.uk | 01275371981

If you are interested in this position please click 'apply'.

Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors.

Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.

For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Location: Devonport, Plymouth, GB, PL1 4SG
Onsite or Hybrid: OnSite
Programme title: Engineering Design and Draughtsperson Apprenticeship
Level: 3
Salary:
Year 1: £15,878
Year 2: £20,312
Year 3: £26,346
Year 4: £31,210
Location: Devonport, Plymouth
Application closing date: March 2025
Programme start date: September 2025
Role ID: 60315

Do you want to turn your passion for engineering design into a rewarding career? Our 4-year apprenticeship gives you hands-on CAD experience creating advanced designs for the Royal Navy fleet.

About the programme:
This is no ordinary engineering apprenticeship. As a design and draughtsperson, you'll produce detailed drawings, models and specs to guide the manufacture and maintenance of state-of-the-art maritime vessels and infrastructure.

Focusing on electrical, mechanical or structural design, you'll work on varied projects including submarine and warship refits. Using the latest CAD software and following codes and standards, you'll help to solve real-world engineering challenges.

You'll gain a broad range of skills including:

• Interpreting technical specifications.
• Assessing design factors and constraints.
• Creating CAD models and drawings.
• Evaluating and refining designs.
• Communicating options to stakeholders.

You'll also have the opportunity to embark on work placements across the site, gaining valuable insights into various operations from a design perspective.

This will prepare you to join a specialised team of designers who work on a diverse range of projects, including design packages to support submarines and surface vessels.

Your education/training:
You'll spend an initial period of time at City College, Plymouth, learning the basics. Then you'll put theory into practice as you alternate college and onsite work in the remainder of year 1 and years 2 and 3. In year 4, you'll be fully immersed, solving challenges alongside experienced designers.

Along the way, you'll study towards a Level 3 BTEC Diploma in Advanced Manufacturing Engineering to complement your on-the-job training.

Future prospects:
On finishing your apprenticeship, you'll be ready to start an exciting career as an Engineering Design and Draughtsperson, supporting the Royal Navy's fleet.

What you'll need:

• At least 5 GCSEs at grade C/4 including English, Maths and Science/Technology.
• Many of our early careers roles are subject to Security Clearance and Trade Control restrictions which mean that your place of birth, nationality, citizenship, or residency you hold or have held may impact which roles you are eligible for. Further details are available at United Kingdom Security Vetting: clearance levels - GOV.UK (www.gov.uk). For our early careers roles, you must be able to achieve BPSS (Baseline security) and many of them require you to be eligible for full Security Clearance.

What you'll get:
We will provide you with a supportive and engaging environment where you can grow your
career.

In addition, you'll benefit from:

• Fully funded qualification
• Personal development training and opportunities
• Minimum 28 days holiday allowance including bank holidays
• Competitive pension scheme
• Employee share scheme
• Flexible benefits including cycle to work scheme and employee shopping savings portal

You'll also have the chance to get involved in our STEM outreach activities and volunteering opportunities, which our apprentices find incredibly rewarding.

Your career development:
It's hard to beat the variety of fantastic opportunities and business experiences you'll receive. You can expect real world encounters and exposure to exciting projects that will really help you navigate where you want to take your career.

Plus, when you join us, you'll be automatically enrolled onto our Apprentice Development Programme.

Through a series of digital and face to face sessions, presented by wellbeing and performance experts and our external partners, we will equip you with the knowledge and tools you need to thrive and perform at your very best on your programme and beyond.

Closing dates:
Please be aware that if there is a high level of interest in this programme, applications may close earlier than advertised. To give yourself the best chance of being considered for a place on this programme, please submit your application as early as possible

#babdestnuc

Proud member of the Disability Confident employer scheme

What skills and experience we're looking for

Are you a visionary leader ready for your next career move?

Plympton Academyis seeking to appoint a high-quality Head of Design, Technology and Engineering.

You will join a committed team of Teachers and will be instrumental in providing an outstanding education at the Academy. The successful candidate will be a creative and dynamic practitioner who implements an engaging and effective curriculum that enthuses and engages students of all abilities and ages, while maintaining high expectations to ensure that every student reaches their full potential.

As Head of Design, Technology and Engineering you will lead by example, develop, inspire and motivate your team and be committed to achieving high standards. You will be looking to enable our young people to achieve their very best. This is an excellent opportunity for an outstanding teacher who is now looking for promotion to Head of Department in a supportive and successful Academy or for an established Head of Design Technology and Engineering looking to continue the improvement journey that this department has already successfully started.

This is an exciting time to join our organisation as we expand our network of schools, building upon our established ethos and values.You will benefit from avast support network including senior leaders, fellow teachers within the school and across the South West Hub and our Trust.

What you will need to succeed:

For a full list of responsibilities please see the attached Job Description

• To develop, implement and quality assure an effective curriculum for Key stages 3, 4 and 5
• Be passionate about teaching and learning and have a positive outlook and excellent interpersonal skills
• Good or Outstanding classroom practice with high expectations for achievements and behaviour
• High expectations for yourself and the students ensure that all of our students achieve their very best
• An aspiring leader of learning and happy to grasp exciting CPD opportunities
• Contribute to the values, ethos and the development of our schools

As Head of Department;

• Effectively line manage staff within the department
• Plan and lead department meetings with a focus on whole school priorities
• Be a strong, visible presence within the department insisting on the highest standards of teaching, learning and behaviour

What the school offers its staff

At Plympton Academy we believe in inspiring a culture of success for all, including our staff. We have a strong culture of staff development and support - high quality CPD, based on research and evidenced best practice, which is prioritised and supported through a tailored coaching programme.

We work collaboratively with the best schools locally and nationally so that all teachers continue to thrive and engage in the latest teaching developments and practice. We prioritise good behaviour and strong pastoral support so that learning is disruption-free, teachers can teach and students’ can focus. As a result, we are incredibly proud of our students and staff who love the challenge of learning, are equipped to achieve their dreams and take pride in their success.

What our Trust will offer you:

• Competitive Pay Scales: Our TSAT pay scales exceed national standards.
• Collaborative Support: Benefit from resources, mentoring, and school visits across the Trust to enhance your teaching and learning.
• Professional Development: Explore excellent CPD opportunities, including tailored programs for Early Career, Middle, and Senior Leadership.
• Chartered Teacher Recognition: As an accredited Chartered Teacher organization, you can achieve recognition as a Chartered Teacher.
• Cutting-Edge Pedagogy: Experience an internationally accredited approach to thinking and learning, proven to elevate classroom practice.
• Teachers’ Pension Scheme Membership: Secure your future with membership in the Teachers’ Pension Scheme.
• Staff Wellbeing Focus: Access our 24/7 Employee Assistance Programme, free flu vaccinations, and eye care vouchers.
• Convenient Parking: Park for free in our staff car park.
• Cycle to Work Scheme: Promote health and sustainability through our Cycle to Work initiative.
• TSTARS Staff Recognition: Be part of our Staff Recognition Programme, with seasonal rewards for all staff.
• Refer a Friend: Spread the word and benefit from our Refer a Friend Scheme.
• TSAT Benefits portal: a one-stop shop benefits hub that gives you access to a range of exclusive benefits including employee discounts, dental cover, Cycle to Work Scheme and Discounted Gym Membership.
• Fitness and Wellness:Enjoy reduced membership fees for our fully-equipped fitness suite and classes, conveniently located at Plympton Academy.
• Blue Light Card:School staff can now access the Blue Light Card for discounts across a wide range of categories including holidays, cars, days out and much more!
• TSAT Benefits Portal: a one-stop shop benefits hub that gives you access to a range of exclusive benefits including employee discounts, dental cover, Cycle to Work Scheme and Discounted Gym Membership.

Commitment to safeguarding

We are committed to safeguarding and promoting the welfare of children and young people and expect all staff and volunteers to share this commitment. All posts are subject to an enhanced DBS check. As per KCSIE we will also undertake online searches for all shortlisted candidates, if you have any questions regarding this process please email recruitment@tsatrust.org.uk

About the role
An exciting opportunity has arisen to join the Faculty of Construction and the Built Environment at Exeter College working as part of the Professional Studies department which includes Civil Engineering, Building Services and Construction Mangement. This department has seen huge growth in apprentices and full-time learners as well as substantial investment into staff, facility and equipment over the last few years and this role is to support this growth. This is a fantastic opportunity for anyone with industry experience in Civils/Construction with a can-do attitude, offering excellent prospects for personal development.

The role focuses on supporting the teaching, learning and assessment activities that take place within the workshop for both 6th form learners and apprentices. This includes preparation of materials for use, maintaining and developing a safe and stimulating learning and working environments, issuing and ordering of tools and equipment, manufacturing of products to support assessment using machinery and for more confident/experienced staff there will also be opportunities to teach. This will be via a development programme where you will receive a mentor and undertake a L3 teaching qualification funded by the college, with excellent progression routes.

About you
We offer courses to students that range from basic to advanced levels and support is required to meet the needs of these learners. Ideal candidates will have significant industry skills and experience, have a good worth ethic and be a reliable and positive team member. If you have experience of working within a Construction team and the drive and passion to deliver outstanding support to learners, then we would like to hear from you.

About us
Ambition, Collaboration, Energy. These are our values. Watch this short video to learn more.

And see what our staff have to say here.

Benefits
We’ll give you incredibly generous holidays and a superb pension scheme. You’ll also get a package of amazing benefits, including free counselling and discounted supermarket shopping, spa treatments, electric cars and paddleboarding. Read more on our careers page.

If you are in the first 5 years of your FE teaching career, you may be able to claim a Targeted Retention Incentive payment (formerly Levelling Up Premium) payment of up to £5,000, subject to eligibility criteria.
If you would like to find out more, come along to our open event on Thursday 26th September 2024 5:00pm-7:30pm at Falcon House, Sowton Industrial Estate, Exeter, EX2 7LB. This will be great opportunity to chat with the team and have a tour of our amazing facilities.

Applying for the role
If you’re reading this on our website, click on the apply button, below.
If you’re reading this advert on another site, visit our vacancies page.

Closing date: midnight Sunday 29th September 2024.

Interviews will be held on Tuesday 8th October 2024 at Falcon House, Sowton Industrial Estate, EX2 7LB.
No CVs or agencies please.

Everyone’s welcome to apply for a role here, regardless of personal characteristics, including race, age, gender, religion, ability, disability, or sexuality.

We’re totally committed to the safeguarding and welfare of all our students, and we expect you to be too. We follow safer recruitment statutory guidance (Keeping Children Safe in Education). If you’re successful, you’ll be required to complete thorough pre-employment checks, including an enhanced DBS check and satisfactory references. All posts at Exeter College are exempt from the Rehabilitation of Offenders Act (ROA) 1974. The amendments to the ROA 1974 (Exceptions Order 1975, (amended 2013 and 2020)) mean that when applying for certain jobs and activities, certain spent convictions and cautions are ‘protected’, so they do not need to be disclosed to employers, and if they are disclosed, employers cannot take them into account. The MOJ’s guidance on the Rehabilitation of Offenders Act 1974 and the Exceptions Order 1975, provides information about which convictions must be declared during job applications, related exceptions and further information.

Job Title: Engineering Design Manager (Defuel)
Location: Plymouth, Devon + Hybrid Working
Compensation: £56,837 - £63,567 + Benefits
Role Type: Full time / Permanent
Role ID: SF54741

At Babcock we're working to create a safe and secure world, together, and if you join us, you can play your part as an Engineering Design Manager at our Devonport Royal Dockyard site.

The role

As Engineering Design Manager, you'll have a role that's out of the ordinary. This is an exciting opportunity to join a developing part of the business undergoing significant transformation to support the Devonport Facilities requirements of the Future Maritime Support Programme. Due to the regulatory framework in which we work, the application of Babcock's Business Management System is key.

Day to day, you'll be responsible for managing the technical aspects of a project, from identification of the need through to handover, acting as the Technical Authority single point of contact, organising and leading resources as the project demands.

Responsibilities will also include:

• Scoping and managing the technical delivery of projects throughout their lifecycle
• Supporting the Design Management Group to manage the development and delivery of complex design solutions within safety critical facilities, to quality, time and budget
• Securing, organising and leading internal and external resources as the project demands
• Ensuring that design outputs are fit for purpose and delivered within agreed budgetary and schedule constraints
• Developing and applying a structured design process in a proportionate manner that reflects conventional and nuclear facility applications

This role is full time 36 hours and is based onsite at Devonport Royal Dockyard with hybrid working from home arrangements.

Essential experience of the Engineering Design Manager

• Have a strong technical background and demonstrate excellent communication and interpersonal skills due to the levels of stakeholder management required by the role
• Sound understanding of designing and substantiating solutions for safety-critical applications, gained within a Nuclear environment (Ex Royal Navy Operator or experience dealing with radiological waste)
• Experience of the design lifecycle and a logical approach to problem solving

Qualifications for the Design Manager

• You will hold a Degree in a STEM subject (or be able to demonstrate equivalent experience)
• Registered as a Chartered/Incorporated Engineer. If not registered then you should be able to evidence that you are working towards this, along with holding membership of a relevant professional institution

Security Clearance

The successful candidate must be able to achieve and maintain Security Check (SC) security clearance for this role.

Many of the positions within our company are subject to national security clearance and Trade Control restrictions. This means that your eligibility for certain roles may be affected by your place of birth, nationality, current or former citizenship, and any residency you hold or have held.

Our Benefits

• Generous holiday allowance
• Contributory Pension scheme, with life assurance
• Employee share scheme
• Employee shopping savings portal
• Payment of Professional Fees
• Reservists in the armed forces receive 10 days special paid leave
• Holiday Trading is a benefit that allows the majority of employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement
• 'Be Kind Day' enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charity

Babcock International
For over 130 years Babcock International have helped to defend nations, protect communities and build a better world. To continue, we must adapt, advance and be a sustainable business with a shared goal.

If you have a disability or need any reasonable adjustments during the application and selection stages, please let us know. We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview.


#BABDESTNUC

Proud member of the Disability Confident employer scheme

Production Technician (Engineering Technician)

Plymouth, Devon.

Full Time, Permanent

£34,200 + Excellent Benefits Package including 10% pension contribution!

3 on 3 off- DAYS ONLY 07:00- 19:00

We are currently partnered with one of the world's premier medical manufacturing corporations. They have been at the forefront of innovation for many decades now and show no signs of slowing down.

We are currently looking for engineering technicians to join the team on a full time, permanent basis.

We are looking for candidates that can demonstrate some engineering background but not necessarily the skill level of a qualified engineer, this is a great opportunity to join a business that can offer development into a maintenance engineering position.

The role sits above the machine operators within the structure and reporting into an engineer. You will work alongside the operators to ensure efficient upkeep of machinery, conducting first line fault finding, service and repair on production/process machinery.

To be successful in this role, you should meet the following requirements:

• Level 2 or 3 qualified in a relevant engineering subject.
• Some hands-on experience within any form of manufacturing or production based engineering.
• An understanding of fault finding and repair at a basic level.
• You could have worked in any mechanical or electrical position previously.
• Job titles could have included: Fitter, technician, craftsman, assembly, service, maintenance, repair, technical operator, manufacturing technician, production technician and other similar titles.

This is a fantastic opportunity for candidates with some exposure to engineering, that want to develop their career while working for one of the most impressive manufacturing businesses in the world.

Key words: cmms, maintenance, repair, engineering, engineer, mechanical, electrical motors, drives, gearboxes, machinery, PLC, production, manufacturing

Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.

Candidates must be eligible to live and work in the UK.

For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Job title: Senior Engineering Designer
Job Type: Contract
Start date: ASAP - Subject to clearance
Duration: 52 weeks
Salary/ Pay rate/ Benefits: Depending on experience
Location: Devonport
Hours of work: 37 hours per week

Applicants must have experience of the following:
- HNC/HND relating to Civil Engineering
- Experience leading a design team
- Commercial or defense project experience
- Highly regulated industry experience
- Incorporated engineer status or working towards it
- Awareness of relevant building structure codes, preferably seismic
- Demonstrable technical design development skills
- Ability to use relevant computer applications

Role information:

- Ensure health and safety policies and procedures are adhered to
- Liaise with staff and contractors to ensure risks and hazards are fully understood
- Allocate design tasks to the relevant parties
- Check produced design drawings and ensure they meet specifications
- Provide technical advice to the design team
- Contribute to the preparation and production of design drawings in line with time, cost and quality requirements
- Carry out design reviews
- Resolve technical queries

Interested in this position? please click "apply now"
We try to respond to all applicants, but sometimes this is not possible due to high volumes of applications; if you have not heard from us within 14 days, regrettably it means you have been unsuccessful on this occasion.
This contract vacancy is being advertised by Rullion Ltd
Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands, to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates.

Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base; from small start-ups to large household names.
We celebrate and support diversity and are committed to ensuring equal opportunities for both employees and applicants.

Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants.

Job Title: Package Manager
Location: Plymouth, Devon
Compensation: £49,943.00 + Benefits
Role Type: Full time / Permanent
Role ID: SF58251

At Babcock we're working to create a safe and secure world, together, and if you join us, you can play your part as a Package Manager at our Devonport Royal Dockyard site.

The role
As a Package Manager, you'll have a role that's out of the ordinary. You will have the opportunity to join our business and be part of delivering world class engineering support services to the Royal Navy.

Day-to-day, you'll be required to co-ordinate and manage the planning, estimating, delivery, close out and archiving of planned Fleet Time Support Period (FTSP) work packages, unplanned work (UPW), Alterations & Additions (A&As), Deployed Support Periods (DSP) and Docking Essential Defect Survey (DEDS) periods.

• Act as the main point of contact for the overall management of programmed and un-programmed work packages, producing schedules and working with relative stakeholders including the Class Output Management team (COM) and ships' staff.
• Chair and facilitate FTSP service provider meetings including take-on, plan of the day, weekly progress and close-out meetings.
• Identify and de-conflict other work on board to ensure success of the FTSP/UPW/DEDS/DSP & A&A's without detriment to the whole ship's programme.
• Sub-contractor management and liaison with customers and suppliers.

This role is full time, 35 hours per week and is based on site at Devonport Royal Dockyard.

Essential experience of the Package Manager

• An understanding of project management principles (Prince 2 / APM / Lean Six Sigma).
• Excellent teamwork, problem solving, real time decision making, interpersonal and communication skills are required, along with the drive and enthusiasm to work in a challenging role within a busy and highly successful team.
• Computer literacy skills essential, Microsoft packages (Excel, Word, Outlook, Teams, SharePoint).
• An understanding of contracts and financial controls (desirable).

Qualifications for the Package Manager

• An HNC/HND in an Engineering/Technical subject, or equivalent experience in an engineering role.

Security Clearance
The successful candidate must be able to achieve and maintain Security Check (SC) security clearance for this role.

Many of the positions within our company are subject to national security clearance and Trade Control restrictions. This means that your eligibility for certain roles may be affected by your place of birth, nationality, current or former citizenship, and any residency you hold or have held.

What we offer

• Generous holiday allowance
• Contributory Pension scheme, with life assurance
• Employee share scheme
• Employee shopping savings portal
• Payment of Professional Fees
• Reservists in the armed forces receive 10-days special paid leave
• Holiday Trading is a benefit that allows the majority of employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement
• 'Be Kind Day' enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charity
• Opportunity to work with innovative technology.
• Potential to develop skills.

Babcock International
For over a century Babcock has helped to defend nations, protect communities and build a better world. To continue, we must adapt, advance and be a sustainable business with a shared goal.

We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please email with the subject header 'Reasonable adjustments requirement'. We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview.

Closing date: 08/07/2024

Proud member of the Disability Confident employer scheme

Job Title: Engineering Design Manager (Defuel)
Location: Plymouth, Devon + Hybrid Working
Compensation: £56,837 - £63,567 + Benefits
Role Type: Full time / Permanent
Role ID: SF54741

At Babcock we're working to create a safe and secure world, together, and if you join us, you can play your part as an Engineering Design Manager at our Devonport Royal Dockyard site.

The role

As Engineering Design Manager, you'll have a role that's out of the ordinary. This is an exciting opportunity to join a developing part of the business undergoing significant transformation to support the Devonport Facilities requirements of the Future Maritime Support Programme. Due to the regulatory framework in which we work, the application of Babcock's Business Management System is key.

Day to day, you'll be responsible for managing the technical aspects of a project, from identification of the need through to handover, acting as the Technical Authority single point of contact, organising and leading resources as the project demands.

Responsibilities will also include:

• Scoping and managing the technical delivery of projects throughout their lifecycle
• Supporting the Design Management Group to manage the development and delivery of complex design solutions within safety critical facilities, to quality, time and budget
• Securing, organising and leading internal and external resources as the project demands
• Ensuring that design outputs are fit for purpose and delivered within agreed budgetary and schedule constraints
• Developing and applying a structured design process in a proportionate manner that reflects conventional and nuclear facility applications

This role is full time 36 hours and is based onsite at Devonport Royal Dockyard with hybrid working from home arrangements.

Essential experience of the Engineering Design Manager:

• Have a strong technical background and demonstrate excellent communication and interpersonal skills due to the levels of stakeholder management required by the role
• Sound understanding of designing and substantiating solutions for safety-critical applications, gained within a Nuclear environment (Ex Royal Navy Operator or experience dealing with radiological waste)
• Experience of the design lifecycle and a logical approach to problem solving

Qualifications for the Design Manager:

• You will hold a Degree in a STEM subject (or be able to demonstrate equivalent experience)
• Registered as a Chartered/Incorporated Engineer. If not registered then you should be able to evidence that you are working towards this, along with holding membership of a relevant professional institution

The successful candidate must be able to achieve SC security clearance level for this role.

Our Benefits

• Generous holiday allowance
• Contributory Pension scheme, with life assurance
• Employee share scheme
• Employee shopping savings portal
• Payment of Professional Fees
• Reservists in the armed forces receive 10 days special paid leave
• Holiday Trading is a benefit that allows the majority of employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement
• 'Be Kind Day' enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charity

Babcock International
For over 130 years Babcock International have helped to defend nations, protect communities and build a better world. To continue, we must adapt, advance and be a sustainable business with a shared goal.

If you have a disability or need any reasonable adjustments during the application and selection stages, please let us know. We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview.

#LI-HYBRID
#BABDESTNUC

Proud member of the Disability Confident employer scheme

Due to winning new contracts for 2024 we are looking for individuals to add to our current team and create an agile/flexible workforce to carry out a number of manufacturing processes around the business. We are looking for individuals who can, through training, grow and develop.
Individuals who take pride in their work and also have a good eye for quality. You will need to have good attention to detail and excellent timekeeping. If you are able to carry out repetitive tasks accurately and effectively, and are positive, proactive and hardworking you will be taught how to operate various types of sheet metal machinery and associated processes.
No experience is necessary because you will receive extensive and supportive on the job training.

Work alongside qualified engineers, who can act as a mentor providing valuable knowledge.


Apply the theory you've learnt at college and translate it into practice to develop your practical engineering skills.


Extend your knowledge of Health and Safety in the workplace within an engineering environment.

Training
You will attend Exeter College 2 days a week during term time and learn whilst on the job.

Qualifications required
Grade 4/C in Maths and English.

Skills required
Basic understanding of Health & Safety

Prospects
Opportunity to progress onto the Level 3 Apprenticeship, and join the team as a full-time qualified staff member.
Qualification / Standard : ST0537 Engineering operative
Duration 12 Months

Engineering Assistant - Permanent + Overtime & Annual bonus

£13.00 per hour

Want to get into an engineering field and learn new skills?

If so, this could be the perfect role for you…

We are looking for an Engineering Labourer to join a well establish engineering company in the Cullompton area.

Duties include:

• Cutting and preparing steel, grinding, shot blasting
• General workshop duties
• Setting up and clearing away tools and equipment

Engineering labourer skills / attributes:

• Good work ethics as well as honesty and reliability is essential.
• Some knowledge of basic health and safety awareness and correct use of personal protective equipment
• CSCS Card an advantage however not essential

Training will be provided for the right candidates where required.

If you have some relevant experience and want to learn new skills, look no further apply today.

Acorn by Synergie acts as an employment agency for permanent recruitment.

Proud member of the Disability Confident employer scheme

Job Title: Engineering Design Manager
Location: Plymouth, Devon + Hybrid Working Arrangements
Compensation: £49,943 - £55,870 + Benefits
Role Type: Full time / Permanent
Role ID: SF57120

At Babcock we're working to create a safe and secure world, together, and if you join us, you can play your part as an Engineering Design Manager at our Devonport Royal Dockyard site.

The role
As Engineering Design Manager, you'll have a role that's out of the ordinary. This is an exciting opportunity to join a developing part of the business undergoing significant transformation to support the Devonport Facilities requirements of the Future Maritime Support Programme.

Day to day, you'll be responsible for managing the technical aspects of a project, from identification of the need through to handover, acting as the Technical Authority single point of contact, organising and leading resources as the project demands.

Responsibilities will also include:

• Scoping and managing the technical delivery of projects throughout their lifecycle
• Supporting the Design Management Group to manage the development and delivery of complex design solutions within safety critical facilities, to quality, time and budget
• Securing, organising and leading internal and external resources as the project demands
• Ensuring that design outputs are fit for purpose and delivered within agreed budgetary and schedule constraints
• Developing and applying a structured design process in a proportionate manner that reflects conventional and nuclear facility applications

This role is full time, 35 hours per week provides hybrid working arrangements with 2 days in the office/onsite and 3 days working from home.

Essential experience of the Engineering Design Manager

• Have a strong technical background and demonstrate excellent communication and interpersonal skills due to the levels of stakeholder management required by the role
• Sound understanding of designing and substantiating solutions for safety-critical applications, gained ideally from a regulated industry
• Experience of the design lifecycle and a logical approach to problem solving

Qualifications for the Engineering Design Manager

• You will hold a Degree in a STEM subject (or be able to demonstrate equivalent experience)
• Registered as a Chartered/Incorporated Engineer. If not registered then you should be able to evidence that you are working towards this, along with holding membership of a relevant professional institution

Security Clearance

The successful candidate must be able to achieve and maintain Security Check (SC) security clearance for this role.

Many of the positions within our company are subject to national security clearance and Trade Control restrictions. This means that your eligibility for certain roles may be affected by your place of birth, nationality, current or former citizenship, and any residency you hold or have held. Further details are available at United Kingdom Security Vetting: clearance levels - GOV.UK (www.gov.uk)

What we offer

• Generous holiday allowance
• Contributory Pension scheme, with life assurance
• Employee share scheme
• Employee shopping savings portal
• Payment of Professional Fees
• Reservists in the armed forces receive 10-days special paid leave
• Holiday Trading is a benefit that allows the majority of employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement
• 'Be Kind Day' enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charity
• Flexible working - we give people more options to better integrate their work and personal life, whilst ensuring that business needs are met.
• Growth opportunities.
• Opportunity to work on some of the most exciting engineering projects this country has to offer.

Babcock International
For over a century Babcock has helped to defend nations, protect communities and build a better world. To continue, we must adapt, advance and be a sustainable business with a shared goal.

We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please email with the subject header 'Reasonable adjustments requirement'. We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview.

Closing date: 23/05/2024

#BABDESTNUC
#IND-ENG

Proud member of the Disability Confident employer scheme

We are looking for up to two apprentices to be placed in the Fabrication and Welding department or potentially in the CNC section.You should show a keen interest in this area of engineering and have a knowledge of what the role requires. Primarily in the Fabrication department, you will be learning all aspects of welding, including but not limited to MiG; TiG; Robotic Welding; Gas and Arc. You will have the opportunity to programme and operate the latest Mazak, Fibre Laser cutting machine with multi pallets, You will be trained in the operation and programming of a Panasonic Robotic welding cell that is serviced by a Kuka, pick and place robot, collecting and placing components for welding. Further skills will be gained in the many processes undertaken, whilst producing a variety of products used throughout the world, these skills to include: cutting; drilling; bending; rolling and forming. This will be complimented with day release training at Exeter Technology College, for the duration of your apprenticeship. To compliment this training, there are opportunities for movement within the factory to gain knowledge of other machining processes, to include CNC Turning and Milling on many new multi axis, multi-pallet machines in the Rotolok Group. Full attendance at college is required and holidays are expected to be taken to coincide with college holidays were possible. Whilst in the factory, you will be expected to work in a safe manor at all times, respecting the safety of others around you. Full PPE will be provided and all tools required to complete the task are made available. You will receive full training on the processes or machines that you will be working on.


Training
As an apprentice you will be required to attend college for two days a week in the first year, with one day a week in the subsequent years. You will also learn whilst on the job.


Qualifications required
Grade 4/C in Maths and English or equivalent.

Skills required
As an apprentice you will need to be able to: study at college for a further 4 years or more; have an understanding of engineering processes; be able to work within a team; be organised; be able to concentrate at all times and understand the risks involved before you commence any work.

Prospects
Rotolok will give you the opportunity to study for your HNC following the completion of your Level 3 apprenticeship. We invest in the latest advanced machinery and technologies, so your skills are current with other leading firms.

Qualification / Standard : ST0537 Engineering operative
Duration 12 Months